From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
To: lgirdwood@gmail.com, broonie@kernel.org
Cc: alsa-devel@alsa-project.org,
pierre-louis.bossart@linux.intel.com,
ranjani.sridharan@linux.intel.com, kai.vehmanen@linux.intel.com,
jyri.sarha@intel.com, rander.wang@intel.com, error27@gmail.com
Subject: [PATCH v2 2/3] ASoC: SOF: ipc4: Add macros for chain-dma message bits
Date: Wed, 22 Mar 2023 15:59:26 +0200 [thread overview]
Message-ID: <20230322135927.7668-3-peter.ujfalusi@linux.intel.com> (raw)
In-Reply-To: <20230322135927.7668-1-peter.ujfalusi@linux.intel.com>
From: Jyri Sarha <jyri.sarha@intel.com>
In the chained DMA mode, the firmware allocates buffers for the host
and link DMA, and takes care of copying data between host- and
link-DMA buffers in a low-latency thread. This is different to a
regular pipeline, no processing is allowed, and the connection between
host- and link DMA is handled with a dedicated IPC.
This patch exposes the macros needed to create the required IPC messages.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
---
| 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
--git a/include/sound/sof/ipc4/header.h b/include/sound/sof/ipc4/header.h
index 49ff1558a171..78568abe2673 100644
--- a/include/sound/sof/ipc4/header.h
+++ b/include/sound/sof/ipc4/header.h
@@ -196,6 +196,35 @@ enum sof_ipc4_pipeline_state {
#define SOF_IPC4_GLB_LOAD_LIBRARY_LIB_ID_SHIFT 16
#define SOF_IPC4_GLB_LOAD_LIBRARY_LIB_ID(x) ((x) << SOF_IPC4_GLB_LOAD_LIBRARY_LIB_ID_SHIFT)
+/* chain dma ipc message */
+#define SOF_IPC4_GLB_CHAIN_DMA_HOST_ID_SHIFT 0
+#define SOF_IPC4_GLB_CHAIN_DMA_HOST_ID_MASK GENMASK(4, 0)
+#define SOF_IPC4_GLB_CHAIN_DMA_HOST_ID(x) (((x) << SOF_IPC4_GLB_CHAIN_DMA_HOST_ID_SHIFT) & \
+ SOF_IPC4_GLB_CHAIN_DMA_HOST_ID_MASK)
+
+#define SOF_IPC4_GLB_CHAIN_DMA_LINK_ID_SHIFT 8
+#define SOF_IPC4_GLB_CHAIN_DMA_LINK_ID_MASK GENMASK(12, 8)
+#define SOF_IPC4_GLB_CHAIN_DMA_LINK_ID(x) (((x) << SOF_IPC4_GLB_CHAIN_DMA_LINK_ID_SHIFT) & \
+ SOF_IPC4_GLB_CHAIN_DMA_LINK_ID_MASK)
+
+#define SOF_IPC4_GLB_CHAIN_DMA_ALLOCATE_SHIFT 16
+#define SOF_IPC4_GLB_CHAIN_DMA_ALLOCATE_MASK BIT(16)
+#define SOF_IPC4_GLB_CHAIN_DMA_ALLOCATE(x) (((x) & 1) << SOF_IPC4_GLB_CHAIN_DMA_ALLOCATE_SHIFT)
+
+#define SOF_IPC4_GLB_CHAIN_DMA_ENABLE_SHIFT 17
+#define SOF_IPC4_GLB_CHAIN_DMA_ENABLE_MASK BIT(17)
+#define SOF_IPC4_GLB_CHAIN_DMA_ENABLE(x) (((x) & 1) << SOF_IPC4_GLB_CHAIN_DMA_ENABLE_SHIFT)
+
+#define SOF_IPC4_GLB_CHAIN_DMA_SCS_SHIFT 18
+#define SOF_IPC4_GLB_CHAIN_DMA_SCS_MASK BIT(18)
+#define SOF_IPC4_GLB_CHAIN_DMA_SCS(x) (((x) & 1) << SOF_IPC4_GLB_CHAIN_DMA_SCS_SHIFT)
+
+#define SOF_IPC4_GLB_EXT_CHAIN_DMA_FIFO_SIZE_SHIFT 0
+#define SOF_IPC4_GLB_EXT_CHAIN_DMA_FIFO_SIZE_MASK GENMASK(24, 0)
+#define SOF_IPC4_GLB_EXT_CHAIN_DMA_FIFO_SIZE(x) (((x) << \
+ SOF_IPC4_GLB_EXT_CHAIN_DMA_FIFO_SIZE_SHIFT) & \
+ SOF_IPC4_GLB_EXT_CHAIN_DMA_FIFO_SIZE_MASK)
+
enum sof_ipc4_channel_config {
/* one channel only. */
SOF_IPC4_CHANNEL_CONFIG_MONO,
--
2.40.0
next prev parent reply other threads:[~2023-03-22 14:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-22 13:59 [PATCH v2 0/3] ASoC: SOF: ipc4/intel: Support for ChainDMA Peter Ujfalusi
2023-03-22 13:59 ` [PATCH v2 1/3] ASoC: SOF: topology: Set pipeline widget before updating IPC structures Peter Ujfalusi
2023-03-22 13:59 ` Peter Ujfalusi [this message]
2023-03-22 13:59 ` [PATCH v2 3/3] ASoC: SOF: ipc4/intel: Add support for chained DMA Peter Ujfalusi
2023-03-22 14:04 ` [PATCH v2 0/3] ASoC: SOF: ipc4/intel: Support for ChainDMA Mark Brown
2023-03-22 15:15 ` Sarha, Jyri
2023-03-22 15:27 ` Mark Brown
2023-03-23 7:13 ` Péter Ujfalusi
-- strict thread matches above, loose matches on Subject: below --
2023-03-22 13:58 Peter Ujfalusi
2023-03-22 13:58 ` [PATCH v2 2/3] ASoC: SOF: ipc4: Add macros for chain-dma message bits Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230322135927.7668-3-peter.ujfalusi@linux.intel.com \
--to=peter.ujfalusi@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=error27@gmail.com \
--cc=jyri.sarha@intel.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=lgirdwood@gmail.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=rander.wang@intel.com \
--cc=ranjani.sridharan@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox