[PATCH] ASoC: dt-bindings: realtek, rt5682s: Drop Tegra specifics from example

[Rob Herring <robh@kernel.org>]

There's no need to complicate examples with a platform specific macro.
It also complicates example parsing to figure out the number of interrupt
cells in examples (based on bracketing).

Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/sound/realtek,rt5682s.yaml        | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
index d65c0ed5060c..ca5b8987b749 100644
--- a/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
+++ b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
@@ -21,6 +21,7 @@ properties:
     description: I2C address of the device.
 
   interrupts:
+    maxItems: 1
     description: The CODEC's interrupt output.
 
   realtek,dmic1-data-pin:
@@ -94,7 +95,7 @@ required:
 
 examples:
   - |
-    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c {
@@ -104,10 +105,9 @@ examples:
         codec@1a {
             compatible = "realtek,rt5682s";
             reg = <0x1a>;
-            interrupt-parent = <&gpio>;
-            interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
+            interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
             realtek,ldo1-en-gpios =
-                <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+                <&gpio 2 GPIO_ACTIVE_HIGH>;
             realtek,dmic1-data-pin = <1>;
             realtek,dmic1-clk-pin = <1>;
             realtek,jd-src = <1>;
-- 
2.32.0