Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Binding <sbinding@opensource.cirrus.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
	<patches@opensource.cirrus.com>,
	Stefan Binding <sbinding@opensource.cirrus.com>
Subject: [PATCH v1] ALSA: hda: cs35l41: Override the _DSD for HP Zbook Fury 17 G9 to correct boost type
Date: Wed, 23 Aug 2023 15:39:56 +0100	[thread overview]
Message-ID: <20230823143956.755758-1-sbinding@opensource.cirrus.com> (raw)

CS35L41 HDA driver requires ACPI to contain correct _DSD properties to
correctly configure the device. Whilst the HP Zbook Fury 17 G9 contains
valid _DSD properties, the boost type has been configured incorrectly
in the _DSD for this laptop. We can override these properties to fix
the boost type.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
 sound/pci/hda/cs35l41_hda_property.c | 32 ++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
index 9b5a1d61575e..b62a4e6968e2 100644
--- a/sound/pci/hda/cs35l41_hda_property.c
+++ b/sound/pci/hda/cs35l41_hda_property.c
@@ -43,6 +43,37 @@ static int lenovo_legion_no_acpi(struct cs35l41_hda *cs35l41, struct device *phy
 	return 0;
 }
 
+/*
+ * Device 103C89C6 does have _DSD, however it is setup to use the wrong boost type.
+ * We can override the _DSD to correct the boost type here.
+ * Since this laptop has valid ACPI, we do not need to handle cs-gpios, since that already exists
+ * in the ACPI.
+ */
+static int hp_vision_acpi_fix(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
+			      const char *hid)
+{
+	struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
+
+	dev_info(cs35l41->dev, "Adding DSD properties for %s\n", cs35l41->acpi_subsystem_id);
+
+	cs35l41->index = id;
+	cs35l41->channel_index = 0;
+	cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 1, GPIOD_OUT_HIGH);
+	cs35l41->speaker_id = -ENOENT;
+	hw_cfg->spk_pos = cs35l41->index ? 1 : 0; // right:left
+	hw_cfg->gpio1.func = CS35L41_NOT_USED;
+	hw_cfg->gpio1.valid = true;
+	hw_cfg->gpio2.func = CS35L41_INTERRUPT;
+	hw_cfg->gpio2.valid = true;
+	hw_cfg->bst_type = CS35L41_INT_BOOST;
+	hw_cfg->bst_ind = 1000;
+	hw_cfg->bst_ipk = 4500;
+	hw_cfg->bst_cap = 24;
+	hw_cfg->valid = true;
+
+	return 0;
+}
+
 struct cs35l41_prop_model {
 	const char *hid;
 	const char *ssid;
@@ -53,6 +84,7 @@ struct cs35l41_prop_model {
 static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
 	{ "CLSA0100", NULL, lenovo_legion_no_acpi },
 	{ "CLSA0101", NULL, lenovo_legion_no_acpi },
+	{ "CSC3551", "103C89C6", hp_vision_acpi_fix },
 	{}
 };
 
-- 
2.34.1


             reply	other threads:[~2023-08-23 14:41 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-23 14:39 Stefan Binding [this message]
2023-08-24  7:53 ` [PATCH v1] ALSA: hda: cs35l41: Override the _DSD for HP Zbook Fury 17 G9 to correct boost type Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230823143956.755758-1-sbinding@opensource.cirrus.com \
    --to=sbinding@opensource.cirrus.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox