Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ion Agorria <AG0RRIA@yahoo.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Stephen Warren <swarren@nvidia.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Takashi Iwai <tiwai@suse.com>,
	Jaroslav Kysela <perex@perex.cz>,
	Rob Herring <robh+dt@kernel.org>,
	Svyatoslav Ryhel <clamor95@gmail.com>,
	Ion Agorria <ion@agorria.com>, Dmitry Osipenko <digetx@gmail.com>
Cc: linux-tegra@vger.kernel.org, devicetree@vger.kernel.org,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 2/2] ASoC: tegra: Add RT5631 machine driver
Date: Sun, 31 Jan 2021 19:41:01 +0100	[thread overview]
Message-ID: <20210131184101.651486-3-AG0RRIA@yahoo.com> (raw)
In-Reply-To: <20210131184101.651486-1-AG0RRIA@yahoo.com>

From: Svyatoslav Ryhel <clamor95@gmail.com>

Add Tegra ASoC driver for Realtek ALC5631/RT5631 codec. The RT5631
codec is found on devices like ASUS Transformer TF201, TF700T and other
Tegra-based Android tablets.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
---
 sound/soc/tegra/Kconfig        |   8 +
 sound/soc/tegra/Makefile       |   2 +
 sound/soc/tegra/tegra_rt5631.c | 261 +++++++++++++++++++++++++++++++++
 3 files changed, 271 insertions(+)
 create mode 100644 sound/soc/tegra/tegra_rt5631.c

diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig
index acaf7339168d..449a858f155d 100644
--- a/sound/soc/tegra/Kconfig
+++ b/sound/soc/tegra/Kconfig
@@ -126,6 +126,14 @@ config SND_SOC_TEGRA_AUDIO_GRAPH_CARD
 	  few things for Tegra audio. Most of the code is re-used from
 	  audio graph driver and the same DT bindings are used.
 
+config SND_SOC_TEGRA_RT5631
+	tristate "SoC Audio support for Tegra boards using an RT5631 codec"
+	depends on SND_SOC_TEGRA && I2C && GPIOLIB
+	select SND_SOC_RT5631
+	help
+	  Say Y or M here if you want to add support for SoC audio on Tegra
+	  boards using the RT5631 codec, such as Transformer.
+
 config SND_SOC_TEGRA_RT5640
 	tristate "SoC Audio support for Tegra boards using an RT5640 codec"
 	depends on SND_SOC_TEGRA && I2C && GPIOLIB
diff --git a/sound/soc/tegra/Makefile b/sound/soc/tegra/Makefile
index af0b9889306c..11debfc03bc4 100644
--- a/sound/soc/tegra/Makefile
+++ b/sound/soc/tegra/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_SND_SOC_TEGRA186_DSPK) += snd-soc-tegra186-dspk.o
 obj-$(CONFIG_SND_SOC_TEGRA210_ADMAIF) += snd-soc-tegra210-admaif.o
 
 # Tegra machine Support
+snd-soc-tegra-rt5631-objs := tegra_rt5631.o
 snd-soc-tegra-rt5640-objs := tegra_rt5640.o
 snd-soc-tegra-rt5677-objs := tegra_rt5677.o
 snd-soc-tegra-wm8753-objs := tegra_wm8753.o
@@ -41,6 +42,7 @@ snd-soc-tegra-max98090-objs := tegra_max98090.o
 snd-soc-tegra-sgtl5000-objs := tegra_sgtl5000.o
 snd-soc-tegra-audio-graph-card-objs := tegra_audio_graph_card.o
 
+obj-$(CONFIG_SND_SOC_TEGRA_RT5631) += snd-soc-tegra-rt5631.o
 obj-$(CONFIG_SND_SOC_TEGRA_RT5640) += snd-soc-tegra-rt5640.o
 obj-$(CONFIG_SND_SOC_TEGRA_RT5677) += snd-soc-tegra-rt5677.o
 obj-$(CONFIG_SND_SOC_TEGRA_WM8753) += snd-soc-tegra-wm8753.o
diff --git a/sound/soc/tegra/tegra_rt5631.c b/sound/soc/tegra/tegra_rt5631.c
new file mode 100644
index 000000000000..9034f48bcb26
--- /dev/null
+++ b/sound/soc/tegra/tegra_rt5631.c
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tegra_rt5631.c - Tegra machine ASoC driver for boards using RT5631 codec.
+ *
+ * Copyright (c) 2020, Svyatoslav Ryhel and Ion Agorria
+ *
+ * Based on code copyright/by:
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Stephen Warren <swarren@nvidia.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <sound/core.h>
+#include <sound/jack.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include "tegra_asoc_utils.h"
+
+#include "../codecs/rt5631.h"
+
+struct tegra_rt5631 {
+	struct tegra_asoc_utils_data util_data;
+	struct gpio_desc *gpiod_hp_mute;
+	struct gpio_desc *gpiod_hp_det;
+};
+
+static int tegra_rt5631_hw_params(struct snd_pcm_substream *substream,
+				  struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_card *card = rtd->card;
+	struct tegra_rt5631 *machine = snd_soc_card_get_drvdata(card);
+	unsigned int srate, mclk;
+	int err;
+
+	srate = params_rate(params);
+	switch (srate) {
+	case 64000:
+	case 88200:
+	case 96000:
+		mclk = 128 * srate;
+		break;
+	default:
+		mclk = 256 * srate;
+		break;
+	}
+	/* FIXME: Codec only requires >= 3MHz if OSR==0 */
+	while (mclk < 6000000)
+		mclk *= 2;
+
+	err = tegra_asoc_utils_set_rate(&machine->util_data, srate, mclk);
+	if (err < 0) {
+		dev_err(card->dev, "Can't configure clocks\n");
+		return err;
+	}
+
+	err = snd_soc_dai_set_sysclk(codec_dai, 0, mclk, SND_SOC_CLOCK_IN);
+	if (err < 0) {
+		dev_err(card->dev, "codec_dai clock not set\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops tegra_rt5631_ops = {
+	.hw_params = tegra_rt5631_hw_params,
+};
+
+static struct snd_soc_jack tegra_rt5631_hp_jack;
+
+static struct snd_soc_jack_pin tegra_rt5631_hp_jack_pins[] = {
+	{
+		.pin = "Headphone Jack",
+		.mask = SND_JACK_HEADPHONE,
+	},
+};
+
+static struct snd_soc_jack_gpio tegra_rt5631_hp_jack_gpio = {
+	.name = "Headphone detection",
+	.report = SND_JACK_HEADPHONE,
+	.debounce_time = 150,
+};
+
+static int tegra_rt5631_event_hp(struct snd_soc_dapm_widget *w,
+				 struct snd_kcontrol *k, int event)
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct snd_soc_card *card = dapm->card;
+	struct tegra_rt5631 *machine = snd_soc_card_get_drvdata(card);
+
+	gpiod_set_value_cansleep(machine->gpiod_hp_mute,
+				 !SND_SOC_DAPM_EVENT_ON(event));
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget tegra_rt5631_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("Int Spk", NULL),
+	SND_SOC_DAPM_HP("Headphone Jack", tegra_rt5631_event_hp),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+	SND_SOC_DAPM_MIC("Int Mic", NULL),
+};
+
+static const struct snd_kcontrol_new tegra_rt5631_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Int Spk"),
+	SOC_DAPM_PIN_SWITCH("Int Mic"),
+};
+
+static int tegra_rt5631_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct tegra_rt5631 *machine = snd_soc_card_get_drvdata(rtd->card);
+	int ret;
+
+	ret = snd_soc_card_jack_new(rtd->card, "Headphone Jack",
+				    SND_JACK_HEADPHONE,
+				    &tegra_rt5631_hp_jack,
+				    tegra_rt5631_hp_jack_pins,
+				    ARRAY_SIZE(tegra_rt5631_hp_jack_pins));
+	if (ret) {
+		dev_err(rtd->dev, "Headset Jack creation failed: %d\n", ret);
+		return ret;
+	}
+
+	if (machine->gpiod_hp_det) {
+		tegra_rt5631_hp_jack_gpio.desc = machine->gpiod_hp_det;
+
+		ret = snd_soc_jack_add_gpios(&tegra_rt5631_hp_jack, 1,
+					     &tegra_rt5631_hp_jack_gpio);
+		if (ret)
+			dev_err(rtd->dev, "Jack GPIOs not added: %d\n", ret);
+	}
+
+	return 0;
+}
+
+SND_SOC_DAILINK_DEFS(hifi,
+	DAILINK_COMP_ARRAY(COMP_EMPTY()),
+	DAILINK_COMP_ARRAY(COMP_CODEC(NULL, "rt5631-hifi")),
+	DAILINK_COMP_ARRAY(COMP_EMPTY()));
+
+static struct snd_soc_dai_link tegra_rt5631_dai = {
+	.name = "RT5631",
+	.stream_name = "RT5631 PCM",
+	.init = tegra_rt5631_init,
+	.ops = &tegra_rt5631_ops,
+	.dai_fmt = SND_SOC_DAIFMT_I2S |
+		   SND_SOC_DAIFMT_NB_NF |
+		   SND_SOC_DAIFMT_CBS_CFS,
+	SND_SOC_DAILINK_REG(hifi),
+};
+
+static struct snd_soc_card snd_soc_tegra_rt5631 = {
+	.name = "tegra-rt5631",
+	.owner = THIS_MODULE,
+	.dai_link = &tegra_rt5631_dai,
+	.num_links = 1,
+	.controls = tegra_rt5631_controls,
+	.num_controls = ARRAY_SIZE(tegra_rt5631_controls),
+	.dapm_widgets = tegra_rt5631_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(tegra_rt5631_dapm_widgets),
+	.fully_routed = true,
+};
+
+static int tegra_rt5631_probe(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = &snd_soc_tegra_rt5631;
+	struct device_node *np_codec, *np_i2s;
+	struct tegra_rt5631 *machine;
+	struct gpio_desc *gpiod;
+	int ret;
+
+	machine = devm_kzalloc(&pdev->dev, sizeof(*machine), GFP_KERNEL);
+	if (!machine)
+		return -ENOMEM;
+
+	card->dev = &pdev->dev;
+	snd_soc_card_set_drvdata(card, machine);
+
+	gpiod = devm_gpiod_get_optional(&pdev->dev, "nvidia,hp-mute",
+					GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod))
+		return PTR_ERR(gpiod);
+
+	machine->gpiod_hp_mute = gpiod;
+
+	gpiod = devm_gpiod_get_optional(&pdev->dev, "nvidia,hp-det",
+					GPIOD_IN);
+	if (IS_ERR(gpiod))
+		return PTR_ERR(gpiod);
+
+	machine->gpiod_hp_det = gpiod;
+
+	ret = snd_soc_of_parse_card_name(card, "nvidia,model");
+	if (ret)
+		return ret;
+
+	ret = snd_soc_of_parse_audio_routing(card, "nvidia,audio-routing");
+	if (ret)
+		return ret;
+
+	np_codec = of_parse_phandle(pdev->dev.of_node, "nvidia,audio-codec", 0);
+	if (!np_codec) {
+		dev_err(&pdev->dev,
+			"Property 'nvidia,audio-codec' missing or invalid\n");
+		return -EINVAL;
+	}
+
+	np_i2s = of_parse_phandle(pdev->dev.of_node, "nvidia,i2s-controller", 0);
+	if (!np_i2s) {
+		dev_err(&pdev->dev,
+			"Property 'nvidia,i2s-controller' missing or invalid\n");
+		return -EINVAL;
+	}
+
+	tegra_rt5631_dai.cpus->of_node = np_i2s;
+	tegra_rt5631_dai.codecs->of_node = np_codec;
+	tegra_rt5631_dai.platforms->of_node = np_i2s;
+
+	ret = tegra_asoc_utils_init(&machine->util_data, &pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = devm_snd_soc_register_card(&pdev->dev, card);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct of_device_id tegra_rt5631_of_match[] = {
+	{ .compatible = "nvidia,tegra-audio-rt5631", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, tegra_rt5631_of_match);
+
+static struct platform_driver tegra_rt5631_driver = {
+	.driver = {
+		.name = "tegra-snd-rt5631",
+		.pm = &snd_soc_pm_ops,
+		.of_match_table = tegra_rt5631_of_match,
+	},
+	.probe = tegra_rt5631_probe,
+};
+module_platform_driver(tegra_rt5631_driver);
+
+MODULE_DESCRIPTION("Tegra+RT5631 machine ASoC driver");
+MODULE_AUTHOR("Stephen Warren <swarren@nvidia.com>");
+MODULE_AUTHOR("Svyatoslav Ryhel <clamor95@gmail.com>");
+MODULE_AUTHOR("Ion Agorria <ion@agorria.com>");
+MODULE_LICENSE("GPL");
-- 
2.26.2


  parent reply	other threads:[~2021-02-03  7:03 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20210131184101.651486-1-AG0RRIA.ref@yahoo.com>
2021-01-31 18:40 ` [PATCH v1 0/2] ASoC: tegra: Add RT5631 machine driver Ion Agorria
2021-01-31 18:41   ` [PATCH v1 1/2] ASoC: dt-bindings: tegra: Add binding for RT5631 Ion Agorria
2021-02-02 13:16     ` Jon Hunter
2021-01-31 18:41   ` Ion Agorria [this message]
2021-02-02 13:22     ` [PATCH v1 2/2] ASoC: tegra: Add RT5631 machine driver Jon Hunter
2021-02-02 15:25       ` Dmitry Osipenko
2021-02-02 16:24         ` Jon Hunter
2021-02-02 16:57           ` Dmitry Osipenko
2021-02-02 17:00           ` Mark Brown
2021-02-02 15:54     ` Dmitry Osipenko
2021-02-02 13:23   ` [PATCH v1 0/2] " Jon Hunter
2021-02-03 21:42     ` Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210131184101.651486-3-AG0RRIA@yahoo.com \
    --to=ag0rria@yahoo.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=clamor95@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=digetx@gmail.com \
    --cc=ion@agorria.com \
    --cc=jonathanh@nvidia.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=swarren@nvidia.com \
    --cc=thierry.reding@gmail.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox