Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Herve Codina <herve.codina@bootlin.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
	Christophe Leroy <christophe.leroy@csgroup.eu>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: Re: [PATCH v5 10/13] iio: inkern: Add a helper to query an available minimum raw value
Date: Sat, 17 Jun 2023 18:47:56 +0100	[thread overview]
Message-ID: <20230617184756.4062daa9@jic23-huawei> (raw)
In-Reply-To: <20230615152631.224529-11-herve.codina@bootlin.com>

On Thu, 15 Jun 2023 17:26:28 +0200
Herve Codina <herve.codina@bootlin.com> wrote:

> A helper, iio_read_max_channel_raw() exists to read the available
> maximum raw value of a channel but nothing similar exists to read the
> available minimum raw value.
> 
> This new helper, iio_read_min_channel_raw(), fills the hole and can be
> used for reading the available minimum raw value of a channel.
> It is fully based on the existing iio_read_max_channel_raw().
> 
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
LGTM
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> ---
>  drivers/iio/inkern.c         | 63 ++++++++++++++++++++++++++++++++++++
>  include/linux/iio/consumer.h | 12 +++++++
>  2 files changed, 75 insertions(+)
> 
> diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
> index 19ddd77adb11..7a1f6713318a 100644
> --- a/drivers/iio/inkern.c
> +++ b/drivers/iio/inkern.c
> @@ -909,6 +909,69 @@ int iio_read_max_channel_raw(struct iio_channel *chan, int *val)
>  }
>  EXPORT_SYMBOL_GPL(iio_read_max_channel_raw);
>  
> +static int iio_channel_read_min(struct iio_channel *chan,
> +				int *val, int *val2, int *type,
> +				enum iio_chan_info_enum info)
> +{
> +	const int *vals;
> +	int length;
> +	int ret;
> +
> +	ret = iio_channel_read_avail(chan, &vals, type, &length, info);
> +	if (ret < 0)
> +		return ret;
> +
> +	switch (ret) {
> +	case IIO_AVAIL_RANGE:
> +		switch (*type) {
> +		case IIO_VAL_INT:
> +			*val = vals[0];
> +			break;
> +		default:
> +			*val = vals[0];
> +			if (val2)
> +				*val2 = vals[1];
> +		}
> +		return 0;
> +
> +	case IIO_AVAIL_LIST:
> +		if (length <= 0)
> +			return -EINVAL;
> +		switch (*type) {
> +		case IIO_VAL_INT:
> +			*val = min_array(vals, length);
> +			break;
> +		default:
> +			/* TODO: learn about min for other iio values */
> +			return -EINVAL;
> +		}
> +		return 0;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +int iio_read_min_channel_raw(struct iio_channel *chan, int *val)
> +{
> +	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(chan->indio_dev);
> +	int ret;
> +	int type;
> +
> +	mutex_lock(&iio_dev_opaque->info_exist_lock);
> +	if (!chan->indio_dev->info) {
> +		ret = -ENODEV;
> +		goto err_unlock;
> +	}
> +
> +	ret = iio_channel_read_min(chan, val, NULL, &type, IIO_CHAN_INFO_RAW);
> +err_unlock:
> +	mutex_unlock(&iio_dev_opaque->info_exist_lock);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(iio_read_min_channel_raw);
> +
>  int iio_get_channel_type(struct iio_channel *chan, enum iio_chan_type *type)
>  {
>  	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(chan->indio_dev);
> diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
> index f536820b9cf2..e9910b41d48e 100644
> --- a/include/linux/iio/consumer.h
> +++ b/include/linux/iio/consumer.h
> @@ -301,6 +301,18 @@ int iio_write_channel_raw(struct iio_channel *chan, int val);
>   */
>  int iio_read_max_channel_raw(struct iio_channel *chan, int *val);
>  
> +/**
> + * iio_read_min_channel_raw() - read minimum available raw value from a given
> + *				channel, i.e. the minimum possible value.
> + * @chan:		The channel being queried.
> + * @val:		Value read back.
> + *
> + * Note, if standard units are required, raw reads from iio channels
> + * need the offset (default 0) and scale (default 1) to be applied
> + * as (raw + offset) * scale.
> + */
> +int iio_read_min_channel_raw(struct iio_channel *chan, int *val);
> +
>  /**
>   * iio_read_avail_channel_raw() - read available raw values from a given channel
>   * @chan:		The channel being queried.


  reply	other threads:[~2023-06-17 17:49 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-15 15:26 [PATCH v5 00/13] Add support for IIO devices in ASoC Herve Codina
2023-06-15 15:26 ` [PATCH v5 01/13] ASoC: dt-bindings: Add audio-iio-aux Herve Codina
2023-06-17 17:37   ` Jonathan Cameron
2023-06-20 16:37   ` Rob Herring
2023-06-15 15:26 ` [PATCH v5 02/13] ASoC: dt-bindings: simple-card: Add additional-devs subnode Herve Codina
2023-06-17 17:39   ` Jonathan Cameron
2023-06-20 16:45   ` Rob Herring
2023-06-21  8:06     ` Herve Codina
2023-06-15 15:26 ` [PATCH v5 03/13] iio: inkern: Check error explicitly in iio_channel_read_max() Herve Codina
2023-06-15 15:26 ` [PATCH v5 04/13] iio: consumer.h: Fix raw values documentation notes Herve Codina
2023-06-15 15:26 ` [PATCH v5 05/13] iio: inkern: Remove the 'unused' variable usage in iio_channel_read_max() Herve Codina
2023-06-17 17:42   ` Jonathan Cameron
2023-06-15 15:26 ` [PATCH v5 06/13] iio: inkern: Fix headers inclusion order Herve Codina
2023-06-17 17:43   ` Jonathan Cameron
2023-06-15 15:26 ` [PATCH v5 07/13] minmax: Introduce {min,max}_array() Herve Codina
2023-06-15 16:08   ` Andy Shevchenko
2023-06-20 11:45   ` David Laight
2023-06-22 12:32     ` Herve Codina
2023-06-22 12:37       ` Mark Brown
2023-06-22 14:08       ` Andy Shevchenko
2023-06-15 15:26 ` [PATCH v5 08/13] iio: inkern: Use max_array() to get the maximum value from an array Herve Codina
2023-06-17 17:45   ` Jonathan Cameron
2023-06-15 15:26 ` [PATCH v5 09/13] iio: inkern: Replace a FIXME comment by a TODO one Herve Codina
2023-06-17 17:46   ` Jonathan Cameron
2023-06-15 15:26 ` [PATCH v5 10/13] iio: inkern: Add a helper to query an available minimum raw value Herve Codina
2023-06-17 17:47   ` Jonathan Cameron [this message]
2023-06-15 15:26 ` [PATCH v5 11/13] ASoC: soc-dapm.h: Convert macros to return a compound literal Herve Codina
2023-06-15 15:26 ` [PATCH v5 12/13] ASoC: codecs: Add support for the generic IIO auxiliary devices Herve Codina
2023-06-17 18:01   ` Jonathan Cameron
2023-06-15 15:26 ` [PATCH v5 13/13] ASoC: simple-card: Handle additional devices Herve Codina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230617184756.4062daa9@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=broonie@kernel.org \
    --cc=christophe.leroy@csgroup.eu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=herve.codina@bootlin.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=lars@metafoo.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox