[PATCH] ALSA: n64: Use platform_get_irq() to get the interrupt

[Zhen Ni <nizhen@uniontech.com>]

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Zhen Ni <nizhen@uniontech.com>
---
 sound/mips/snd-n64.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/mips/snd-n64.c b/sound/mips/snd-n64.c
index 463a6fe589eb..19365aab15ba 100644
--- a/sound/mips/snd-n64.c
+++ b/sound/mips/snd-n64.c
@@ -289,7 +289,7 @@ static int __init n64audio_probe(struct platform_device *pdev)
 	struct snd_card *card;
 	struct snd_pcm *pcm;
 	struct n64audio *priv;
-	struct resource *res;
+	int irq;
 	int err;
 
 	err = snd_card_new(&pdev->dev, SNDRV_DEFAULT_IDX1,
@@ -337,12 +337,12 @@ static int __init n64audio_probe(struct platform_device *pdev)
 	strcpy(card->shortname, "N64 Audio");
 	strcpy(card->longname, "N64 Audio");
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res) {
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
 		err = -EINVAL;
 		goto fail_dma_alloc;
 	}
-	if (devm_request_irq(&pdev->dev, res->start, n64audio_isr,
+	if (devm_request_irq(&pdev->dev, irq, n64audio_isr,
 				IRQF_SHARED, "N64 Audio", priv)) {
 		err = -EBUSY;
 		goto fail_dma_alloc;
-- 
2.20.1