[PATCH AUTOSEL 5.4 13/24] ASoC: cs42l42: Always wait at least 3ms after reset

[Sasha Levin <sashal@kernel.org>]

From: Lucas Tanure <tanureal@opensource.cirrus.com>

[ Upstream commit 19325cfea04446bc79b36bffd4978af15f46a00e ]

This delay is part of the power-up sequence defined in the datasheet.
A runtime_resume is a power-up so must also include the delay.

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210305173442.195740-6-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l42.c | 3 ++-
 sound/soc/codecs/cs42l42.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 95930018a1a4..dcd2acb2c3ce 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -1796,7 +1796,7 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
 		dev_dbg(&i2c_client->dev, "Found reset GPIO\n");
 		gpiod_set_value_cansleep(cs42l42->reset_gpio, 1);
 	}
-	mdelay(3);
+	usleep_range(CS42L42_BOOT_TIME_US, CS42L42_BOOT_TIME_US * 2);
 
 	/* Request IRQ */
 	ret = devm_request_threaded_irq(&i2c_client->dev,
@@ -1921,6 +1921,7 @@ static int cs42l42_runtime_resume(struct device *dev)
 	}
 
 	gpiod_set_value_cansleep(cs42l42->reset_gpio, 1);
+	usleep_range(CS42L42_BOOT_TIME_US, CS42L42_BOOT_TIME_US * 2);
 
 	regcache_cache_only(cs42l42->regmap, false);
 	regcache_sync(cs42l42->regmap);
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index 9b017b76828a..866d7c873e3c 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -740,6 +740,7 @@
 #define CS42L42_FRAC2_VAL(val)	(((val) & 0xff0000) >> 16)
 
 #define CS42L42_NUM_SUPPLIES	5
+#define CS42L42_BOOT_TIME_US	3000
 
 static const char *const cs42l42_supply_names[CS42L42_NUM_SUPPLIES] = {
 	"VA",
-- 
2.30.1