From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
To: lgirdwood@gmail.com, broonie@kernel.org,
pierre-louis.bossart@linux.intel.com
Cc: alsa-devel@alsa-project.org, ranjani.sridharan@linux.intel.com,
kai.vehmanen@linux.intel.com
Subject: [PATCH 1/2] ASoC: SOF: Intel: hda: Introduce skip_imr_boot flag
Date: Tue, 12 Jul 2022 15:09:35 +0300 [thread overview]
Message-ID: <20220712120936.28072-2-peter.ujfalusi@linux.intel.com> (raw)
In-Reply-To: <20220712120936.28072-1-peter.ujfalusi@linux.intel.com>
Use a dedicated flag instead of directly checking the
sdev->system_suspend_target to decide if we need to skip IMR boot due to
too deep sleep state where the memory used for IMR booting will not retain
its content.
The skip_imr_boot flag will be set true during suspend if the target state
is deeper than S3 and reset back to false on successful boot to re-enable
IMR booting in shallower sleep states.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
---
sound/soc/sof/intel/hda-dsp.c | 7 +++++++
sound/soc/sof/intel/hda-loader.c | 10 ++++++----
sound/soc/sof/intel/hda.h | 1 +
3 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/sound/soc/sof/intel/hda-dsp.c b/sound/soc/sof/intel/hda-dsp.c
index 2afaee91b982..eddfd77ad90f 100644
--- a/sound/soc/sof/intel/hda-dsp.c
+++ b/sound/soc/sof/intel/hda-dsp.c
@@ -617,6 +617,13 @@ static int hda_suspend(struct snd_sof_dev *sdev, bool runtime_suspend)
#endif
int ret, j;
+ /*
+ * The memory used for IMR boot loses its content in deeper than S3 state
+ * We must not try IMR boot on next power up (as it will fail).
+ */
+ if (sdev->system_suspend_target > SOF_SUSPEND_S3)
+ hda->skip_imr_boot = true;
+
hda_sdw_int_enable(sdev, false);
/* disable IPC interrupts */
diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c
index 819b3b08c655..eb22eb3f6fee 100644
--- a/sound/soc/sof/intel/hda-loader.c
+++ b/sound/soc/sof/intel/hda-loader.c
@@ -395,8 +395,7 @@ int hda_dsp_cl_boot_firmware(struct snd_sof_dev *sdev)
struct snd_dma_buffer dmab;
int ret, ret1, i;
- if (sdev->system_suspend_target < SOF_SUSPEND_S4 &&
- hda->imrboot_supported && !sdev->first_boot) {
+ if (hda->imrboot_supported && !sdev->first_boot && !hda->skip_imr_boot) {
dev_dbg(sdev->dev, "IMR restore supported, booting from IMR directly\n");
hda->boot_iteration = 0;
ret = hda_dsp_boot_imr(sdev);
@@ -480,11 +479,14 @@ int hda_dsp_cl_boot_firmware(struct snd_sof_dev *sdev)
*/
hda->boot_iteration = HDA_FW_BOOT_ATTEMPTS;
ret = hda_cl_copy_fw(sdev, hext_stream);
- if (!ret)
+ if (!ret) {
dev_dbg(sdev->dev, "Firmware download successful, booting...\n");
- else
+ hda->skip_imr_boot = false;
+ } else {
snd_sof_dsp_dbg_dump(sdev, "Firmware download failed",
SOF_DBG_DUMP_PCI | SOF_DBG_DUMP_MBOX);
+ hda->skip_imr_boot = true;
+ }
cleanup:
/*
diff --git a/sound/soc/sof/intel/hda.h b/sound/soc/sof/intel/hda.h
index dc713c20ba1d..2b4d23af6054 100644
--- a/sound/soc/sof/intel/hda.h
+++ b/sound/soc/sof/intel/hda.h
@@ -419,6 +419,7 @@ enum sof_hda_D0_substate {
/* represents DSP HDA controller frontend - i.e. host facing control */
struct sof_intel_hda_dev {
bool imrboot_supported;
+ bool skip_imr_boot;
int boot_iteration;
--
2.37.0
next prev parent reply other threads:[~2022-07-12 12:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-12 12:09 [PATCH 0/2] ASoC: SOF: Intel: hda: Use cold/purge boot after firmware crash Peter Ujfalusi
2022-07-12 12:09 ` Peter Ujfalusi [this message]
2022-07-12 12:09 ` [PATCH 2/2] ASoC: SOF: Intel: hda: Skip IMR boot after a firmware crash or boot failure Peter Ujfalusi
2022-07-12 15:10 ` [PATCH 0/2] ASoC: SOF: Intel: hda: Use cold/purge boot after firmware crash Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220712120936.28072-2-peter.ujfalusi@linux.intel.com \
--to=peter.ujfalusi@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=kai.vehmanen@linux.intel.com \
--cc=lgirdwood@gmail.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox