From: Linus Walleij <linus.walleij@linaro.org>
To: Tony Lindgren <tony@atomide.com>,
Peter Ujfalusi <peter.ujfalusi@gmail.com>,
Jarkko Nikula <jarkko.nikula@bitmer.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
alsa-devel@alsa-project.org,
Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH 2/5] ASoC: ti: Convert RX51 to use exclusively GPIO descriptors
Date: Tue, 26 Sep 2023 15:25:30 +0200 [thread overview]
Message-ID: <20230926-descriptors-asoc-ti-v1-2-60cf4f8adbc5@linaro.org> (raw)
In-Reply-To: <20230926-descriptors-asoc-ti-v1-0-60cf4f8adbc5@linaro.org>
The RX51/Nokia n900 uses the legacy GPIO header to convert a GPIO
back to the global GPIO numberspace and then the jack using it
in the snd_soc_jack_add_gpios() call immediately looks up the
corresponding descriptor again.
The snd_soc_jack_add_gpios() handles GPIOs passed with devices
just fine: pass in the device instead, and rename the GPIO
to match the property in the device tree, and it should work
all the same but without all the trouble.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
sound/soc/ti/rx51.c | 19 ++++---------------
1 file changed, 4 insertions(+), 15 deletions(-)
diff --git a/sound/soc/ti/rx51.c b/sound/soc/ti/rx51.c
index 322c398d209b..047f852c79a9 100644
--- a/sound/soc/ti/rx51.c
+++ b/sound/soc/ti/rx51.c
@@ -10,7 +10,6 @@
*/
#include <linux/delay.h>
-#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
@@ -33,7 +32,6 @@ enum {
struct rx51_audio_pdata {
struct gpio_desc *tvout_selection_gpio;
- struct gpio_desc *jack_detection_gpio;
struct gpio_desc *eci_sw_gpio;
struct gpio_desc *speaker_amp_gpio;
};
@@ -198,7 +196,7 @@ static struct snd_soc_jack rx51_av_jack;
static struct snd_soc_jack_gpio rx51_av_jack_gpios[] = {
{
- .name = "avdet-gpio",
+ .name = "jack-detection",
.report = SND_JACK_HEADSET,
.invert = 1,
.debounce_time = 200,
@@ -263,7 +261,6 @@ static const struct snd_kcontrol_new aic34_rx51_controls[] = {
static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_card *card = rtd->card;
- struct rx51_audio_pdata *pdata = snd_soc_card_get_drvdata(card);
int err;
snd_soc_limit_volume(card, "TPA6130A2 Headphone Playback Volume", 42);
@@ -283,9 +280,9 @@ static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
return err;
}
- /* prepare gpio for snd_soc_jack_add_gpios */
- rx51_av_jack_gpios[0].gpio = desc_to_gpio(pdata->jack_detection_gpio);
- devm_gpiod_put(card->dev, pdata->jack_detection_gpio);
+ rx51_av_jack_gpios[0].gpiod_dev = card->dev;
+ /* Name is assigned in the struct */
+ rx51_av_jack_gpios[0].idx = 0;
err = snd_soc_jack_add_gpios(&rx51_av_jack,
ARRAY_SIZE(rx51_av_jack_gpios),
@@ -425,14 +422,6 @@ static int rx51_soc_probe(struct platform_device *pdev)
return PTR_ERR(pdata->tvout_selection_gpio);
}
- pdata->jack_detection_gpio = devm_gpiod_get(card->dev,
- "jack-detection",
- GPIOD_ASIS);
- if (IS_ERR(pdata->jack_detection_gpio)) {
- dev_err(card->dev, "could not get jack detection gpio\n");
- return PTR_ERR(pdata->jack_detection_gpio);
- }
-
pdata->eci_sw_gpio = devm_gpiod_get(card->dev, "eci-switch",
GPIOD_OUT_HIGH);
if (IS_ERR(pdata->eci_sw_gpio)) {
--
2.34.1
next prev parent reply other threads:[~2023-09-26 13:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-26 13:25 [PATCH 0/5] GPIO descriptors for TI ASoC codecs Linus Walleij
2023-09-26 13:25 ` [PATCH 1/5] ASoC: ti: Convert N810 ASoC to GPIO descriptors Linus Walleij
2023-09-26 13:25 ` Linus Walleij [this message]
2023-10-01 17:48 ` [PATCH 2/5] ASoC: ti: Convert RX51 to use exclusively " Jarkko Nikula
2023-09-26 13:25 ` [PATCH 3/5] ASoC: ti: Convert TWL4030 to use " Linus Walleij
2023-09-26 13:25 ` [PATCH 4/5] ASoC: ti: Convert Pandora ASoC to " Linus Walleij
2023-09-26 13:25 ` [PATCH 5/5] ASoC: ti: osk5912: Drop unused include Linus Walleij
2023-10-01 17:49 ` [PATCH 0/5] GPIO descriptors for TI ASoC codecs Jarkko Nikula
2023-10-02 11:45 ` Mark Brown
2023-10-02 16:04 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230926-descriptors-asoc-ti-v1-2-60cf4f8adbc5@linaro.org \
--to=linus.walleij@linaro.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=jarkko.nikula@bitmer.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=perex@perex.cz \
--cc=peter.ujfalusi@gmail.com \
--cc=tiwai@suse.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).