From: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
To: <broonie@kernel.org>, <alsa-devel@alsa-project.org>
Cc: Sunil-kumar.Dommati@amd.com,
Geert Uytterhoeven <geert+renesas@glider.be>,
Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>,
open list <linux-kernel@vger.kernel.org>,
Basavaraj.Hiregoudar@amd.com, Takashi Iwai <tiwai@suse.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Jia-Ju Bai <baijiaju1990@gmail.com>,
Arnd Bergmann <arnd@arndb.de>,
Akihiko Odaki <akihiko.odaki@gmail.com>,
Vijendar.Mukunda@amd.com,
V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Subject: [PATCH v2 2/2] Revert "ASoC: amd: acp: Power on/off the speaker enable gpio pin based on DAPM callback."
Date: Mon, 16 May 2022 21:36:10 +0530 [thread overview]
Message-ID: <20220516160619.17832-2-Vsujithkumar.Reddy@amd.com> (raw)
In-Reply-To: <20220516160619.17832-1-Vsujithkumar.Reddy@amd.com>
ASoC: amd : acp : Set Speaker enable/disable pin through rt1019 codec driver.
RT1019 codec has two ways of controlling the en_spkr.
one way is controlling through gpio pin method the another way is through codec register update through driver.
Now Speaker enable/disable is controlled through codec register updated by codec driver.
This patch reverts gpio logic.
This reverts commit 5c5f08f7fc0bee9a1bc3fbdcb7a21cfd0648ab14.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
---
sound/soc/amd/acp/Kconfig | 6 +++---
sound/soc/amd/acp/acp-legacy-mach.c | 21 +++------------------
sound/soc/amd/acp/acp-mach-common.c | 25 -------------------------
sound/soc/amd/acp/acp-mach.h | 10 +---------
sound/soc/amd/acp/acp-sof-mach.c | 21 +++------------------
5 files changed, 10 insertions(+), 73 deletions(-)
diff --git a/sound/soc/amd/acp/Kconfig b/sound/soc/amd/acp/Kconfig
index 626e4a5cb06a..9dae2719084c 100644
--- a/sound/soc/amd/acp/Kconfig
+++ b/sound/soc/amd/acp/Kconfig
@@ -42,7 +42,7 @@ config SND_AMD_ASOC_RENOIR
config SND_SOC_AMD_MACH_COMMON
tristate
- depends on X86 && PCI && I2C && GPIOLIB
+ depends on X86 && PCI && I2C
select CLK_FIXED_FCH
select SND_SOC_RT5682_I2C
select SND_SOC_DMIC
@@ -54,14 +54,14 @@ config SND_SOC_AMD_MACH_COMMON
config SND_SOC_AMD_LEGACY_MACH
tristate "AMD Legacy Machine Driver Support"
- depends on X86 && PCI && I2C && GPIOLIB
+ depends on X86 && PCI && I2C
select SND_SOC_AMD_MACH_COMMON
help
This option enables legacy sound card support for ACP audio.
config SND_SOC_AMD_SOF_MACH
tristate "AMD SOF Machine Driver Support"
- depends on X86 && PCI && I2C && GPIOLIB
+ depends on X86 && PCI && I2C
select SND_SOC_AMD_MACH_COMMON
help
This option enables SOF sound card support for ACP audio.
diff --git a/sound/soc/amd/acp/acp-legacy-mach.c b/sound/soc/amd/acp/acp-legacy-mach.c
index 442d5644e0f3..7f04a048ca3a 100644
--- a/sound/soc/amd/acp/acp-legacy-mach.c
+++ b/sound/soc/amd/acp/acp-legacy-mach.c
@@ -27,7 +27,6 @@ static struct acp_card_drvdata rt5682_rt1019_data = {
.hs_codec_id = RT5682,
.amp_codec_id = RT1019,
.dmic_codec_id = DMIC,
- .gpio_spkr_en = EN_SPKR_GPIO_GB,
};
static struct acp_card_drvdata rt5682s_max_data = {
@@ -37,7 +36,6 @@ static struct acp_card_drvdata rt5682s_max_data = {
.hs_codec_id = RT5682S,
.amp_codec_id = MAX98360A,
.dmic_codec_id = DMIC,
- .gpio_spkr_en = EN_SPKR_GPIO_NONE,
};
static struct acp_card_drvdata rt5682s_rt1019_data = {
@@ -47,7 +45,6 @@ static struct acp_card_drvdata rt5682s_rt1019_data = {
.hs_codec_id = RT5682S,
.amp_codec_id = RT1019,
.dmic_codec_id = DMIC,
- .gpio_spkr_en = EN_SPKR_GPIO_NONE,
};
static const struct snd_kcontrol_new acp_controls[] = {
@@ -62,16 +59,15 @@ static const struct snd_kcontrol_new acp_controls[] = {
static const struct snd_soc_dapm_widget acp_widgets[] = {
SND_SOC_DAPM_HP("Headphone Jack", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
- SND_SOC_DAPM_SPK("Spk", event_spkr_handler),
- SND_SOC_DAPM_SPK("Left Spk", event_spkr_handler),
- SND_SOC_DAPM_SPK("Right Spk", event_spkr_handler),
+ SND_SOC_DAPM_SPK("Spk", NULL),
+ SND_SOC_DAPM_SPK("Left Spk", NULL),
+ SND_SOC_DAPM_SPK("Right Spk", NULL),
};
static int acp_asoc_probe(struct platform_device *pdev)
{
struct snd_soc_card *card = NULL;
struct device *dev = &pdev->dev;
- unsigned int spkr_gpio;
int ret;
if (!pdev->id_entry)
@@ -89,20 +85,9 @@ static int acp_asoc_probe(struct platform_device *pdev)
card->controls = acp_controls;
card->num_controls = ARRAY_SIZE(acp_controls);
card->drvdata = (struct acp_card_drvdata *)pdev->id_entry->driver_data;
- spkr_gpio = ((struct acp_card_drvdata *)(card->drvdata))->gpio_spkr_en;
acp_legacy_dai_links_create(card);
- if (gpio_is_valid(spkr_gpio)) {
- ret = devm_gpio_request(dev, spkr_gpio, "spkren");
- if (ret) {
- dev_err(dev, "(%s) gpio request failed: %d\n",
- __func__, ret);
- return ret;
- }
- gpio_direction_output(spkr_gpio, 0);
- }
-
ret = devm_snd_soc_register_card(&pdev->dev, card);
if (ret) {
dev_err(&pdev->dev,
diff --git a/sound/soc/amd/acp/acp-mach-common.c b/sound/soc/amd/acp/acp-mach-common.c
index 51adb8f3f83e..6ae454bf60af 100644
--- a/sound/soc/amd/acp/acp-mach-common.c
+++ b/sound/soc/amd/acp/acp-mach-common.c
@@ -71,31 +71,6 @@ static const struct snd_soc_dapm_route rt5682_map[] = {
{ "IN1P", NULL, "Headset Mic" },
};
-int event_spkr_handler(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *k, int event)
-{
- struct snd_soc_dapm_context *dapm = w->dapm;
- struct snd_soc_card *card = dapm->card;
- struct acp_card_drvdata *drvdata = snd_soc_card_get_drvdata(card);
-
- if (!gpio_is_valid(drvdata->gpio_spkr_en))
- return 0;
-
- switch (event) {
- case SND_SOC_DAPM_POST_PMU:
- gpio_set_value(drvdata->gpio_spkr_en, 1);
- break;
- case SND_SOC_DAPM_PRE_PMD:
- gpio_set_value(drvdata->gpio_spkr_en, 0);
- break;
- default:
- dev_warn(card->dev, "%s invalid setting\n", __func__);
- break;
- }
- return 0;
-}
-EXPORT_SYMBOL_NS_GPL(event_spkr_handler, SND_SOC_AMD_MACH);
-
/* Define card ops for RT5682 CODEC */
static int acp_card_rt5682_init(struct snd_soc_pcm_runtime *rtd)
{
diff --git a/sound/soc/amd/acp/acp-mach.h b/sound/soc/amd/acp/acp-mach.h
index fd6299844ebe..5dc47cfbff10 100644
--- a/sound/soc/amd/acp/acp-mach.h
+++ b/sound/soc/amd/acp/acp-mach.h
@@ -17,12 +17,6 @@
#include <linux/input.h>
#include <linux/module.h>
#include <sound/soc.h>
-#include <linux/gpio.h>
-#include <linux/gpio/consumer.h>
-
-#define EN_SPKR_GPIO_GB 0x11F
-#define EN_SPKR_GPIO_NK 0x146
-#define EN_SPKR_GPIO_NONE -EINVAL
enum be_id {
HEADSET_BE_ID = 0,
@@ -55,11 +49,9 @@ struct acp_card_drvdata {
unsigned int dai_fmt;
struct clk *wclk;
struct clk *bclk;
- unsigned int gpio_spkr_en;
};
int acp_sofdsp_dai_links_create(struct snd_soc_card *card);
int acp_legacy_dai_links_create(struct snd_soc_card *card);
-int event_spkr_handler(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *k, int event);
+
#endif
diff --git a/sound/soc/amd/acp/acp-sof-mach.c b/sound/soc/amd/acp/acp-sof-mach.c
index 8243765d490f..d1531cdab110 100644
--- a/sound/soc/amd/acp/acp-sof-mach.c
+++ b/sound/soc/amd/acp/acp-sof-mach.c
@@ -27,7 +27,6 @@ static struct acp_card_drvdata sof_rt5682_rt1019_data = {
.hs_codec_id = RT5682,
.amp_codec_id = RT1019,
.dmic_codec_id = DMIC,
- .gpio_spkr_en = EN_SPKR_GPIO_GB,
};
static struct acp_card_drvdata sof_rt5682_max_data = {
@@ -37,7 +36,6 @@ static struct acp_card_drvdata sof_rt5682_max_data = {
.hs_codec_id = RT5682,
.amp_codec_id = MAX98360A,
.dmic_codec_id = DMIC,
- .gpio_spkr_en = EN_SPKR_GPIO_NK,
};
static struct acp_card_drvdata sof_rt5682s_rt1019_data = {
@@ -56,7 +54,6 @@ static struct acp_card_drvdata sof_rt5682s_max_data = {
.hs_codec_id = RT5682S,
.amp_codec_id = MAX98360A,
.dmic_codec_id = DMIC,
- .gpio_spkr_en = EN_SPKR_GPIO_NK,
};
static const struct snd_kcontrol_new acp_controls[] = {
@@ -70,16 +67,15 @@ static const struct snd_kcontrol_new acp_controls[] = {
static const struct snd_soc_dapm_widget acp_widgets[] = {
SND_SOC_DAPM_HP("Headphone Jack", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
- SND_SOC_DAPM_SPK("Spk", event_spkr_handler),
- SND_SOC_DAPM_SPK("Left Spk", event_spkr_handler),
- SND_SOC_DAPM_SPK("Right Spk", event_spkr_handler),
+ SND_SOC_DAPM_SPK("Spk", NULL),
+ SND_SOC_DAPM_SPK("Left Spk", NULL),
+ SND_SOC_DAPM_SPK("Right Spk", NULL),
};
static int acp_sof_probe(struct platform_device *pdev)
{
struct snd_soc_card *card = NULL;
struct device *dev = &pdev->dev;
- unsigned int spkr_gpio;
int ret;
if (!pdev->id_entry)
@@ -97,20 +93,9 @@ static int acp_sof_probe(struct platform_device *pdev)
card->controls = acp_controls;
card->num_controls = ARRAY_SIZE(acp_controls);
card->drvdata = (struct acp_card_drvdata *)pdev->id_entry->driver_data;
- spkr_gpio = ((struct acp_card_drvdata *)(card->drvdata))->gpio_spkr_en;
acp_sofdsp_dai_links_create(card);
- if (gpio_is_valid(spkr_gpio)) {
- ret = devm_gpio_request(dev, spkr_gpio, "spkren");
- if (ret) {
- dev_err(dev, "(%s) gpio request failed: %d\n",
- __func__, ret);
- return ret;
- }
- gpio_direction_output(spkr_gpio, 0);
- }
-
ret = devm_snd_soc_register_card(&pdev->dev, card);
if (ret) {
dev_err(&pdev->dev,
--
2.25.1
next prev parent reply other threads:[~2022-05-16 16:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-16 16:06 [PATCH v2 1/2] Revert "ASoC: amd: acp: Set gpio_spkr_en to None for max speaker amplifer in machine driver" V sujith kumar Reddy
2022-05-16 16:06 ` V sujith kumar Reddy [this message]
2022-05-20 11:18 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220516160619.17832-2-Vsujithkumar.Reddy@amd.com \
--to=vsujithkumar.reddy@amd.com \
--cc=AjitKumar.Pandey@amd.com \
--cc=Basavaraj.Hiregoudar@amd.com \
--cc=Sunil-kumar.Dommati@amd.com \
--cc=Vijendar.Mukunda@amd.com \
--cc=akihiko.odaki@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=arnd@arndb.de \
--cc=baijiaju1990@gmail.com \
--cc=broonie@kernel.org \
--cc=geert+renesas@glider.be \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).