Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Cezary Rojewski <cezary.rojewski@intel.com>
To: alsa-devel@alsa-project.org
Cc: pierre-louis.bossart@linux.intel.com,
	Cezary Rojewski <cezary.rojewski@intel.com>,
	lgirdwood@gmail.com, tiwai@suse.com, vkoul@kernel.org,
	broonie@kernel.org
Subject: [PATCH 1/7] ASoC: Intel: Skylake: Remove superfluous chip initialization
Date: Thu,  5 Mar 2020 15:53:08 +0100	[thread overview]
Message-ID: <20200305145314.32579-2-cezary.rojewski@intel.com> (raw)
In-Reply-To: <20200305145314.32579-1-cezary.rojewski@intel.com>

Skylake driver does the controller init operation twice:
- first during probe (only to stop it just before scheduling probe_work)
- and during said probe_work where the actual correct sequence is
executed

To properly complete boot sequence when iDisp codec is present, bus
initialization has to be called only after _i915_init() finishes.
With additional _reset_list preceding _i915_init(), iDisp codec never
gets the chance to enumerate on the link. Remove the superfluous
initialization to address the issue.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
---
 sound/soc/intel/skylake/skl.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index f755ca2484cf..d66231525356 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -803,6 +803,9 @@ static void skl_probe_work(struct work_struct *work)
 			return;
 	}
 
+	skl_init_pci(skl);
+	skl_dum_set(bus);
+
 	err = skl_init_chip(bus, true);
 	if (err < 0) {
 		dev_err(bus->dev, "Init chip failed with err: %d\n", err);
@@ -918,8 +921,6 @@ static int skl_first_init(struct hdac_bus *bus)
 		return -ENXIO;
 	}
 
-	snd_hdac_bus_reset_link(bus, true);
-
 	snd_hdac_bus_parse_capabilities(bus);
 
 	/* check if PPCAP exists */
@@ -967,11 +968,7 @@ static int skl_first_init(struct hdac_bus *bus)
 	if (err < 0)
 		return err;
 
-	/* initialize chip */
-	skl_init_pci(skl);
-	skl_dum_set(bus);
-
-	return skl_init_chip(bus, true);
+	return 0;
 }
 
 static int skl_probe(struct pci_dev *pci,
@@ -1064,8 +1061,6 @@ static int skl_probe(struct pci_dev *pci,
 	if (bus->mlcap)
 		snd_hdac_ext_bus_get_ml_capabilities(bus);
 
-	snd_hdac_bus_stop_chip(bus);
-
 	/* create device for soc dmic */
 	err = skl_dmic_device_register(skl);
 	if (err < 0) {
-- 
2.17.1


  reply	other threads:[~2020-03-05 14:56 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-05 14:53 [PATCH 0/7] ASoC: Intel: Skylake: Fix HDaudio and Dmic Cezary Rojewski
2020-03-05 14:53 ` Cezary Rojewski [this message]
2020-03-06 20:52   ` [PATCH 1/7] ASoC: Intel: Skylake: Remove superfluous chip initialization Pierre-Louis Bossart
2020-03-09 13:57     ` Cezary Rojewski
2020-03-09 16:48       ` Pierre-Louis Bossart
2020-03-09 17:43         ` Cezary Rojewski
2020-03-09 18:41           ` Pierre-Louis Bossart
2020-03-10 17:45   ` Applied "ASoC: Intel: Skylake: Remove superfluous chip initialization" to the asoc tree Mark Brown
2020-03-05 14:53 ` [PATCH 2/7] ASoC: Intel: Skylake: Select hda configuration permissively Cezary Rojewski
2020-03-06 20:57   ` Pierre-Louis Bossart
2020-03-09 13:47     ` Cezary Rojewski
2020-03-09 17:03       ` Pierre-Louis Bossart
2020-03-10  9:30         ` Cezary Rojewski
2020-03-10 17:45   ` Applied "ASoC: Intel: Skylake: Select hda configuration permissively" to the asoc tree Mark Brown
2020-03-05 14:53 ` [PATCH 3/7] ASoC: Intel: Skylake: Enable codec wakeup during chip init Cezary Rojewski
2020-03-10 17:44   ` Applied "ASoC: Intel: Skylake: Enable codec wakeup during chip init" to the asoc tree Mark Brown
2020-03-05 14:53 ` [PATCH 4/7] ASoC: Intel: Skylake: Shield against no-NHLT configurations Cezary Rojewski
2020-03-06 21:03   ` Pierre-Louis Bossart
2020-03-09 13:03     ` Cezary Rojewski
2020-03-09 17:01       ` Pierre-Louis Bossart
2020-03-09 17:38         ` Cezary Rojewski
2020-03-09 18:40           ` Pierre-Louis Bossart
2020-03-10 17:44   ` Applied "ASoC: Intel: Skylake: Shield against no-NHLT configurations" to the asoc tree Mark Brown
2020-03-05 14:53 ` [PATCH 5/7] ASoC: Intel: skl_hda_dsp: Enable Dmic configuration Cezary Rojewski
2020-03-06 14:46   ` Kai Vehmanen
2020-03-06 15:49     ` Pierre-Louis Bossart
2020-03-06 19:05       ` Cezary Rojewski
2020-03-06 19:49         ` Pierre-Louis Bossart
2020-03-06 19:58           ` Cezary Rojewski
2020-03-05 14:53 ` [PATCH 6/7] ASoC: Intel: Allow for ROM init retry on CNL platforms Cezary Rojewski
2020-03-10 17:44   ` Applied "ASoC: Intel: Allow for ROM init retry on CNL platforms" to the asoc tree Mark Brown
2020-03-05 14:53 ` [PATCH 7/7] ASoC: Intel: Skylake: Await purge request ack on CNL Cezary Rojewski
2020-03-10 17:44   ` Applied "ASoC: Intel: Skylake: Await purge request ack on CNL" to the asoc tree Mark Brown
2020-03-06 20:48 ` [PATCH 0/7] ASoC: Intel: Skylake: Fix HDaudio and Dmic Pierre-Louis Bossart
2020-03-09 11:38   ` Mark Brown
2020-03-09 14:02     ` Cezary Rojewski
2020-03-09 16:54       ` Mark Brown
2020-03-09 17:48         ` Cezary Rojewski
2020-03-09 17:52           ` Mark Brown
2020-03-10 16:03         ` Pierre-Louis Bossart
     [not found]           ` <2dc38392-760b-a5fc-fa00-98530729f2d3@intel.com>
2020-03-11 16:56             ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200305145314.32579-2-cezary.rojewski@intel.com \
    --to=cezary.rojewski@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=tiwai@suse.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox