From: Chancel Liu <chancel.liu@nxp.com>
To: lgirdwood@gmail.com, broonie@kernel.org, perex@perex.cz,
tiwai@suse.com, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org
Cc: Chancel Liu <chancel.liu@nxp.com>
Subject: [PATCH v2 1/1] ASoC: soc-pcm.c: Make sure DAI parameters cleared if the DAI becomes inactive
Date: Wed, 20 Sep 2023 23:36:21 +0800 [thread overview]
Message-ID: <20230920153621.711373-2-chancel.liu@nxp.com> (raw)
In-Reply-To: <20230920153621.711373-1-chancel.liu@nxp.com>
The commit 1da681e52853 ("ASoC: soc-pcm.c: Clear DAIs parameters after
stream_active is updated") tries to make sure DAI parameters can be
cleared properly through moving the cleanup to the place where stream
active status is updated. However, it will cause the cleanup only
happening in soc_pcm_close().
Suppose a case: aplay -Dhw:0 44100.wav 48000.wav. The case calls
soc_pcm_open()->soc_pcm_hw_params()->soc_pcm_hw_free()->
soc_pcm_hw_params()->soc_pcm_hw_free()->soc_pcm_close() in order. The
parameters would be remained in the system even if the playback of
44100.wav is finished.
The case requires us clearing parameters in phase of soc_pcm_hw_free().
However, moving the DAI parameters cleanup back to soc_pcm_hw_free()
has the risk that DAIs parameters never be cleared if there're more
than one stream, see commit 1da681e52853 ("ASoC: soc-pcm.c: Clear DAIs
parameters after stream_active is updated") for more details.
To meet all these requirements, in addition to do DAI parameters
cleanup in soc_pcm_hw_free(), also check it in soc_pcm_close() to make
sure DAI parameters cleared if the DAI becomes inactive.
Fixes: 1da681e52853 ("ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
---
sound/soc/soc-pcm.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 3aa6b988cb4b..6cf4cd667d03 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -698,14 +698,12 @@ static int soc_pcm_clean(struct snd_soc_pcm_runtime *rtd,
if (!rollback) {
snd_soc_runtime_deactivate(rtd, substream->stream);
- /* clear the corresponding DAIs parameters when going to be inactive */
- for_each_rtd_dais(rtd, i, dai) {
- if (snd_soc_dai_active(dai) == 0)
- soc_pcm_set_dai_params(dai, NULL);
- if (snd_soc_dai_stream_active(dai, substream->stream) == 0)
- snd_soc_dai_digital_mute(dai, 1, substream->stream);
- }
+ /* Make sure DAI parameters cleared if the DAI becomes inactive */
+ for_each_rtd_dais(rtd, i, dai)
+ if (snd_soc_dai_active(dai) == 0 &&
+ (dai->rate || dai->channels || dai->sample_bits))
+ soc_pcm_set_dai_params(dai, NULL);
}
for_each_rtd_dais(rtd, i, dai)
@@ -936,6 +934,15 @@ static int soc_pcm_hw_clean(struct snd_soc_pcm_runtime *rtd,
snd_soc_dpcm_mutex_assert_held(rtd);
+ /* clear the corresponding DAIs parameters when going to be inactive */
+ for_each_rtd_dais(rtd, i, dai) {
+ if (snd_soc_dai_active(dai) == 1)
+ soc_pcm_set_dai_params(dai, NULL);
+
+ if (snd_soc_dai_stream_active(dai, substream->stream) == 1)
+ snd_soc_dai_digital_mute(dai, 1, substream->stream);
+ }
+
/* run the stream event */
snd_soc_dapm_stream_stop(rtd, substream->stream);
--
2.25.1
next prev parent reply other threads:[~2023-09-20 15:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-20 15:36 [PATCH v2 0/1] ASoC: soc-pcm.c: Make sure DAI parameters cleared if the DAI becomes inactive Chancel Liu
2023-09-20 15:36 ` Chancel Liu [this message]
2023-11-27 8:29 ` [PATCH v2 1/1] " Johan Hovold
2023-09-27 9:31 ` [PATCH v2 0/1] " Mark Brown
2023-09-28 8:35 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230920153621.711373-2-chancel.liu@nxp.com \
--to=chancel.liu@nxp.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).