From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: <broonie@kernel.org>
Cc: patches@opensource.cirrus.com, alsa-devel@alsa-project.org,
lgirdwood@gmail.com
Subject: [PATCH 04/10] firmware: cs_dsp: Add pre_run callback
Date: Tue, 16 Nov 2021 16:16:03 +0000 [thread overview]
Message-ID: <20211116161609.12223-4-ckeepax@opensource.cirrus.com> (raw)
In-Reply-To: <20211116161609.12223-1-ckeepax@opensource.cirrus.com>
The code already has a post_run callback, add a matching pre_run
callback to the client_ops that is called before execution is started.
This callback provides a convenient place for the client code to
set DSP controls or hardware that requires configuration before
the DSP core actually starts execution. Note that placing this callback
before cs_dsp_coeff_sync_controls is important to ensure that any
control values are then correctly synced out to the chip.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
---
drivers/firmware/cirrus/cs_dsp.c | 6 ++++++
include/linux/firmware/cirrus/cs_dsp.h | 4 +++-
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/firmware/cirrus/cs_dsp.c b/drivers/firmware/cirrus/cs_dsp.c
index 0da454a8498d0..ef7afadea42d1 100644
--- a/drivers/firmware/cirrus/cs_dsp.c
+++ b/drivers/firmware/cirrus/cs_dsp.c
@@ -2627,6 +2627,12 @@ int cs_dsp_run(struct cs_dsp *dsp)
goto err;
}
+ if (dsp->client_ops->pre_run) {
+ ret = dsp->client_ops->pre_run(dsp);
+ if (ret)
+ goto err;
+ }
+
/* Sync set controls */
ret = cs_dsp_coeff_sync_controls(dsp);
if (ret != 0)
diff --git a/include/linux/firmware/cirrus/cs_dsp.h b/include/linux/firmware/cirrus/cs_dsp.h
index ce54705e2becf..0bf849baeaa5a 100644
--- a/include/linux/firmware/cirrus/cs_dsp.h
+++ b/include/linux/firmware/cirrus/cs_dsp.h
@@ -187,7 +187,8 @@ struct cs_dsp {
* struct cs_dsp_client_ops - client callbacks
* @control_add: Called under the pwr_lock when a control is created
* @control_remove: Called under the pwr_lock when a control is destroyed
- * @post_run: Called under the pwr_lock by cs_dsp_run()
+ * @pre_run: Called under the pwr_lock by cs_dsp_run() before the core is started
+ * @post_run: Called under the pwr_lock by cs_dsp_run() after the core is started
* @post_stop: Called under the pwr_lock by cs_dsp_stop()
* @watchdog_expired: Called when a watchdog expiry is detected
*
@@ -197,6 +198,7 @@ struct cs_dsp {
struct cs_dsp_client_ops {
int (*control_add)(struct cs_dsp_coeff_ctl *ctl);
void (*control_remove)(struct cs_dsp_coeff_ctl *ctl);
+ int (*pre_run)(struct cs_dsp *dsp);
int (*post_run)(struct cs_dsp *dsp);
void (*post_stop)(struct cs_dsp *dsp);
void (*watchdog_expired)(struct cs_dsp *dsp);
--
2.11.0
next prev parent reply other threads:[~2021-11-16 16:18 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-16 16:16 [PATCH 01/10] ASoC: wm_adsp: Remove the wmfw_add_ctl helper function Charles Keepax
2021-11-16 16:16 ` [PATCH 02/10] firmware: cs_dsp: Add lockdep asserts to interface functions Charles Keepax
2021-11-16 16:16 ` [PATCH 03/10] firmware: cs_dsp: Add version checks on coefficient loading Charles Keepax
2021-11-16 18:08 ` Mark Brown
2021-11-16 18:44 ` Simon Trimmer
2021-11-17 11:00 ` Charles Keepax
2021-11-17 12:54 ` Mark Brown
2021-11-16 16:16 ` Charles Keepax [this message]
2021-11-16 16:16 ` [PATCH 05/10] firmware: cs_dsp: Print messages from bin files Charles Keepax
2021-11-16 16:16 ` [PATCH 06/10] firmware: cs_dsp: Add support for rev 2 coefficient files Charles Keepax
2021-11-16 16:16 ` [PATCH 07/10] firmware: cs_dsp: Perform NULL check in cs_dsp_coeff_write/read_ctrl Charles Keepax
2021-11-16 16:16 ` [PATCH 08/10] firmware: cs_dsp: Clarify some kernel doc comments Charles Keepax
2021-11-16 16:16 ` [PATCH 09/10] firmware: cs_dsp: Add offset to cs_dsp read/write Charles Keepax
2021-11-16 16:16 ` [PATCH 10/10] firmware: cs_dsp: Allow creation of event controls Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211116161609.12223-4-ckeepax@opensource.cirrus.com \
--to=ckeepax@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=patches@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox