Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: <broonie@kernel.org>
Cc: patches@opensource.cirrus.com, alsa-devel@alsa-project.org,
	Richard Fitzgerald <rf@opensource.cirrus.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] ASoC: cs42l42: free_irq() before powering-down on probe() fail
Date: Tue, 26 Oct 2021 13:57:22 +0100	[thread overview]
Message-ID: <20211026125722.10220-3-rf@opensource.cirrus.com> (raw)
In-Reply-To: <20211026125722.10220-1-rf@opensource.cirrus.com>

Relying on devm to free the irq handler on probe failure leaves a
small window of opportunity for an interrupt to become pending and
then the handler to run after the chip has been reset and powered
off.

For safety cs42l42_probe() should free the irq in the error path.
As the irq is now disabled by the driver in probe() and remove()
there is no point allocating it as a devres-managed item, so
convert to plain non-devres.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
 sound/soc/codecs/cs42l42.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index dc12842ee6e1..1029f6b3eb48 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -2078,17 +2078,16 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
 
 	/* Request IRQ if one was specified */
 	if (i2c_client->irq) {
-		ret = devm_request_threaded_irq(&i2c_client->dev,
-						i2c_client->irq,
-						NULL, cs42l42_irq_thread,
-						IRQF_ONESHOT | IRQF_TRIGGER_LOW,
-						"cs42l42", cs42l42);
+		ret = request_threaded_irq(i2c_client->irq,
+					   NULL, cs42l42_irq_thread,
+					   IRQF_ONESHOT | IRQF_TRIGGER_LOW,
+					   "cs42l42", cs42l42);
 		if (ret == -EPROBE_DEFER) {
-			goto err_disable;
+			goto err_disable_noirq;
 		} else if (ret != 0) {
 			dev_err(&i2c_client->dev,
 				"Failed to request IRQ: %d\n", ret);
-			goto err_disable;
+			goto err_disable_noirq;
 		}
 	}
 
@@ -2158,6 +2157,10 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
 	regmap_write(cs42l42->regmap, CS42L42_PWR_CTL1, 0xff);
 
 err_disable:
+	if (i2c_client->irq)
+		free_irq(i2c_client->irq, cs42l42);
+
+err_disable_noirq:
 	gpiod_set_value_cansleep(cs42l42->reset_gpio, 0);
 err_disable_noreset:
 	regulator_bulk_disable(ARRAY_SIZE(cs42l42->supplies),
@@ -2170,7 +2173,7 @@ static int cs42l42_i2c_remove(struct i2c_client *i2c_client)
 	struct cs42l42_private *cs42l42 = i2c_get_clientdata(i2c_client);
 
 	if (i2c_client->irq)
-		devm_free_irq(&i2c_client->dev, i2c_client->irq, cs42l42);
+		free_irq(i2c_client->irq, cs42l42);
 
 	/*
 	 * The driver might not have control of reset and power supplies,
-- 
2.11.0


  parent reply	other threads:[~2021-10-26 12:59 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-26 12:57 [PATCH 0/2] ASoC: cs42l42: Fixes to power-down Richard Fitzgerald
2021-10-26 12:57 ` [PATCH 1/2] ASoC: cs42l42: Reset and power-down on remove() and failed probe() Richard Fitzgerald
2021-10-26 12:57 ` Richard Fitzgerald [this message]
2021-10-26 19:06 ` [PATCH 0/2] ASoC: cs42l42: Fixes to power-down Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211026125722.10220-3-rf@opensource.cirrus.com \
    --to=rf@opensource.cirrus.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox