alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Walker Chen <walker.chen@starfivetech.com>
To: Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Claudiu Beznea <Claudiu.Beznea@microchip.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor.dooley@microchip.com>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	Walker Chen <walker.chen@starfivetech.com>
Cc: <alsa-devel@alsa-project.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-riscv@lists.infradead.org>
Subject: [PATCH v4 3/3] riscv: dts: starfive: add the node and pins configuration for tdm
Date: Thu, 11 May 2023 17:15:49 +0800	[thread overview]
Message-ID: <20230511091549.28003-4-walker.chen@starfivetech.com> (raw)
In-Reply-To: <20230511091549.28003-1-walker.chen@starfivetech.com>

Add the tdm controller node and pins configuration of tdm for the
StarFive JH7110 SoC.

Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
---
 .../jh7110-starfive-visionfive-2.dtsi         | 40 +++++++++++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 21 ++++++++++
 2 files changed, 61 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 1155b97b593d..19b5954ee72d 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -214,6 +214,40 @@
 			slew-rate = <0>;
 		};
 	};
+
+	tdm0_pins: tdm0-pins {
+		tdm0-pins-tx {
+			pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <2>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		tdm0-pins-rx {
+			pinmux = <GPIOMUX(61, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_RXD)>;
+			input-enable;
+		};
+
+		tdm0-pins-sync {
+			pinmux = <GPIOMUX(63, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_SYNC)>;
+			input-enable;
+		};
+
+		tdm0-pins-pcmclk {
+			pinmux = <GPIOMUX(38, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_CLK)>;
+			input-enable;
+		};
+	};
 };
 
 &uart0 {
@@ -221,3 +255,9 @@
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
+
+&tdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tdm0_pins>;
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 866313570a7e..cfda6fb0d91b 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -366,6 +366,27 @@
 			status = "disabled";
 		};
 
+		tdm: tdm@10090000 {
+			compatible = "starfive,jh7110-tdm";
+			reg = <0x0 0x10090000 0x0 0x1000>;
+			clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>,
+				 <&syscrg JH7110_SYSCLK_TDM_APB>,
+				 <&syscrg JH7110_SYSCLK_TDM_INTERNAL>,
+				 <&syscrg JH7110_SYSCLK_TDM_TDM>,
+				 <&syscrg JH7110_SYSCLK_MCLK_INNER>,
+				 <&tdm_ext>;
+			clock-names = "tdm_ahb", "tdm_apb",
+				      "tdm_internal", "tdm",
+				      "mclk_inner", "tdm_ext";
+			resets = <&syscrg JH7110_SYSRST_TDM_AHB>,
+				 <&syscrg JH7110_SYSRST_TDM_APB>,
+				 <&syscrg JH7110_SYSRST_TDM_CORE>;
+			dmas = <&dma 20>, <&dma 21>;
+			dma-names = "rx","tx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
 		stgcrg: clock-controller@10230000 {
 			compatible = "starfive,jh7110-stgcrg";
 			reg = <0x0 0x10230000 0x0 0x10000>;
-- 
2.17.1


  parent reply	other threads:[~2023-05-11  9:23 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-11  9:15 [PATCH v4 0/3] Add TDM audio on StarFive JH7110 Walker Chen
2023-05-11  9:15 ` [PATCH v4 1/3] ASoC: dt-bindings: Add TDM controller bindings for " Walker Chen
2023-05-11  9:15 ` [PATCH v4 2/3] ASoC: starfive: Add JH7110 TDM driver Walker Chen
2023-05-15  8:29   ` Walker Chen
2023-05-15 10:51     ` Mark Brown
2023-05-15 12:47       ` Walker Chen
2023-05-17  8:35   ` Claudiu.Beznea
2023-05-24  8:20     ` Walker Chen
2023-05-11  9:15 ` Walker Chen [this message]
2023-05-15  8:44   ` [PATCH v4 3/3] riscv: dts: starfive: add the node and pins configuration for tdm Walker Chen
2023-05-15  8:58     ` Conor Dooley
2023-05-15 11:20       ` Mark Brown
2023-05-15 12:36       ` Walker Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230511091549.28003-4-walker.chen@starfivetech.com \
    --to=walker.chen@starfivetech.com \
    --cc=Claudiu.Beznea@microchip.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=conor.dooley@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=emil.renner.berthing@canonical.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).