Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mohan Kumar <mkumard@nvidia.com>
To: <tiwai@suse.com>, <perex@perex.cz>
Cc: alsa-devel@alsa-project.org, spujar@nvidia.com,
	linux-kernel@vger.kernel.org, jonathanh@nvidia.com,
	thierry.reding@gmail.com, linux-tegra@vger.kernel.org,
	Mohan Kumar <mkumard@nvidia.com>
Subject: [PATCH 1/2] ALSA: hda: Jack detection poll in suspend state
Date: Mon, 11 Apr 2022 13:02:09 +0530	[thread overview]
Message-ID: <20220411073210.23445-2-mkumard@nvidia.com> (raw)
In-Reply-To: <20220411073210.23445-1-mkumard@nvidia.com>

HDA Jack detection logic doesn't work when the HDACODEC
in runtime suspended state as unsol event won't be triggered
during D3 state. As pulseaudio server in userspace rely on the
jack mixer control status to show the audio devices in gui and
any display sink device hotplug event during D3 state will never
updates the jack status which will result in no audio device option
available in userspace settings.

The possible option available to resolve this issue is to run Jack
polling worker thread even after codec suspend state. The choice can
be made based on compromise between power saving or Jack detection in
suspend state.

Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
---
 include/sound/hda_codec.h |  3 +++
 sound/pci/hda/hda_codec.c | 11 ++++++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/include/sound/hda_codec.h b/include/sound/hda_codec.h
index 77426ff58338..b7be300b6b18 100644
--- a/include/sound/hda_codec.h
+++ b/include/sound/hda_codec.h
@@ -59,6 +59,9 @@ struct hda_bus {
 	unsigned int no_response_fallback:1; /* don't fallback at RIRB error */
 	unsigned int bus_probing :1;	/* during probing process */
 	unsigned int keep_power:1;	/* keep power up for notification */
+	unsigned int jackpoll_in_suspend:1; /* keep jack polling during
+					     * runtime suspend
+					     */
 
 	int primary_dig_out_type;	/* primary digital out PCM type */
 	unsigned int mixer_assigned;	/* codec addr for mixer name */
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 5cbac315dbe1..7579a6982f47 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -2935,7 +2935,9 @@ static int hda_codec_runtime_suspend(struct device *dev)
 	if (!codec->card)
 		return 0;
 
-	cancel_delayed_work_sync(&codec->jackpoll_work);
+	if (!codec->bus->jackpoll_in_suspend)
+		cancel_delayed_work_sync(&codec->jackpoll_work);
+
 	state = hda_call_codec_suspend(codec);
 	if (codec->link_down_at_suspend ||
 	    (codec_has_clkstop(codec) && codec_has_epss(codec) &&
@@ -2984,6 +2986,9 @@ static void hda_codec_pm_complete(struct device *dev)
 
 static int hda_codec_pm_suspend(struct device *dev)
 {
+	struct hda_codec *codec = dev_to_hda_codec(dev);
+
+	cancel_delayed_work_sync(&codec->jackpoll_work);
 	dev->power.power_state = PMSG_SUSPEND;
 	return pm_runtime_force_suspend(dev);
 }
@@ -2996,6 +3001,9 @@ static int hda_codec_pm_resume(struct device *dev)
 
 static int hda_codec_pm_freeze(struct device *dev)
 {
+	struct hda_codec *codec = dev_to_hda_codec(dev);
+
+	cancel_delayed_work_sync(&codec->jackpoll_work);
 	dev->power.power_state = PMSG_FREEZE;
 	return pm_runtime_force_suspend(dev);
 }
@@ -3038,6 +3046,7 @@ void snd_hda_codec_shutdown(struct hda_codec *codec)
 	if (!codec->registered)
 		return;
 
+	cancel_delayed_work_sync(&codec->jackpoll_work);
 	list_for_each_entry(cpcm, &codec->pcm_list_head, list)
 		snd_pcm_suspend_all(cpcm->pcm);
 
-- 
2.17.1


  reply	other threads:[~2022-04-11  7:33 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-11  7:32 [PATCH 0/2] Add support for HDA Jack poll in suspend state Mohan Kumar
2022-04-11  7:32 ` Mohan Kumar [this message]
2022-04-11  7:32 ` [PATCH 2/2] ALSA: hda/tegra: Enable Jack poll for tegra Mohan Kumar
2022-04-12  9:40 ` [PATCH 0/2] Add support for HDA Jack poll in suspend state Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220411073210.23445-2-mkumard@nvidia.com \
    --to=mkumard@nvidia.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=spujar@nvidia.com \
    --cc=thierry.reding@gmail.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox