Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
To: lgirdwood@gmail.com, broonie@kernel.org,
	pierre-louis.bossart@linux.intel.com
Cc: alsa-devel@alsa-project.org, yung-chuan.liao@linux.intel.com,
	ranjani.sridharan@linux.intel.com, kai.vehmanen@linux.intel.com
Subject: [PATCH 5/6] ASoC: SOF: Intel: Switch to use the generic pm_ops.set_core_state
Date: Fri, 10 Jun 2022 11:35:48 +0300	[thread overview]
Message-ID: <20220610083549.16773-6-peter.ujfalusi@linux.intel.com> (raw)
In-Reply-To: <20220610083549.16773-1-peter.ujfalusi@linux.intel.com>

Instead of craft and send an IPC(3) message in hda_dsp_core_get(),
tgl_dsp_core_get() and tgl_dsp_core_put(), use the generic ops for handling
the IPC dependent implementation of core power on/off.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 sound/soc/sof/intel/hda-dsp.c | 15 ++++++---------
 sound/soc/sof/intel/tgl.c     | 30 ++++++++++--------------------
 2 files changed, 16 insertions(+), 29 deletions(-)

diff --git a/sound/soc/sof/intel/hda-dsp.c b/sound/soc/sof/intel/hda-dsp.c
index e24eea725acb..263ad455e283 100644
--- a/sound/soc/sof/intel/hda-dsp.c
+++ b/sound/soc/sof/intel/hda-dsp.c
@@ -940,13 +940,7 @@ void hda_dsp_d0i3_work(struct work_struct *work)
 
 int hda_dsp_core_get(struct snd_sof_dev *sdev, int core)
 {
-	struct sof_ipc_pm_core_config pm_core_config = {
-		.hdr = {
-			.cmd = SOF_IPC_GLB_PM_MSG | SOF_IPC_PM_CORE_ENABLE,
-			.size = sizeof(pm_core_config),
-		},
-		.enable_mask = sdev->enabled_cores_mask | BIT(core),
-	};
+	const struct sof_ipc_pm_ops *pm_ops = sdev->ipc->ops->pm;
 	int ret, ret1;
 
 	/* power up core */
@@ -961,9 +955,12 @@ int hda_dsp_core_get(struct snd_sof_dev *sdev, int core)
 	if (sdev->fw_state != SOF_FW_BOOT_COMPLETE || core == SOF_DSP_PRIMARY_CORE)
 		return 0;
 
+	/* No need to continue the set_core_state ops is not available */
+	if (!pm_ops->set_core_state)
+		return 0;
+
 	/* Now notify DSP for secondary cores */
-	ret = sof_ipc_tx_message(sdev->ipc, &pm_core_config, sizeof(pm_core_config),
-				 &pm_core_config, sizeof(pm_core_config));
+	ret = pm_ops->set_core_state(sdev, core, true);
 	if (ret < 0) {
 		dev_err(sdev->dev, "failed to enable secondary core '%d' failed with %d\n",
 			core, ret);
diff --git a/sound/soc/sof/intel/tgl.c b/sound/soc/sof/intel/tgl.c
index 1ddc492f1b13..dcad7c382de6 100644
--- a/sound/soc/sof/intel/tgl.c
+++ b/sound/soc/sof/intel/tgl.c
@@ -24,40 +24,30 @@ static const struct snd_sof_debugfs_map tgl_dsp_debugfs[] = {
 
 static int tgl_dsp_core_get(struct snd_sof_dev *sdev, int core)
 {
-	struct sof_ipc_pm_core_config pm_core_config = {
-		.hdr = {
-			.cmd = SOF_IPC_GLB_PM_MSG | SOF_IPC_PM_CORE_ENABLE,
-			.size = sizeof(pm_core_config),
-		},
-		.enable_mask = sdev->enabled_cores_mask | BIT(core),
-	};
+	const struct sof_ipc_pm_ops *pm_ops = sdev->ipc->ops->pm;
 
 	/* power up primary core if not already powered up and return */
 	if (core == SOF_DSP_PRIMARY_CORE)
 		return hda_dsp_enable_core(sdev, BIT(core));
 
-	/* notify DSP for secondary cores */
-	return sof_ipc_tx_message(sdev->ipc, &pm_core_config, sizeof(pm_core_config),
-				 &pm_core_config, sizeof(pm_core_config));
+	if (pm_ops->set_core_state)
+		return pm_ops->set_core_state(sdev, core, true);
+
+	return 0;
 }
 
 static int tgl_dsp_core_put(struct snd_sof_dev *sdev, int core)
 {
-	struct sof_ipc_pm_core_config pm_core_config = {
-		.hdr = {
-			.cmd = SOF_IPC_GLB_PM_MSG | SOF_IPC_PM_CORE_ENABLE,
-			.size = sizeof(pm_core_config),
-		},
-		.enable_mask = sdev->enabled_cores_mask & ~BIT(core),
-	};
+	const struct sof_ipc_pm_ops *pm_ops = sdev->ipc->ops->pm;
 
 	/* power down primary core and return */
 	if (core == SOF_DSP_PRIMARY_CORE)
 		return hda_dsp_core_reset_power_down(sdev, BIT(core));
 
-	/* notify DSP for secondary cores */
-	return sof_ipc_tx_message(sdev->ipc, &pm_core_config, sizeof(pm_core_config),
-				 &pm_core_config, sizeof(pm_core_config));
+	if (pm_ops->set_core_state)
+		return pm_ops->set_core_state(sdev, core, false);
+
+	return 0;
 }
 
 /* Tigerlake ops */
-- 
2.36.1


  parent reply	other threads:[~2022-06-10  8:38 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-10  8:35 [PATCH 0/6] ASoC: SOF: Add support ctx_save with IPC4 Peter Ujfalusi
2022-06-10  8:35 ` [PATCH 1/6] ASoC: SOF: make ctx_store and ctx_restore as optional Peter Ujfalusi
2022-06-10  8:35 ` [PATCH 2/6] ASoC: SOF: sof_ipc_pm_ops: Add support for DSP core power management Peter Ujfalusi
2022-06-10  8:35 ` [PATCH 3/6] ASoC: SOF: ipc3: Add set_core_state pm_ops implementation Peter Ujfalusi
2022-06-10  8:35 ` [PATCH 4/6] ASoC: SOF: ipc4: " Peter Ujfalusi
2022-06-10  8:35 ` Peter Ujfalusi [this message]
2022-06-10  8:35 ` [PATCH 6/6] ASoC: SOF: ipc4: implement pm ctx_save callback Peter Ujfalusi
2022-06-10 17:29 ` [PATCH 0/6] ASoC: SOF: Add support ctx_save with IPC4 Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220610083549.16773-6-peter.ujfalusi@linux.intel.com \
    --to=peter.ujfalusi@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=kai.vehmanen@linux.intel.com \
    --cc=lgirdwood@gmail.com \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=ranjani.sridharan@linux.intel.com \
    --cc=yung-chuan.liao@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox