From: Bard Liao <yung-chuan.liao@linux.intel.com>
To: alsa-devel@alsa-project.org, vkoul@kernel.org
Cc: pierre-louis.bossart@linux.intel.com, vinod.koul@linaro.org,
bard.liao@intel.com, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] soundwire: remove is_sdca boolean property
Date: Fri, 11 Nov 2022 10:16:32 +0800 [thread overview]
Message-ID: <20221111021633.39908-2-yung-chuan.liao@linux.intel.com> (raw)
In-Reply-To: <20221111021633.39908-1-yung-chuan.liao@linux.intel.com>
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
The Device_ID registers already tell us if a device supports the SDCA
specification or not, in hindsight we never needed a property when the
information is reported by both hardware and ACPI.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
drivers/soundwire/bus.c | 4 ++--
include/linux/soundwire/sdw.h | 2 --
sound/soc/codecs/rt1316-sdw.c | 1 -
sound/soc/codecs/rt711-sdca-sdw.c | 1 -
4 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index 76515c33e639..c23275b443ac 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -1587,7 +1587,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
goto io_err;
}
- if (slave->prop.is_sdca) {
+ if (slave->id.class_id) {
ret = sdw_read_no_pm(slave, SDW_DP0_INT);
if (ret < 0) {
dev_err(&slave->dev,
@@ -1724,7 +1724,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
goto io_err;
}
- if (slave->prop.is_sdca) {
+ if (slave->id.class_id) {
ret = sdw_read_no_pm(slave, SDW_DP0_INT);
if (ret < 0) {
dev_err(&slave->dev,
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 9e4537f409c2..8fb458931772 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -365,7 +365,6 @@ struct sdw_dpn_prop {
* @sink_dpn_prop: Sink Data Port N properties
* @scp_int1_mask: SCP_INT1_MASK desired settings
* @quirks: bitmask identifying deltas from the MIPI specification
- * @is_sdca: the Slave supports the SDCA specification
*/
struct sdw_slave_prop {
u32 mipi_revision;
@@ -389,7 +388,6 @@ struct sdw_slave_prop {
struct sdw_dpn_prop *sink_dpn_prop;
u8 scp_int1_mask;
u32 quirks;
- bool is_sdca;
};
#define SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY BIT(0)
diff --git a/sound/soc/codecs/rt1316-sdw.c b/sound/soc/codecs/rt1316-sdw.c
index ed0a11436362..8b27401237f7 100644
--- a/sound/soc/codecs/rt1316-sdw.c
+++ b/sound/soc/codecs/rt1316-sdw.c
@@ -203,7 +203,6 @@ static int rt1316_read_prop(struct sdw_slave *slave)
prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
- prop->is_sdca = true;
prop->paging_support = true;
diff --git a/sound/soc/codecs/rt711-sdca-sdw.c b/sound/soc/codecs/rt711-sdca-sdw.c
index 4120842fe699..6ca8795eed68 100644
--- a/sound/soc/codecs/rt711-sdca-sdw.c
+++ b/sound/soc/codecs/rt711-sdca-sdw.c
@@ -186,7 +186,6 @@ static int rt711_sdca_read_prop(struct sdw_slave *slave)
prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
- prop->is_sdca = true;
prop->paging_support = true;
--
2.25.1
next prev parent reply other threads:[~2022-11-11 2:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-11 2:16 [PATCH 0/2] soundwire: revisit support for clock registers Bard Liao
2022-11-11 2:16 ` Bard Liao [this message]
2022-11-23 14:44 ` [PATCH 1/2] soundwire: remove is_sdca boolean property Vinod Koul
2022-11-11 2:16 ` [PATCH 2/2] soundwire: enable optional clock registers for SoundWire 1.2 devices Bard Liao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221111021633.39908-2-yung-chuan.liao@linux.intel.com \
--to=yung-chuan.liao@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=bard.liao@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=vinod.koul@linaro.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox