From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Randy Dunlap <rdunlap@infradead.org>,
alsa-devel@alsa-project.org, Mark Brown <broonie@kernel.org>,
Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.14 013/252] ASoC: atmel: ATMEL drivers don't need HAS_DMA
Date: Thu, 9 Sep 2021 07:37:07 -0400 [thread overview]
Message-ID: <20210909114106.141462-13-sashal@kernel.org> (raw)
In-Reply-To: <20210909114106.141462-1-sashal@kernel.org>
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 6c5c659dfe3f02e08054a6c20019e3886618b512 ]
On a config (such as arch/sh/) which does not set HAS_DMA when MMU
is not set, several ATMEL ASoC drivers select symbols that cause
kconfig warnings. There is one "depends on HAS_DMA" which is no longer
needed. Dropping it eliminates the kconfig warnings and still builds
with no problems reported.
Fix the following kconfig warnings:
WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_PDC
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && HAS_DMA [=n]
Selected by [m]:
- SND_ATMEL_SOC_SSC [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m]
- SND_ATMEL_SOC_SSC_PDC [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m]
WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC_PDC
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m] && HAS_DMA [=n]
Selected by [m]:
- SND_AT91_SOC_SAM9G20_WM8731 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && SND_SOC_I2C_AND_SPI [=m]
WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && HAS_DMA [=n]
Selected by [m]:
- SND_ATMEL_SOC_SSC_DMA [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m]
WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC_DMA
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m] && HAS_DMA [=n]
Selected by [m]:
- SND_ATMEL_SOC_WM8904 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && I2C [=m]
- SND_AT91_SOC_SAM9X5_WM8731 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && SND_SOC_I2C_AND_SPI [=m]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707214752.3831-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/atmel/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index ec04e3386bc0..8617793ed955 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -11,7 +11,6 @@ if SND_ATMEL_SOC
config SND_ATMEL_SOC_PDC
bool
- depends on HAS_DMA
config SND_ATMEL_SOC_DMA
bool
--
2.30.2
next prev parent reply other threads:[~2021-09-09 11:43 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20210909114106.141462-1-sashal@kernel.org>
2021-09-09 11:37 ` [PATCH AUTOSEL 5.14 012/252] ASoC: ti: davinci-mcasp: Fix DIT mode support Sasha Levin
2021-09-09 11:37 ` Sasha Levin [this message]
2021-09-09 11:38 ` [PATCH AUTOSEL 5.14 100/252] ASoC: Intel: bytcr_rt5640: Move "Platform Clock" routes to the maps for the matching in-/output Sasha Levin
2021-09-09 11:38 ` [PATCH AUTOSEL 5.14 102/252] ASoC: Intel: update sof_pcm512x quirks Sasha Levin
2021-09-09 11:39 ` [PATCH AUTOSEL 5.14 132/252] ALSA: pci: cs46xx: Fix set up buffer type properly Sasha Levin
2021-09-09 11:53 ` Takashi Iwai
2021-09-09 11:39 ` [PATCH AUTOSEL 5.14 166/252] ALSA: hda: Drop workaround for a hang at shutdown again Sasha Levin
2021-09-09 11:50 ` Takashi Iwai
2021-09-09 11:39 ` [PATCH AUTOSEL 5.14 179/252] ASoC: rsnd: adg: clearly handle clock error / NULL case Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 198/252] ASoC: intel: atom: Revert PCM buffer address setup workaround again Sasha Levin
2021-09-09 11:51 ` Takashi Iwai
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 199/252] soundwire: intel: fix potential race condition during power down Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 200/252] ASoC: Intel: Skylake: Fix module configuration for KPB and MIXER Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 201/252] ASoC: Intel: Skylake: Fix passing loadable flag for module Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 222/252] ASoC: rockchip: i2s: Fix regmap_ops hang Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 223/252] ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 224/252] ASoC: soc-pcm: protect BE dailink state changes in trigger Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210909114106.141462-13-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=codrin.ciubotariu@microchip.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rdunlap@infradead.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).