From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
"Linh Phung T . Y ." <linh.phung.jy@renesas.com>,
alsa-devel@alsa-project.org, Mark Brown <broonie@kernel.org>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Subject: [PATCH AUTOSEL 5.11 065/104] ASoC: rsnd: call rsnd_ssi_master_clk_start() from rsnd_ssi_init()
Date: Wed, 5 May 2021 12:33:34 -0400 [thread overview]
Message-ID: <20210505163413.3461611-65-sashal@kernel.org> (raw)
In-Reply-To: <20210505163413.3461611-1-sashal@kernel.org>
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[ Upstream commit a122a116fc6d8fcf2f202dcd185173a54268f239 ]
Current rsnd needs to call .prepare (P) for clock settings,
.trigger for playback start (S) and stop (E).
It should be called as below from SSI point of view.
P -> S -> E -> P -> S -> E -> ...
But, if you used MIXer, below case might happen
(2)
1: P -> S ---> E -> ...
2: P ----> S -> ...
(1) (3)
P(1) setups clock, but E(2) resets it. and starts playback (3).
In such case, it will reports "SSI parent/child should use same rate".
rsnd_ssi_master_clk_start() which is the main function at (P)
was called from rsnd_ssi_init() (= S) before,
but was moved by below patch to rsnd_soc_dai_prepare() (= P) to avoid
using clk_get_rate() which shouldn't be used under atomic context.
commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set
under non-atomic")
Because of above patch, rsnd_ssi_master_clk_start() is now called at (P)
which is for non atomic context. But (P) is assuming that spin lock is
*not* used.
One issue now is rsnd_ssi_master_clk_start() is checking ssi->xxx
which should be protected by spin lock.
After above patch, adg.c had below patch for other reasons.
commit 06e8f5c842f2d ("ASoC: rsnd: don't call clk_get_rate()
under atomic context")
clk_get_rate() is used at probe() timing by this patch.
In other words, rsnd_ssi_master_clk_start() is no longer using
clk_get_rate() any more.
This means we can call it from rsnd_ssi_init() (= S) again which is
protected by spin lock.
This patch re-move it to under spin lock, and solves
1. checking ssi->xxx without spin lock issue.
2. clk setting / device start / device stop race condition.
Reported-by: Linh Phung T. Y. <linh.phung.jy@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875z0x1jt5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/sh/rcar/ssi.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index d0ded427a836..a2f8138d40c7 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -507,10 +507,15 @@ static int rsnd_ssi_init(struct rsnd_mod *mod,
struct rsnd_priv *priv)
{
struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod);
+ int ret;
if (!rsnd_ssi_is_run_mods(mod, io))
return 0;
+ ret = rsnd_ssi_master_clk_start(mod, io);
+ if (ret < 0)
+ return ret;
+
ssi->usrcnt++;
rsnd_mod_power_on(mod);
@@ -1060,13 +1065,6 @@ static int rsnd_ssi_pio_pointer(struct rsnd_mod *mod,
return 0;
}
-static int rsnd_ssi_prepare(struct rsnd_mod *mod,
- struct rsnd_dai_stream *io,
- struct rsnd_priv *priv)
-{
- return rsnd_ssi_master_clk_start(mod, io);
-}
-
static struct rsnd_mod_ops rsnd_ssi_pio_ops = {
.name = SSI_NAME,
.probe = rsnd_ssi_common_probe,
@@ -1079,7 +1077,6 @@ static struct rsnd_mod_ops rsnd_ssi_pio_ops = {
.pointer = rsnd_ssi_pio_pointer,
.pcm_new = rsnd_ssi_pcm_new,
.hw_params = rsnd_ssi_hw_params,
- .prepare = rsnd_ssi_prepare,
.get_status = rsnd_ssi_get_status,
};
@@ -1166,7 +1163,6 @@ static struct rsnd_mod_ops rsnd_ssi_dma_ops = {
.pcm_new = rsnd_ssi_pcm_new,
.fallback = rsnd_ssi_fallback,
.hw_params = rsnd_ssi_hw_params,
- .prepare = rsnd_ssi_prepare,
.get_status = rsnd_ssi_get_status,
};
--
2.30.2
next prev parent reply other threads:[~2021-05-05 16:42 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20210505163413.3461611-1-sashal@kernel.org>
2021-05-05 16:32 ` [PATCH AUTOSEL 5.11 002/104] ALSA: usb-audio: Add Pioneer DJM-850 to quirks-table Sasha Levin
2021-05-05 16:32 ` [PATCH AUTOSEL 5.11 012/104] ASoC: Intel: bytcr_rt5640: Enable jack-detect support on Asus T100TAF Sasha Levin
2021-05-05 16:32 ` [PATCH AUTOSEL 5.11 015/104] ASoC: rsnd: core: Check convert rate in rsnd_hw_params Sasha Levin
2021-05-05 16:32 ` [PATCH AUTOSEL 5.11 019/104] ALSA: hdsp: don't disable if not enabled Sasha Levin
2021-05-05 16:32 ` [PATCH AUTOSEL 5.11 020/104] ALSA: hdspm: " Sasha Levin
2021-05-05 16:32 ` [PATCH AUTOSEL 5.11 021/104] ALSA: rme9652: " Sasha Levin
2021-05-05 16:32 ` [PATCH AUTOSEL 5.11 022/104] ALSA: bebob: enable to deliver MIDI messages for multiple ports Sasha Levin
2021-05-05 16:33 ` [PATCH AUTOSEL 5.11 034/104] ASoC: Intel: bytcr_rt5640: Add quirk for the Chuwi Hi8 tablet Sasha Levin
2021-05-05 16:33 ` [PATCH AUTOSEL 5.11 039/104] ASoC: rt5670: Add a quirk for the Dell Venue 10 Pro 5055 Sasha Levin
2021-05-05 16:33 ` [PATCH AUTOSEL 5.11 048/104] ASoC: soc-compress: lock pcm_mutex to resolve lockdep error Sasha Levin
2021-05-05 16:33 ` Sasha Levin [this message]
2021-05-05 16:33 ` [PATCH AUTOSEL 5.11 071/104] ALSA: hda/realtek: Add quirk for Lenovo Ideapad S740 Sasha Levin
2021-05-05 16:33 ` [PATCH AUTOSEL 5.11 072/104] ASoC: Intel: sof_sdw: add quirk for new ADL-P Rvp Sasha Levin
2021-05-05 16:33 ` [PATCH AUTOSEL 5.11 073/104] ALSA: hda/hdmi: fix race in handling acomp ELD notification at resume Sasha Levin
2021-05-05 16:33 ` [PATCH AUTOSEL 5.11 080/104] ASoC: rt286: Generalize support for ALC3263 codec Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210505163413.3461611-65-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=linh.phung.jy@renesas.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox