From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Cezary Rojewski <cezary.rojewski@intel.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
Liam Girdwood <liam.r.girdwood@linux.intel.com>,
Peter Ujfalusi <peter.ujfalusi@linux.intel.com>,
Bard Liao <yung-chuan.liao@linux.intel.com>,
Ranjani Sridharan <ranjani.sridharan@linux.intel.com>,
Kai Vehmanen <kai.vehmanen@linux.intel.com>,
Mark Brown <broonie@kernel.org>,
Daniel Baluta <daniel.baluta@nxp.com>,
linux-kernel@vger.kernel.org,
sound-open-firmware@alsa-project.org
Subject: [PATCH v5 06/12] ALSA: hda/i915: Add an allow_modprobe argument to snd_hdac_i915_init
Date: Fri, 29 Sep 2023 16:51:20 +0200 [thread overview]
Message-ID: <20230929145123.233838-7-maarten.lankhorst@linux.intel.com> (raw)
In-Reply-To: <20230929145123.233838-1-maarten.lankhorst@linux.intel.com>
Xe is a new GPU driver that re-uses the display (and sound) code from
i915. It's no longer possible to load i915, as the GPU can be driven
by the xe driver instead.
The new behavior will return -EPROBE_DEFER, and wait for a compatible
driver to be loaded instead of modprobing i915.
Converting all drivers at the same time is a lot of work, instead we
will convert each user one by one.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
include/sound/hda_i915.h | 4 ++--
sound/hda/hdac_i915.c | 8 ++++----
sound/pci/hda/hda_intel.c | 2 +-
sound/soc/intel/avs/core.c | 2 +-
sound/soc/intel/skylake/skl.c | 2 +-
sound/soc/sof/intel/hda-codec.c | 2 +-
6 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/include/sound/hda_i915.h b/include/sound/hda_i915.h
index 6b79614a893b9..f91bd66360865 100644
--- a/include/sound/hda_i915.h
+++ b/include/sound/hda_i915.h
@@ -9,12 +9,12 @@
#ifdef CONFIG_SND_HDA_I915
void snd_hdac_i915_set_bclk(struct hdac_bus *bus);
-int snd_hdac_i915_init(struct hdac_bus *bus);
+int snd_hdac_i915_init(struct hdac_bus *bus, bool allow_modprobe);
#else
static inline void snd_hdac_i915_set_bclk(struct hdac_bus *bus)
{
}
-static inline int snd_hdac_i915_init(struct hdac_bus *bus)
+static inline int snd_hdac_i915_init(struct hdac_bus *bus, bool allow_modprobe)
{
return -ENODEV;
}
diff --git a/sound/hda/hdac_i915.c b/sound/hda/hdac_i915.c
index a4a712c795c3d..ffa35d7a367c0 100644
--- a/sound/hda/hdac_i915.c
+++ b/sound/hda/hdac_i915.c
@@ -155,7 +155,7 @@ static int i915_gfx_present(struct pci_dev *hdac_pci)
*
* Returns zero for success or a negative error code.
*/
-int snd_hdac_i915_init(struct hdac_bus *bus)
+int snd_hdac_i915_init(struct hdac_bus *bus, bool allow_modprobe)
{
struct drm_audio_component *acomp;
int err;
@@ -171,7 +171,7 @@ int snd_hdac_i915_init(struct hdac_bus *bus)
acomp = bus->audio_component;
if (!acomp)
return -ENODEV;
- if (!acomp->ops) {
+ if (allow_modprobe && !acomp->ops) {
if (!IS_ENABLED(CONFIG_MODULES) ||
!request_module("i915")) {
/* 60s timeout */
@@ -180,9 +180,9 @@ int snd_hdac_i915_init(struct hdac_bus *bus)
}
}
if (!acomp->ops) {
- dev_info(bus->dev, "couldn't bind with audio component\n");
+ int err = allow_modprobe ? -ENODEV : -EPROBE_DEFER;
snd_hdac_acomp_exit(bus);
- return -ENODEV;
+ return dev_err_probe(bus->dev, err, "couldn't bind with audio component\n");
}
return 0;
}
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index b4ac0d43c09bc..bfe6232bb0e0e 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2266,7 +2266,7 @@ static int azx_probe_continue(struct azx *chip)
/* bind with i915 if needed */
if (chip->driver_caps & AZX_DCAPS_I915_COMPONENT) {
- err = snd_hdac_i915_init(bus);
+ err = snd_hdac_i915_init(bus, true);
if (err < 0) {
/* if the controller is bound only with HDMI/DP
* (for HSW and BDW), we need to abort the probe;
diff --git a/sound/soc/intel/avs/core.c b/sound/soc/intel/avs/core.c
index 859b217fc761b..bbb40339c75f4 100644
--- a/sound/soc/intel/avs/core.c
+++ b/sound/soc/intel/avs/core.c
@@ -191,7 +191,7 @@ static void avs_hda_probe_work(struct work_struct *work)
pm_runtime_set_active(bus->dev); /* clear runtime_error flag */
- ret = snd_hdac_i915_init(bus);
+ ret = snd_hdac_i915_init(bus, true);
if (ret < 0)
dev_info(bus->dev, "i915 init unsuccessful: %d\n", ret);
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index 77408a981b977..4f7acb4f6680b 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -791,7 +791,7 @@ static int skl_i915_init(struct hdac_bus *bus)
* The HDMI codec is in GPU so we need to ensure that it is powered
* up and ready for probe
*/
- err = snd_hdac_i915_init(bus);
+ err = snd_hdac_i915_init(bus, true);
if (err < 0)
return err;
diff --git a/sound/soc/sof/intel/hda-codec.c b/sound/soc/sof/intel/hda-codec.c
index 8a5e99a898ecb..f1fd5b44aaac9 100644
--- a/sound/soc/sof/intel/hda-codec.c
+++ b/sound/soc/sof/intel/hda-codec.c
@@ -415,7 +415,7 @@ int hda_codec_i915_init(struct snd_sof_dev *sdev)
return 0;
/* i915 exposes a HDA codec for HDMI audio */
- ret = snd_hdac_i915_init(bus);
+ ret = snd_hdac_i915_init(bus, true);
if (ret < 0)
return ret;
--
2.39.2
next prev parent reply other threads:[~2023-09-30 8:18 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-29 14:51 [PATCH v5 00/12] sound: Use -EPROBE_DEFER instead of i915 module loading Maarten Lankhorst
2023-09-29 14:51 ` [PATCH v5 01/12] ASoC/SOF/core: Ensure sof_ops_free() is still called when probe never ran Maarten Lankhorst
2023-09-29 15:25 ` Mark Brown
2023-09-29 14:51 ` [PATCH v5 02/12] ASoC: SOF: core: Add probe_early and remove_late callbacks Maarten Lankhorst
2023-09-29 15:26 ` Mark Brown
2023-09-29 14:51 ` [PATCH v5 03/12] ASoC: SOF: Intel: hda: start splitting the probe Maarten Lankhorst
2023-09-29 15:26 ` Mark Brown
2023-09-29 14:51 ` [PATCH v5 04/12] ALSA: hda/intel: Fix error handling in azx_probe() Maarten Lankhorst
2023-09-29 14:51 ` [PATCH v5 05/12] ALSA: hda/i915: Allow override of gpu binding Maarten Lankhorst
2023-09-29 14:51 ` Maarten Lankhorst [this message]
2023-09-29 14:51 ` [PATCH v5 07/12] ALSA: hda/i915: Allow xe as match for i915_component_master_match Maarten Lankhorst
2023-09-29 14:51 ` [PATCH v5 08/12] ASoC: Intel: avs: Move snd_hdac_i915_init to before probe_work Maarten Lankhorst
2023-09-29 14:51 ` [PATCH v5 09/12] ALSA: hda/intel: " Maarten Lankhorst
2023-09-29 15:25 ` [PATCH v5 00/12] sound: Use -EPROBE_DEFER instead of i915 module loading Mark Brown
2023-10-02 16:52 ` [PATCH v5 10/12] ASoC: Intel: Skylake: Move snd_hdac_i915_init to before probe_work Maarten Lankhorst
2023-10-03 6:55 ` Amadeusz Sławiński
2023-10-03 7:15 ` Amadeusz Sławiński
2023-10-02 16:52 ` [PATCH v5 11/12] ASoC: SOF: Intel: Move binding to display driver outside of deferred probe Maarten Lankhorst
2023-10-02 16:52 ` [PATCH v5 12/12] ALSA: hda/i915: Remove extra argument from snd_hdac_i915_init Maarten Lankhorst
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230929145123.233838-7-maarten.lankhorst@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=cezary.rojewski@intel.com \
--cc=daniel.baluta@nxp.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=liam.r.girdwood@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=peter.ujfalusi@linux.intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
--cc=sound-open-firmware@alsa-project.org \
--cc=tiwai@suse.com \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).