From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: <broonie@kernel.org>
Cc: pierre-louis.bossart@linux.intel.com,
alsa-devel@alsa-project.org, patches@opensource.cirrus.com,
lgirdwood@gmail.com, james.schulman@cirrus.com,
david.rhodes@cirrus.com
Subject: [PATCH 10/10] ASoC: cs53l30: Minor error paths fixups
Date: Mon, 10 May 2021 14:13:57 +0100 [thread overview]
Message-ID: <20210510131357.17170-11-ckeepax@opensource.cirrus.com> (raw)
In-Reply-To: <20210510131357.17170-1-ckeepax@opensource.cirrus.com>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
sound/soc/codecs/cs53l30.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/sound/soc/codecs/cs53l30.c b/sound/soc/codecs/cs53l30.c
index 3d67cbf9eaaa2..bd33dd048c7ce 100644
--- a/sound/soc/codecs/cs53l30.c
+++ b/sound/soc/codecs/cs53l30.c
@@ -20,6 +20,7 @@
#include <sound/tlv.h>
#include "cs53l30.h"
+#include "cirrus_legacy.h"
#define CS53L30_NUM_SUPPLIES 2
static const char *const cs53l30_supply_names[CS53L30_NUM_SUPPLIES] = {
@@ -920,9 +921,8 @@ static int cs53l30_i2c_probe(struct i2c_client *client,
const struct device_node *np = client->dev.of_node;
struct device *dev = &client->dev;
struct cs53l30_private *cs53l30;
- unsigned int devid = 0;
unsigned int reg;
- int ret = 0, i;
+ int ret = 0, i, devid;
u8 val;
cs53l30 = devm_kzalloc(dev, sizeof(*cs53l30), GFP_KERNEL);
@@ -951,7 +951,7 @@ static int cs53l30_i2c_probe(struct i2c_client *client,
GPIOD_OUT_LOW);
if (IS_ERR(cs53l30->reset_gpio)) {
ret = PTR_ERR(cs53l30->reset_gpio);
- goto error;
+ goto error_supplies;
}
gpiod_set_value_cansleep(cs53l30->reset_gpio, 1);
@@ -968,14 +968,12 @@ static int cs53l30_i2c_probe(struct i2c_client *client,
}
/* Initialize codec */
- ret = regmap_read(cs53l30->regmap, CS53L30_DEVID_AB, ®);
- devid = reg << 12;
-
- ret = regmap_read(cs53l30->regmap, CS53L30_DEVID_CD, ®);
- devid |= reg << 4;
-
- ret = regmap_read(cs53l30->regmap, CS53L30_DEVID_E, ®);
- devid |= (reg & 0xF0) >> 4;
+ devid = cirrus_read_device_id(cs53l30->regmap, CS53L30_DEVID_AB);
+ if (devid < 0) {
+ ret = devid;
+ dev_err(dev, "Failed to read device ID: %d\n", ret);
+ goto error;
+ }
if (devid != CS53L30_DEVID) {
ret = -ENODEV;
@@ -1037,6 +1035,8 @@ static int cs53l30_i2c_probe(struct i2c_client *client,
return 0;
error:
+ gpiod_set_value_cansleep(cs53l30->reset_gpio, 0);
+error_supplies:
regulator_bulk_disable(ARRAY_SIZE(cs53l30->supplies),
cs53l30->supplies);
return ret;
--
2.11.0
next prev parent reply other threads:[~2021-05-10 13:17 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-10 13:13 [PATCH 00/10] Tidy up device ID reading on legacy Cirrus parts Charles Keepax
2021-05-10 13:13 ` [PATCH 01/10] ASoC: cirrus: Add helper function for reading the device ID Charles Keepax
2021-05-10 13:13 ` [PATCH 02/10] ASoC: cs35l32: Minor error paths fixups Charles Keepax
2021-05-10 13:13 ` [PATCH 03/10] ASoC: cs35l33: " Charles Keepax
2021-05-10 13:13 ` [PATCH 04/10] ASoC: cs35l34: " Charles Keepax
2021-05-10 13:13 ` [PATCH 05/10] ASoC: cs35l35: " Charles Keepax
2021-05-10 13:13 ` [PATCH 06/10] ASoC: cs35l35: Correct errata handling Charles Keepax
2021-05-10 13:13 ` [PATCH 07/10] ASoC: cs42l42: Minor error paths fixups Charles Keepax
2021-05-10 13:13 ` [PATCH 08/10] ASoC: cs42l73: " Charles Keepax
2021-05-10 13:13 ` [PATCH 09/10] ASoC: cs43130: " Charles Keepax
2021-05-10 13:13 ` Charles Keepax [this message]
2021-05-10 14:59 ` [PATCH 00/10] Tidy up device ID reading on legacy Cirrus parts Pierre-Louis Bossart
2021-05-11 9:12 ` Charles Keepax
2021-05-11 8:26 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210510131357.17170-11-ckeepax@opensource.cirrus.com \
--to=ckeepax@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=david.rhodes@cirrus.com \
--cc=james.schulman@cirrus.com \
--cc=lgirdwood@gmail.com \
--cc=patches@opensource.cirrus.com \
--cc=pierre-louis.bossart@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).