From: Jack Yu <jack.yu@realtek.com>
To: <broonie@kernel.org>, <lgirdwood@gmail.com>
Cc: oder_chiou@realtek.com, Jack Yu <jack.yu@realtek.com>,
alsa-devel@alsa-project.org, lars@metafoo.de,
kent_chen@realtek.com, derek.fang@realtek.com,
shumingf@realtek.com, flove@realtek.com
Subject: [PATCH] ASoC: rt1011: revert 'I2S Reference' to SOC_ENUM_EXT
Date: Thu, 11 Nov 2021 17:17:05 +0800 [thread overview]
Message-ID: <20211111091705.20879-1-jack.yu@realtek.com> (raw)
Revert 'I2S Reference' to SOC_ENUM_EXT because the settings are specific
for some platforms, the default setting for 'I2S Reference' does nothing,
only some SoC platform need to configure it.
Previous 'I2S Reference' in SOC_ENUM format only toggles one bit of
RT1011_TDM1_SET_1 register, which isn't enough for specific platform.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
---
sound/soc/codecs/rt1011.c | 55 ++++++++++++++++++++++++++++++++++-----
sound/soc/codecs/rt1011.h | 7 +++++
2 files changed, 56 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c
index 297af7ff824c..b62301a6281f 100644
--- a/sound/soc/codecs/rt1011.c
+++ b/sound/soc/codecs/rt1011.c
@@ -1311,13 +1311,54 @@ static int rt1011_r0_load_info(struct snd_kcontrol *kcontrol,
.put = rt1011_r0_load_mode_put \
}
-static const char * const rt1011_i2s_ref_texts[] = {
- "Left Channel", "Right Channel"
+static const char * const rt1011_i2s_ref[] = {
+ "None", "Left Channel", "Right Channel"
};
-static SOC_ENUM_SINGLE_DECL(rt1011_i2s_ref_enum,
- RT1011_TDM1_SET_1, 7,
- rt1011_i2s_ref_texts);
+static SOC_ENUM_SINGLE_DECL(rt1011_i2s_ref_enum, 0, 0,
+ rt1011_i2s_ref);
+
+static int rt1011_i2s_ref_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct rt1011_priv *rt1011 =
+ snd_soc_component_get_drvdata(component);
+
+ rt1011->i2s_ref = ucontrol->value.enumerated.item[0];
+ switch (rt1011->i2s_ref) {
+ case RT1011_I2S_REF_LEFT_CH:
+ regmap_write(rt1011->regmap, RT1011_TDM_TOTAL_SET, 0x0240);
+ regmap_write(rt1011->regmap, RT1011_TDM1_SET_2, 0x8);
+ regmap_write(rt1011->regmap, RT1011_TDM1_SET_1, 0x1022);
+ regmap_write(rt1011->regmap, RT1011_ADCDAT_OUT_SOURCE, 0x4);
+ break;
+ case RT1011_I2S_REF_RIGHT_CH:
+ regmap_write(rt1011->regmap, RT1011_TDM_TOTAL_SET, 0x0240);
+ regmap_write(rt1011->regmap, RT1011_TDM1_SET_2, 0x8);
+ regmap_write(rt1011->regmap, RT1011_TDM1_SET_1, 0x10a2);
+ regmap_write(rt1011->regmap, RT1011_ADCDAT_OUT_SOURCE, 0x4);
+ break;
+ default:
+ dev_info(component->dev, "I2S Reference: Do nothing\n");
+ }
+
+ return 0;
+}
+
+static int rt1011_i2s_ref_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct rt1011_priv *rt1011 =
+ snd_soc_component_get_drvdata(component);
+
+ ucontrol->value.enumerated.item[0] = rt1011->i2s_ref;
+
+ return 0;
+}
static const struct snd_kcontrol_new rt1011_snd_controls[] = {
/* I2S Data In Selection */
@@ -1358,7 +1399,8 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = {
SOC_SINGLE("R0 Temperature", RT1011_STP_INITIAL_RESISTANCE_TEMP,
2, 255, 0),
/* I2S Reference */
- SOC_ENUM("I2S Reference", rt1011_i2s_ref_enum),
+ SOC_ENUM_EXT("I2S Reference", rt1011_i2s_ref_enum,
+ rt1011_i2s_ref_get, rt1011_i2s_ref_put),
};
static int rt1011_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source,
@@ -2017,6 +2059,7 @@ static int rt1011_probe(struct snd_soc_component *component)
schedule_work(&rt1011->cali_work);
+ rt1011->i2s_ref = 0;
rt1011->bq_drc_params = devm_kcalloc(component->dev,
RT1011_ADVMODE_NUM, sizeof(struct rt1011_bq_drc_params *),
GFP_KERNEL);
diff --git a/sound/soc/codecs/rt1011.h b/sound/soc/codecs/rt1011.h
index 68fadc15fa8c..4d6e7492d99c 100644
--- a/sound/soc/codecs/rt1011.h
+++ b/sound/soc/codecs/rt1011.h
@@ -654,6 +654,12 @@ enum {
RT1011_AIFS
};
+enum {
+ RT1011_I2S_REF_NONE,
+ RT1011_I2S_REF_LEFT_CH,
+ RT1011_I2S_REF_RIGHT_CH,
+};
+
/* BiQual & DRC related settings */
#define RT1011_BQ_DRC_NUM 128
struct rt1011_bq_drc_params {
@@ -692,6 +698,7 @@ struct rt1011_priv {
unsigned int r0_reg, cali_done;
unsigned int r0_calib, temperature_calib;
int recv_spk_mode;
+ int i2s_ref;
};
#endif /* end of _RT1011_H_ */
--
2.33.0
next reply other threads:[~2021-11-11 9:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-11 9:17 Jack Yu [this message]
2021-11-12 21:27 ` [PATCH] ASoC: rt1011: revert 'I2S Reference' to SOC_ENUM_EXT Mark Brown
2021-11-30 11:24 ` Péter Ujfalusi
2021-12-01 2:36 ` Jack Yu
2021-12-01 7:00 ` Péter Ujfalusi
2021-12-01 12:30 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211111091705.20879-1-jack.yu@realtek.com \
--to=jack.yu@realtek.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=derek.fang@realtek.com \
--cc=flove@realtek.com \
--cc=kent_chen@realtek.com \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=oder_chiou@realtek.com \
--cc=shumingf@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox