[PATCH 1/9] sound: sdw: Add hw_params to SoundWire config helper function

[PATCH 1/9] sound: sdw: Add hw_params to SoundWire config helper function

[Charles Keepax]

The vast majority of the current users of the SoundWire framework
have almost identical code for converting from hw_params to SoundWire
configuration. Whilst complex devices might require more, it is very
likely that most new devices will follow the same pattern. Save a
little code by factoring this out into a helper function.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---

I was a little bit two minds about whether to make this an inline or
not, so any thoughts on that would be super welcome. The function does
very little, especially given that SNDRV_PCM_STREAM_PLAYBACK ==
SDW_DATA_DIR_RX so the if is also really just an assignment.

Thanks,
Charles

 include/sound/sdw.h | 49 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 include/sound/sdw.h

diff --git a/include/sound/sdw.h b/include/sound/sdw.h
new file mode 100644
index 0000000000000..6dcdb3228dba6
--- /dev/null
+++ b/include/sound/sdw.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * linux/sound/sdw.h -- SoundWire helpers for ALSA/ASoC
+ *
+ * Copyright (c) 2022 Cirrus Logic Inc.
+ *
+ * Author: Charles Keepax <ckeepax@opensource.cirrus.com>
+ */
+
+#include <linux/soundwire/sdw.h>
+#include <sound/asound.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#ifndef __INCLUDE_SOUND_SDW_H
+#define __INCLUDE_SOUND_SDW_H
+
+/**
+ * snd_sdw_params_to_config() - Conversion from hw_params to SoundWire config
+ *
+ * @substream: Pointer to the PCM substream structure
+ * @params: Pointer to the hardware params structure
+ * @stream_config: Stream configuration for the SoundWire audio stream
+ * @port_config: Port configuration for the SoundWire audio stream
+ *
+ * This function provides a basic conversion from the hw_params structure to
+ * SoundWire configuration structures. The user will at a minimum need to also
+ * set the port number in the port config, but may also override more of the
+ * setup, or in the case of a complex user, not use this helper at all and
+ * open-code everything.
+ */
+static inline void snd_sdw_params_to_config(struct snd_pcm_substream *substream,
+					    struct snd_pcm_hw_params *params,
+					    struct sdw_stream_config *stream_config,
+					    struct sdw_port_config *port_config)
+{
+	stream_config->frame_rate = params_rate(params);
+	stream_config->ch_count = params_channels(params);
+	stream_config->bps = snd_pcm_format_width(params_format(params));
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		stream_config->direction = SDW_DATA_DIR_RX;
+	else
+		stream_config->direction = SDW_DATA_DIR_TX;
+
+	port_config->ch_mask = GENMASK(stream_config->ch_count - 1, 0);
+}
+
+#endif
-- 
2.30.2

[PATCH 2/9] ASoC: max98373-sdw: Switch to new snd_sdw_params_to_config helper

[Charles Keepax]

The conversation from hw_params to SoundWire config is pretty
standard as such most of the conversation can be handled by the new
snd_sdw_params_to_config helper function.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/max98373-sdw.c | 31 +++++++++++--------------------
 1 file changed, 11 insertions(+), 20 deletions(-)

diff --git a/sound/soc/codecs/max98373-sdw.c b/sound/soc/codecs/max98373-sdw.c
index 899965b19d12d..3cd1be743d9ee 100644
--- a/sound/soc/codecs/max98373-sdw.c
+++ b/sound/soc/codecs/max98373-sdw.c
@@ -10,6 +10,7 @@
 #include <linux/slab.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
+#include <sound/sdw.h>
 #include <sound/soc.h>
 #include <sound/tlv.h>
 #include <linux/of.h>
@@ -533,10 +534,8 @@ static int max98373_sdw_dai_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_component *component = dai->component;
 	struct max98373_priv *max98373 =
 		snd_soc_component_get_drvdata(component);
-
-	struct sdw_stream_config stream_config;
-	struct sdw_port_config port_config;
-	enum sdw_data_direction direction;
+	struct sdw_stream_config stream_config = {0};
+	struct sdw_port_config port_config = {0};
 	struct sdw_stream_data *stream;
 	int ret, chan_sz, sampling_rate;
 
@@ -548,28 +547,20 @@ static int max98373_sdw_dai_hw_params(struct snd_pcm_substream *substream,
 	if (!max98373->slave)
 		return -EINVAL;
 
+	snd_sdw_params_to_config(substream, params, &stream_config, &port_config);
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		direction = SDW_DATA_DIR_RX;
 		port_config.num = 1;
+
+		if (max98373->slot) {
+			stream_config.ch_count = max98373->slot;
+			port_config.ch_mask = max98373->rx_mask;
+		}
 	} else {
-		direction = SDW_DATA_DIR_TX;
 		port_config.num = 3;
-	}
 
-	stream_config.frame_rate = params_rate(params);
-	stream_config.bps = snd_pcm_format_width(params_format(params));
-	stream_config.direction = direction;
-
-	if (max98373->slot && direction == SDW_DATA_DIR_RX) {
-		stream_config.ch_count = max98373->slot;
-		port_config.ch_mask = max98373->rx_mask;
-	} else {
 		/* only IV are supported by capture */
-		if (direction == SDW_DATA_DIR_TX)
-			stream_config.ch_count = 2;
-		else
-			stream_config.ch_count = params_channels(params);
-
+		stream_config.ch_count = 2;
 		port_config.ch_mask = GENMASK((int)stream_config.ch_count - 1, 0);
 	}
 
-- 
2.30.2

Re: [PATCH 2/9] ASoC: max98373-sdw: Switch to new snd_sdw_params_to_config helper

[Richard Fitzgerald]

On 21/11/2022 13:46, Charles Keepax wrote:
> The conversation from hw_params to SoundWire config is pretty
s/conversation/conversion

> standard as such most of the conversation can be handled by the new
> snd_sdw_params_to_config helper function.
> 
> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> ---
>   sound/soc/codecs/max98373-sdw.c | 31 +++++++++++--------------------
>   1 file changed, 11 insertions(+), 20 deletions(-)
> 
> diff --git a/sound/soc/codecs/max98373-sdw.c b/sound/soc/codecs/max98373-sdw.c
> index 899965b19d12d..3cd1be743d9ee 100644
> --- a/sound/soc/codecs/max98373-sdw.c
> +++ b/sound/soc/codecs/max98373-sdw.c
> @@ -10,6 +10,7 @@
>   #include <linux/slab.h>
>   #include <sound/pcm.h>
>   #include <sound/pcm_params.h>
> +#include <sound/sdw.h>
>   #include <sound/soc.h>
>   #include <sound/tlv.h>
>   #include <linux/of.h>
> @@ -533,10 +534,8 @@ static int max98373_sdw_dai_hw_params(struct snd_pcm_substream *substream,
>   	struct snd_soc_component *component = dai->component;
>   	struct max98373_priv *max98373 =
>   		snd_soc_component_get_drvdata(component);
> -
> -	struct sdw_stream_config stream_config;
> -	struct sdw_port_config port_config;
> -	enum sdw_data_direction direction;
> +	struct sdw_stream_config stream_config = {0};
> +	struct sdw_port_config port_config = {0};
>   	struct sdw_stream_data *stream;
>   	int ret, chan_sz, sampling_rate;
>   
> @@ -548,28 +547,20 @@ static int max98373_sdw_dai_hw_params(struct snd_pcm_substream *substream,
>   	if (!max98373->slave)
>   		return -EINVAL;
>   
> +	snd_sdw_params_to_config(substream, params, &stream_config, &port_config);
> +
>   	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> -		direction = SDW_DATA_DIR_RX;
>   		port_config.num = 1;
> +
> +		if (max98373->slot) {
> +			stream_config.ch_count = max98373->slot;
> +			port_config.ch_mask = max98373->rx_mask;
> +		}
>   	} else {
> -		direction = SDW_DATA_DIR_TX;
>   		port_config.num = 3;
> -	}
>   
> -	stream_config.frame_rate = params_rate(params);
> -	stream_config.bps = snd_pcm_format_width(params_format(params));
> -	stream_config.direction = direction;
> -
> -	if (max98373->slot && direction == SDW_DATA_DIR_RX) {
> -		stream_config.ch_count = max98373->slot;
> -		port_config.ch_mask = max98373->rx_mask;
> -	} else {
>   		/* only IV are supported by capture */
> -		if (direction == SDW_DATA_DIR_TX)
> -			stream_config.ch_count = 2;
Has this special case gone missing or is it already guaranteed by the
DAI config?

> -		else
> -			stream_config.ch_count = params_channels(params);
> -
> +		stream_config.ch_count = 2;
>   		port_config.ch_mask = GENMASK((int)stream_config.ch_count - 1, 0);
this is already done by snd_sdw_params_to_config()

Re: [PATCH 2/9] ASoC: max98373-sdw: Switch to new snd_sdw_params_to_config helper

[Charles Keepax]

On Mon, Nov 21, 2022 at 04:31:42PM +0000, Richard Fitzgerald wrote:
> On 21/11/2022 13:46, Charles Keepax wrote:
> >The conversation from hw_params to SoundWire config is pretty
> s/conversation/conversion
> 

lol oops thanks for that will resend to fix that up its the whole
series.

> >  	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> >-		direction = SDW_DATA_DIR_RX;
> >  		port_config.num = 1;
> >+
> >+		if (max98373->slot) {
> >+			stream_config.ch_count = max98373->slot;
> >+			port_config.ch_mask = max98373->rx_mask;
> >+		}
> >  	} else {
> >-		direction = SDW_DATA_DIR_TX;
> >  		port_config.num = 3;
> >-	}
> >-	stream_config.frame_rate = params_rate(params);
> >-	stream_config.bps = snd_pcm_format_width(params_format(params));
> >-	stream_config.direction = direction;
> >-
> >-	if (max98373->slot && direction == SDW_DATA_DIR_RX) {
> >-		stream_config.ch_count = max98373->slot;
> >-		port_config.ch_mask = max98373->rx_mask;
> >-	} else {
> >  		/* only IV are supported by capture */
> >-		if (direction == SDW_DATA_DIR_TX)
> >-			stream_config.ch_count = 2;
> Has this special case gone missing or is it already guaranteed by the
> DAI config?
> 

This special case is still there, it is just below where you made
your next comment. All this case equates to is if direction is
TX/CAPTURE set the number of channels to 2.

> >-		else
> >-			stream_config.ch_count = params_channels(params);
> >-
> >+		stream_config.ch_count = 2;
> >  		port_config.ch_mask = GENMASK((int)stream_config.ch_count - 1, 0);
> this is already done by snd_sdw_params_to_config()

Not in this case because we just forced the channel count to 2,
so we probably need to regenerate the mask too.

Thanks,
Charles

[PATCH 3/9] ASoC: rt1308-sdw: Switch to new snd_sdw_params_to_config helper

[Charles Keepax]

The conversation from hw_params to SoundWire config is pretty
standard as such most of the conversation can be handled by the new
snd_sdw_params_to_config helper function.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/rt1308-sdw.c | 33 +++++++++++----------------------
 1 file changed, 11 insertions(+), 22 deletions(-)

diff --git a/sound/soc/codecs/rt1308-sdw.c b/sound/soc/codecs/rt1308-sdw.c
index 7f4248284f35e..ca2790d63b719 100644
--- a/sound/soc/codecs/rt1308-sdw.c
+++ b/sound/soc/codecs/rt1308-sdw.c
@@ -17,6 +17,7 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
+#include <sound/sdw.h>
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 #include <sound/initval.h>
@@ -553,11 +554,10 @@ static int rt1308_sdw_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_component *component = dai->component;
 	struct rt1308_sdw_priv *rt1308 =
 		snd_soc_component_get_drvdata(component);
-	struct sdw_stream_config stream_config;
-	struct sdw_port_config port_config;
-	enum sdw_data_direction direction;
+	struct sdw_stream_config stream_config = {0};
+	struct sdw_port_config port_config = {0};
 	struct sdw_stream_data *stream;
-	int retval, port, num_channels, ch_mask;
+	int retval;
 
 	dev_dbg(dai->dev, "%s %s", __func__, dai->name);
 	stream = snd_soc_dai_get_dma_data(dai, substream);
@@ -569,30 +569,19 @@ static int rt1308_sdw_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 
 	/* SoundWire specific configuration */
+	snd_sdw_params_to_config(substream, params, &stream_config, &port_config);
+
 	/* port 1 for playback */
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		direction = SDW_DATA_DIR_RX;
-		port = 1;
-	} else {
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		port_config.num = 1;
+	else
 		return -EINVAL;
-	}
 
 	if (rt1308->slots) {
-		num_channels = rt1308->slots;
-		ch_mask = rt1308->rx_mask;
-	} else {
-		num_channels = params_channels(params);
-		ch_mask = (1 << num_channels) - 1;
+		stream_config.ch_count = rt1308->slots;
+		port_config.ch_mask = rt1308->rx_mask;
 	}
 
-	stream_config.frame_rate = params_rate(params);
-	stream_config.ch_count = num_channels;
-	stream_config.bps = snd_pcm_format_width(params_format(params));
-	stream_config.direction = direction;
-
-	port_config.ch_mask = ch_mask;
-	port_config.num = port;
-
 	retval = sdw_stream_add_slave(rt1308->sdw_slave, &stream_config,
 				&port_config, 1, stream->sdw_stream);
 	if (retval) {
-- 
2.30.2

[PATCH 4/9] ASoC: rt1316-sdw: Switch to new snd_sdw_params_to_config helper

[Charles Keepax]

The conversation from hw_params to SoundWire config is pretty
standard as such most of the conversation can be handled by the new
snd_sdw_params_to_config helper function.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/rt1316-sdw.c | 32 ++++++++++----------------------
 1 file changed, 10 insertions(+), 22 deletions(-)

diff --git a/sound/soc/codecs/rt1316-sdw.c b/sound/soc/codecs/rt1316-sdw.c
index 2db7ee6c6d334..e6294cc7a9954 100644
--- a/sound/soc/codecs/rt1316-sdw.c
+++ b/sound/soc/codecs/rt1316-sdw.c
@@ -14,6 +14,7 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
+#include <sound/sdw.h>
 #include <sound/soc-dapm.h>
 #include <sound/initval.h>
 #include "rt1316-sdw.h"
@@ -530,11 +531,10 @@ static int rt1316_sdw_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_component *component = dai->component;
 	struct rt1316_sdw_priv *rt1316 =
 		snd_soc_component_get_drvdata(component);
-	struct sdw_stream_config stream_config;
-	struct sdw_port_config port_config;
-	enum sdw_data_direction direction;
+	struct sdw_stream_config stream_config = {0};
+	struct sdw_port_config port_config = {0};
 	struct sdw_stream_data *stream;
-	int retval, port, num_channels, ch_mask;
+	int retval;
 
 	dev_dbg(dai->dev, "%s %s", __func__, dai->name);
 	stream = snd_soc_dai_get_dma_data(dai, substream);
@@ -546,25 +546,13 @@ static int rt1316_sdw_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 
 	/* SoundWire specific configuration */
-	/* port 1 for playback */
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		direction = SDW_DATA_DIR_RX;
-		port = 1;
-	} else {
-		direction = SDW_DATA_DIR_TX;
-		port = 2;
-	}
-
-	num_channels = params_channels(params);
-	ch_mask = (1 << num_channels) - 1;
+	snd_sdw_params_to_config(substream, params, &stream_config, &port_config);
 
-	stream_config.frame_rate = params_rate(params);
-	stream_config.ch_count = num_channels;
-	stream_config.bps = snd_pcm_format_width(params_format(params));
-	stream_config.direction = direction;
-
-	port_config.ch_mask = ch_mask;
-	port_config.num = port;
+	/* port 1 for playback */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		port_config.num = 1;
+	else
+		port_config.num = 2;
 
 	retval = sdw_stream_add_slave(rt1316->sdw_slave, &stream_config,
 				&port_config, 1, stream->sdw_stream);
-- 
2.30.2

[PATCH 5/9] ASoC: rt5682-sdw: Switch to new snd_sdw_params_to_config helper

[Charles Keepax]

The conversation from hw_params to SoundWire config is pretty
standard as such most of the conversation can be handled by the new
snd_sdw_params_to_config helper function.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/rt5682-sdw.c | 28 +++++++++-------------------
 1 file changed, 9 insertions(+), 19 deletions(-)

diff --git a/sound/soc/codecs/rt5682-sdw.c b/sound/soc/codecs/rt5682-sdw.c
index c1a94229dc7e3..d8a573dcb771b 100644
--- a/sound/soc/codecs/rt5682-sdw.c
+++ b/sound/soc/codecs/rt5682-sdw.c
@@ -24,6 +24,7 @@
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/jack.h>
+#include <sound/sdw.h>
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 #include <sound/initval.h>
@@ -130,11 +131,10 @@ static int rt5682_sdw_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_component *component = dai->component;
 	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
-	struct sdw_stream_config stream_config;
-	struct sdw_port_config port_config;
-	enum sdw_data_direction direction;
+	struct sdw_stream_config stream_config = {0};
+	struct sdw_port_config port_config = {0};
 	struct sdw_stream_data *stream;
-	int retval, port, num_channels;
+	int retval;
 	unsigned int val_p = 0, val_c = 0, osr_p = 0, osr_c = 0;
 
 	dev_dbg(dai->dev, "%s %s", __func__, dai->name);
@@ -147,22 +147,12 @@ static int rt5682_sdw_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 
 	/* SoundWire specific configuration */
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		direction = SDW_DATA_DIR_RX;
-		port = 1;
-	} else {
-		direction = SDW_DATA_DIR_TX;
-		port = 2;
-	}
+	snd_sdw_params_to_config(substream, params, &stream_config, &port_config);
 
-	stream_config.frame_rate = params_rate(params);
-	stream_config.ch_count = params_channels(params);
-	stream_config.bps = snd_pcm_format_width(params_format(params));
-	stream_config.direction = direction;
-
-	num_channels = params_channels(params);
-	port_config.ch_mask = (1 << (num_channels)) - 1;
-	port_config.num = port;
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		port_config.num = 1;
+	else
+		port_config.num = 2;
 
 	retval = sdw_stream_add_slave(rt5682->slave, &stream_config,
 				      &port_config, 1, stream->sdw_stream);
-- 
2.30.2

[PATCH 6/9] ASoC: rt700: Switch to new snd_sdw_params_to_config helper

[Charles Keepax]

The conversation from hw_params to SoundWire config is pretty
standard as such most of the conversation can be handled by the new
snd_sdw_params_to_config helper function.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/rt700.c | 32 +++++++++++---------------------
 1 file changed, 11 insertions(+), 21 deletions(-)

diff --git a/sound/soc/codecs/rt700.c b/sound/soc/codecs/rt700.c
index 055c3ae974d80..6534c9b514428 100644
--- a/sound/soc/codecs/rt700.c
+++ b/sound/soc/codecs/rt700.c
@@ -19,6 +19,7 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
+#include <sound/sdw.h>
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 #include <sound/initval.h>
@@ -910,11 +911,10 @@ static int rt700_pcm_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_component *component = dai->component;
 	struct rt700_priv *rt700 = snd_soc_component_get_drvdata(component);
-	struct sdw_stream_config stream_config;
-	struct sdw_port_config port_config;
-	enum sdw_data_direction direction;
+	struct sdw_stream_config stream_config = {0};
+	struct sdw_port_config port_config = {0};
 	struct sdw_stream_data *stream;
-	int retval, port, num_channels;
+	int retval;
 	unsigned int val = 0;
 
 	dev_dbg(dai->dev, "%s %s", __func__, dai->name);
@@ -927,35 +927,25 @@ static int rt700_pcm_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 
 	/* SoundWire specific configuration */
+	snd_sdw_params_to_config(substream, params, &stream_config, &port_config);
+
 	/* This code assumes port 1 for playback and port 2 for capture */
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		direction = SDW_DATA_DIR_RX;
-		port = 1;
-	} else {
-		direction = SDW_DATA_DIR_TX;
-		port = 2;
-	}
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		port_config.num = 1;
+	else
+		port_config.num = 2;
 
 	switch (dai->id) {
 	case RT700_AIF1:
 		break;
 	case RT700_AIF2:
-		port += 2;
+		port_config.num += 2;
 		break;
 	default:
 		dev_err(component->dev, "Invalid DAI id %d\n", dai->id);
 		return -EINVAL;
 	}
 
-	stream_config.frame_rate = params_rate(params);
-	stream_config.ch_count = params_channels(params);
-	stream_config.bps = snd_pcm_format_width(params_format(params));
-	stream_config.direction = direction;
-
-	num_channels = params_channels(params);
-	port_config.ch_mask = (1 << (num_channels)) - 1;
-	port_config.num = port;
-
 	retval = sdw_stream_add_slave(rt700->slave, &stream_config,
 					&port_config, 1, stream->sdw_stream);
 	if (retval) {
-- 
2.30.2

[PATCH 7/9] ASoC: rt711: Switch to new snd_sdw_params_to_config helper

[Charles Keepax]

The conversation from hw_params to SoundWire config is pretty
standard as such most of the conversation can be handled by the new
snd_sdw_params_to_config helper function.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/rt711-sdca.c | 27 +++++++++------------------
 sound/soc/codecs/rt711.c      | 27 +++++++++------------------
 2 files changed, 18 insertions(+), 36 deletions(-)

diff --git a/sound/soc/codecs/rt711-sdca.c b/sound/soc/codecs/rt711-sdca.c
index 9252681219017..b78dd5994edbf 100644
--- a/sound/soc/codecs/rt711-sdca.c
+++ b/sound/soc/codecs/rt711-sdca.c
@@ -18,6 +18,7 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
+#include <sound/sdw.h>
 #include <sound/soc-dapm.h>
 #include <sound/initval.h>
 #include <sound/tlv.h>
@@ -1257,11 +1258,10 @@ static int rt711_sdca_pcm_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_component *component = dai->component;
 	struct rt711_sdca_priv *rt711 = snd_soc_component_get_drvdata(component);
-	struct sdw_stream_config stream_config;
-	struct sdw_port_config port_config;
-	enum sdw_data_direction direction;
+	struct sdw_stream_config stream_config = {0};
+	struct sdw_port_config port_config = {0};
 	struct sdw_stream_data *stream;
-	int retval, port, num_channels;
+	int retval;
 	unsigned int sampling_rate;
 
 	dev_dbg(dai->dev, "%s %s", __func__, dai->name);
@@ -1274,28 +1274,19 @@ static int rt711_sdca_pcm_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 
 	/* SoundWire specific configuration */
+	snd_sdw_params_to_config(substream, params, &stream_config, &port_config);
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		direction = SDW_DATA_DIR_RX;
-		port = 3;
+		port_config.num = 3;
 	} else {
-		direction = SDW_DATA_DIR_TX;
 		if (dai->id == RT711_AIF1)
-			port = 2;
+			port_config.num = 2;
 		else if (dai->id == RT711_AIF2)
-			port = 4;
+			port_config.num = 4;
 		else
 			return -EINVAL;
 	}
 
-	stream_config.frame_rate = params_rate(params);
-	stream_config.ch_count = params_channels(params);
-	stream_config.bps = snd_pcm_format_width(params_format(params));
-	stream_config.direction = direction;
-
-	num_channels = params_channels(params);
-	port_config.ch_mask = GENMASK(num_channels - 1, 0);
-	port_config.num = port;
-
 	retval = sdw_stream_add_slave(rt711->slave, &stream_config,
 					&port_config, 1, stream->sdw_stream);
 	if (retval) {
diff --git a/sound/soc/codecs/rt711.c b/sound/soc/codecs/rt711.c
index 1bf6180891942..78e1da9b07388 100644
--- a/sound/soc/codecs/rt711.c
+++ b/sound/soc/codecs/rt711.c
@@ -19,6 +19,7 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
+#include <sound/sdw.h>
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 #include <sound/initval.h>
@@ -999,11 +1000,10 @@ static int rt711_pcm_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_component *component = dai->component;
 	struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component);
-	struct sdw_stream_config stream_config;
-	struct sdw_port_config port_config;
-	enum sdw_data_direction direction;
+	struct sdw_stream_config stream_config = {0};
+	struct sdw_port_config port_config = {0};
 	struct sdw_stream_data *stream;
-	int retval, port, num_channels;
+	int retval;
 	unsigned int val = 0;
 
 	dev_dbg(dai->dev, "%s %s", __func__, dai->name);
@@ -1016,28 +1016,19 @@ static int rt711_pcm_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 
 	/* SoundWire specific configuration */
+	snd_sdw_params_to_config(substream, params, &stream_config, &port_config);
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		direction = SDW_DATA_DIR_RX;
-		port = 3;
+		port_config.num = 3;
 	} else {
-		direction = SDW_DATA_DIR_TX;
 		if (dai->id == RT711_AIF1)
-			port = 4;
+			port_config.num = 4;
 		else if (dai->id == RT711_AIF2)
-			port = 2;
+			port_config.num = 2;
 		else
 			return -EINVAL;
 	}
 
-	stream_config.frame_rate = params_rate(params);
-	stream_config.ch_count = params_channels(params);
-	stream_config.bps = snd_pcm_format_width(params_format(params));
-	stream_config.direction = direction;
-
-	num_channels = params_channels(params);
-	port_config.ch_mask = (1 << (num_channels)) - 1;
-	port_config.num = port;
-
 	retval = sdw_stream_add_slave(rt711->slave, &stream_config,
 					&port_config, 1, stream->sdw_stream);
 	if (retval) {
-- 
2.30.2

[PATCH 8/9] ASoC: rt715: Switch to new snd_sdw_params_to_config helper

[Charles Keepax]

The conversation from hw_params to SoundWire config is pretty
standard as such most of the conversation can be handled by the new
snd_sdw_params_to_config helper function.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/rt715-sdca.c | 25 ++++++++-----------------
 sound/soc/codecs/rt715.c      | 25 ++++++++-----------------
 2 files changed, 16 insertions(+), 34 deletions(-)

diff --git a/sound/soc/codecs/rt715-sdca.c b/sound/soc/codecs/rt715-sdca.c
index ce8bbc76199a8..1fca7a3f46eac 100644
--- a/sound/soc/codecs/rt715-sdca.c
+++ b/sound/soc/codecs/rt715-sdca.c
@@ -20,6 +20,7 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
+#include <sound/sdw.h>
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 #include <sound/initval.h>
@@ -820,11 +821,10 @@ static int rt715_sdca_pcm_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_component *component = dai->component;
 	struct rt715_sdca_priv *rt715 = snd_soc_component_get_drvdata(component);
-	struct sdw_stream_config stream_config;
-	struct sdw_port_config port_config;
-	enum sdw_data_direction direction;
+	struct sdw_stream_config stream_config = {0};
+	struct sdw_port_config port_config = {0};
 	struct rt715_sdw_stream_data *stream;
-	int retval, port, num_channels;
+	int retval;
 	unsigned int val;
 
 	stream = snd_soc_dai_get_dma_data(dai, substream);
@@ -835,16 +835,16 @@ static int rt715_sdca_pcm_hw_params(struct snd_pcm_substream *substream,
 	if (!rt715->slave)
 		return -EINVAL;
 
+	snd_sdw_params_to_config(substream, params, &stream_config, &port_config);
+
 	switch (dai->id) {
 	case RT715_AIF1:
-		direction = SDW_DATA_DIR_TX;
-		port = 6;
+		port_config.num = 6;
 		rt715_sdca_index_write(rt715, RT715_VENDOR_REG, RT715_SDW_INPUT_SEL,
 			0xa500);
 		break;
 	case RT715_AIF2:
-		direction = SDW_DATA_DIR_TX;
-		port = 4;
+		port_config.num = 4;
 		rt715_sdca_index_write(rt715, RT715_VENDOR_REG, RT715_SDW_INPUT_SEL,
 			0xaf00);
 		break;
@@ -853,15 +853,6 @@ static int rt715_sdca_pcm_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	stream_config.frame_rate =  params_rate(params);
-	stream_config.ch_count = params_channels(params);
-	stream_config.bps = snd_pcm_format_width(params_format(params));
-	stream_config.direction = direction;
-
-	num_channels = params_channels(params);
-	port_config.ch_mask = GENMASK(num_channels - 1, 0);
-	port_config.num = port;
-
 	retval = sdw_stream_add_slave(rt715->slave, &stream_config,
 					&port_config, 1, stream->sdw_stream);
 	if (retval) {
diff --git a/sound/soc/codecs/rt715.c b/sound/soc/codecs/rt715.c
index e93240521c74e..917a04092da27 100644
--- a/sound/soc/codecs/rt715.c
+++ b/sound/soc/codecs/rt715.c
@@ -28,6 +28,7 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
+#include <sound/sdw.h>
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 #include <sound/initval.h>
@@ -801,11 +802,10 @@ static int rt715_pcm_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_component *component = dai->component;
 	struct rt715_priv *rt715 = snd_soc_component_get_drvdata(component);
-	struct sdw_stream_config stream_config;
-	struct sdw_port_config port_config;
-	enum sdw_data_direction direction;
+	struct sdw_stream_config stream_config = {0};
+	struct sdw_port_config port_config = {0};
 	struct sdw_stream_data *stream;
-	int retval, port, num_channels;
+	int retval;
 	unsigned int val = 0;
 
 	stream = snd_soc_dai_get_dma_data(dai, substream);
@@ -816,15 +816,15 @@ static int rt715_pcm_hw_params(struct snd_pcm_substream *substream,
 	if (!rt715->slave)
 		return -EINVAL;
 
+	snd_sdw_params_to_config(substream, params, &stream_config, &port_config);
+
 	switch (dai->id) {
 	case RT715_AIF1:
-		direction = SDW_DATA_DIR_TX;
-		port = 6;
+		port_config.num = 6;
 		rt715_index_write(rt715->regmap, RT715_SDW_INPUT_SEL, 0xa500);
 		break;
 	case RT715_AIF2:
-		direction = SDW_DATA_DIR_TX;
-		port = 4;
+		port_config.num = 4;
 		rt715_index_write(rt715->regmap, RT715_SDW_INPUT_SEL, 0xa000);
 		break;
 	default:
@@ -832,15 +832,6 @@ static int rt715_pcm_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	stream_config.frame_rate =  params_rate(params);
-	stream_config.ch_count = params_channels(params);
-	stream_config.bps = snd_pcm_format_width(params_format(params));
-	stream_config.direction = direction;
-
-	num_channels = params_channels(params);
-	port_config.ch_mask = (1 << (num_channels)) - 1;
-	port_config.num = port;
-
 	retval = sdw_stream_add_slave(rt715->slave, &stream_config,
 					&port_config, 1, stream->sdw_stream);
 	if (retval) {
-- 
2.30.2

[PATCH 9/9] ASoC: sdw-mockup: Switch to new snd_sdw_params_to_config helper

[Charles Keepax]

The conversation from hw_params to SoundWire config is pretty
standard as such most of the conversation can be handled by the new
snd_sdw_params_to_config helper function.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/sdw-mockup.c | 28 ++++++++--------------------
 1 file changed, 8 insertions(+), 20 deletions(-)

diff --git a/sound/soc/codecs/sdw-mockup.c b/sound/soc/codecs/sdw-mockup.c
index 288b55368d2a4..af52f2728854b 100644
--- a/sound/soc/codecs/sdw-mockup.c
+++ b/sound/soc/codecs/sdw-mockup.c
@@ -16,6 +16,7 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
+#include <sound/sdw.h>
 #include <sound/soc.h>
 
 struct  sdw_mockup_priv {
@@ -80,12 +81,9 @@ static int sdw_mockup_pcm_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_component *component = dai->component;
 	struct sdw_mockup_priv *sdw_mockup = snd_soc_component_get_drvdata(component);
-	struct sdw_stream_config stream_config;
-	struct sdw_port_config port_config;
-	enum sdw_data_direction direction;
+	struct sdw_stream_config stream_config = {0};
+	struct sdw_port_config port_config = {0};
 	struct sdw_stream_data *stream;
-	int num_channels;
-	int port;
 	int ret;
 
 	stream = snd_soc_dai_get_dma_data(dai, substream);
@@ -96,22 +94,12 @@ static int sdw_mockup_pcm_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 
 	/* SoundWire specific configuration */
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		direction = SDW_DATA_DIR_RX;
-		port = 1;
-	} else {
-		direction = SDW_DATA_DIR_TX;
-		port = 8;
-	}
-
-	stream_config.frame_rate = params_rate(params);
-	stream_config.ch_count = params_channels(params);
-	stream_config.bps = snd_pcm_format_width(params_format(params));
-	stream_config.direction = direction;
+	snd_sdw_params_to_config(substream, params, &stream_config, &port_config);
 
-	num_channels = params_channels(params);
-	port_config.ch_mask = (1 << num_channels) - 1;
-	port_config.num = port;
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		port_config.num = 1;
+	else
+		port_config.num = 8;
 
 	ret = sdw_stream_add_slave(sdw_mockup->slave, &stream_config,
 				   &port_config, 1, stream->sdw_stream);
-- 
2.30.2