alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: <broonie@kernel.org>
Cc: pierre-louis.bossart@linux.intel.com,
	alsa-devel@alsa-project.org, patches@opensource.cirrus.com,
	lgirdwood@gmail.com, james.schulman@cirrus.com,
	david.rhodes@cirrus.com
Subject: [PATCH 02/10] ASoC: cs35l32: Minor error paths fixups
Date: Mon, 10 May 2021 14:13:49 +0100	[thread overview]
Message-ID: <20210510131357.17170-3-ckeepax@opensource.cirrus.com> (raw)
In-Reply-To: <20210510131357.17170-1-ckeepax@opensource.cirrus.com>

Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.

Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/cs35l32.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/sound/soc/codecs/cs35l32.c b/sound/soc/codecs/cs35l32.c
index f4067230ac425..7e1047362a901 100644
--- a/sound/soc/codecs/cs35l32.c
+++ b/sound/soc/codecs/cs35l32.c
@@ -30,6 +30,7 @@
 #include <dt-bindings/sound/cs35l32.h>
 
 #include "cs35l32.h"
+#include "cirrus_legacy.h"
 
 #define CS35L32_NUM_SUPPLIES 2
 static const char *const cs35l32_supply_names[CS35L32_NUM_SUPPLIES] = {
@@ -348,8 +349,7 @@ static int cs35l32_i2c_probe(struct i2c_client *i2c_client,
 	struct cs35l32_private *cs35l32;
 	struct cs35l32_platform_data *pdata =
 		dev_get_platdata(&i2c_client->dev);
-	int ret, i;
-	unsigned int devid = 0;
+	int ret, i, devid;
 	unsigned int reg;
 
 	cs35l32 = devm_kzalloc(&i2c_client->dev, sizeof(*cs35l32), GFP_KERNEL);
@@ -404,40 +404,40 @@ static int cs35l32_i2c_probe(struct i2c_client *i2c_client,
 	/* Reset the Device */
 	cs35l32->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev,
 		"reset", GPIOD_OUT_LOW);
-	if (IS_ERR(cs35l32->reset_gpio))
-		return PTR_ERR(cs35l32->reset_gpio);
+	if (IS_ERR(cs35l32->reset_gpio)) {
+		ret = PTR_ERR(cs35l32->reset_gpio);
+		goto err_supplies;
+	}
 
 	gpiod_set_value_cansleep(cs35l32->reset_gpio, 1);
 
 	/* initialize codec */
-	ret = regmap_read(cs35l32->regmap, CS35L32_DEVID_AB, &reg);
-	devid = (reg & 0xFF) << 12;
-
-	ret = regmap_read(cs35l32->regmap, CS35L32_DEVID_CD, &reg);
-	devid |= (reg & 0xFF) << 4;
-
-	ret = regmap_read(cs35l32->regmap, CS35L32_DEVID_E, &reg);
-	devid |= (reg & 0xF0) >> 4;
+	devid = cirrus_read_device_id(cs35l32->regmap, CS35L32_DEVID_AB);
+	if (devid < 0) {
+		ret = devid;
+		dev_err(&i2c_client->dev, "Failed to read device ID: %d\n", ret);
+		goto err_disable;
+	}
 
 	if (devid != CS35L32_CHIP_ID) {
 		ret = -ENODEV;
 		dev_err(&i2c_client->dev,
 			"CS35L32 Device ID (%X). Expected %X\n",
 			devid, CS35L32_CHIP_ID);
-		return ret;
+		goto err_disable;
 	}
 
 	ret = regmap_read(cs35l32->regmap, CS35L32_REV_ID, &reg);
 	if (ret < 0) {
 		dev_err(&i2c_client->dev, "Get Revision ID failed\n");
-		return ret;
+		goto err_disable;
 	}
 
 	ret = regmap_register_patch(cs35l32->regmap, cs35l32_monitor_patch,
 				    ARRAY_SIZE(cs35l32_monitor_patch));
 	if (ret < 0) {
 		dev_err(&i2c_client->dev, "Failed to apply errata patch\n");
-		return ret;
+		goto err_disable;
 	}
 
 	dev_info(&i2c_client->dev,
@@ -478,7 +478,7 @@ static int cs35l32_i2c_probe(struct i2c_client *i2c_client,
 			    CS35L32_PDN_AMP);
 
 	/* Clear MCLK Error Bit since we don't have the clock yet */
-	ret = regmap_read(cs35l32->regmap, CS35L32_INT_STATUS_1, &reg);
+	regmap_read(cs35l32->regmap, CS35L32_INT_STATUS_1, &reg);
 
 	ret = devm_snd_soc_register_component(&i2c_client->dev,
 			&soc_component_dev_cs35l32, cs35l32_dai,
@@ -489,6 +489,8 @@ static int cs35l32_i2c_probe(struct i2c_client *i2c_client,
 	return 0;
 
 err_disable:
+	gpiod_set_value_cansleep(cs35l32->reset_gpio, 0);
+err_supplies:
 	regulator_bulk_disable(ARRAY_SIZE(cs35l32->supplies),
 			       cs35l32->supplies);
 	return ret;
-- 
2.11.0


  parent reply	other threads:[~2021-05-10 13:16 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-10 13:13 [PATCH 00/10] Tidy up device ID reading on legacy Cirrus parts Charles Keepax
2021-05-10 13:13 ` [PATCH 01/10] ASoC: cirrus: Add helper function for reading the device ID Charles Keepax
2021-05-10 13:13 ` Charles Keepax [this message]
2021-05-10 13:13 ` [PATCH 03/10] ASoC: cs35l33: Minor error paths fixups Charles Keepax
2021-05-10 13:13 ` [PATCH 04/10] ASoC: cs35l34: " Charles Keepax
2021-05-10 13:13 ` [PATCH 05/10] ASoC: cs35l35: " Charles Keepax
2021-05-10 13:13 ` [PATCH 06/10] ASoC: cs35l35: Correct errata handling Charles Keepax
2021-05-10 13:13 ` [PATCH 07/10] ASoC: cs42l42: Minor error paths fixups Charles Keepax
2021-05-10 13:13 ` [PATCH 08/10] ASoC: cs42l73: " Charles Keepax
2021-05-10 13:13 ` [PATCH 09/10] ASoC: cs43130: " Charles Keepax
2021-05-10 13:13 ` [PATCH 10/10] ASoC: cs53l30: " Charles Keepax
2021-05-10 14:59 ` [PATCH 00/10] Tidy up device ID reading on legacy Cirrus parts Pierre-Louis Bossart
2021-05-11  9:12   ` Charles Keepax
2021-05-11  8:26 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210510131357.17170-3-ckeepax@opensource.cirrus.com \
    --to=ckeepax@opensource.cirrus.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=david.rhodes@cirrus.com \
    --cc=james.schulman@cirrus.com \
    --cc=lgirdwood@gmail.com \
    --cc=patches@opensource.cirrus.com \
    --cc=pierre-louis.bossart@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).