From: Takashi Sakamoto <o-takashi@sakamocchi.jp>
To: tiwai@suse.de
Cc: alsa-devel@alsa-project.org, m.armsby@gmx.de
Subject: Re: [PATCH] ALSA: firewire-motu: add support for MOTU 896 mk3 FireWire and Hybrid
Date: Mon, 29 Jan 2024 11:19:50 +0900 [thread overview]
Message-ID: <20240129021950.GA253990@workstation.local> (raw)
In-Reply-To: <20240128122523.247084-1-o-takashi@sakamocchi.jp>
Hi,
I found some mistakes in the statements of the patch comment, and forgot
to modify Kconfig. let me post take 2 so please abandon this patch,
sorry...
On Sun, Jan 28, 2024 at 09:25:23PM +0900, Takashi Sakamoto wrote:
> Mark of the Unicorn released 896 mk3 FireWire in 2008 as part of the third
> generation of its FireWire series. In 2011, 896 mk3 hybrid was released to
> support USB protocol.
>
> It supports sampling transfer frequency up to 192.0 kHz. The packet
> format differs depending on both of current sampling transfer frequency
> and the type of signal in optical interfaces. The model supports
> transmission of PCM frames as well as MIDI messages.
>
> The 896 mk3 FireWire consists of below ICs:
>
> * Texas Instruments TSB41AB2
> * Microchip (SMSC) USB3300
> * Xilinx Spartan-3A FPGA, XC3S500E
> * Texas Instruments TMS320C6722
> * Microchip (Atmel) AT91SAM SAM7S256
>
> It supports sampling transfer frequency up to 192.0 kHz. The packet
> format differs depending on both of current sampling transfer frequency
> and the type of signal in two pairs of optical interfaces. The model
> supports transmission of PCM frames, while has no port for MIDi messages.
>
> The model supports command mechanism to configure internal DSP. Hardware
> meter information is available in the first 2 chunks of each data block
> of tx packet.
>
> This commit adds support for it. The 896 mk3 FireWire is just tested, but
> the 896 mk3 Hybrid is not yet.
>
> $ config-rom-pretty-printer < motu-896mk3fw.img
> ROM header and bus information block
> -----------------------------------------------------------------
> 1024 04100ce1 bus_info_length 4, crc_length 16, crc 3297
> 1028 31333934 bus_name "1394"
> 1032 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
> 1036 0001f200 company_id 0001f2 |
> 1040 00093add device_id 0000604893 | EUI-64 0547556791237341
>
> root directory
> -----------------------------------------------------------------
> 1044 0004ef04 directory_length 4, crc 61188
> 1048 030001f2 vendor
> 1052 0c0083c0 node capabilities: per IEEE 1394
> 1056 d1000002 --> unit directory at 1064
> 1060 8d000005 --> eui-64 leaf at 1080
>
> unit directory at 1064
> -----------------------------------------------------------------
> 1064 0003998d directory_length 3, crc 39309
> 1068 120001f2 specifier id
> 1072 13000017 version
> 1076 17101800 model
>
> eui-64 leaf at 1080
> -----------------------------------------------------------------
> 1080 0002cc82 leaf_length 2, crc 52354
> 1084 0001f200 company_id 0001f2 |
> 1088 00093add device_id 0000604893 | EUI-64 0547556791237341
>
> $ config-rom-pretty-printer < motu-896mk3hybrid.img
> ROM header and bus information block
> -----------------------------------------------------------------
> 1024 04103cbe bus_info_length 4, crc_length 16, crc 15550
> 1028 31333934 bus_name "1394"
> 1032 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
> 1036 0001f200 company_id 0001f2 |
> 1040 000ae601 device_id 0000714241 | EUI-64 0547556791346689
>
> root directory
> -----------------------------------------------------------------
> 1044 0004ef04 directory_length 4, crc 61188
> 1048 030001f2 vendor
> 1052 0c0083c0 node capabilities: per IEEE 1394
> 1056 d1000002 --> unit directory at 1064
> 1060 8d000005 --> eui-64 leaf at 1080
>
> unit directory at 1064
> -----------------------------------------------------------------
> 1064 000394ac directory_length 3, crc 38060
> 1068 120001f2 specifier id
> 1072 13000037 version
> 1076 17102800 model
>
> eui-64 leaf at 1080
> -----------------------------------------------------------------
> 1080 0002cf69 leaf_length 2, crc 53097
> 1084 0001f200 company_id 0001f2 |
> 1088 000ae601 device_id 0000714241 | EUI-64 0547556791346689
>
> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
> ---
> sound/firewire/motu/motu-protocol-v3.c | 9 +++++++++
> sound/firewire/motu/motu.c | 2 ++
> sound/firewire/motu/motu.h | 1 +
> 3 files changed, 12 insertions(+)
>
> diff --git a/sound/firewire/motu/motu-protocol-v3.c b/sound/firewire/motu/motu-protocol-v3.c
> index 8a0426920a76..7254fdfe046a 100644
> --- a/sound/firewire/motu/motu-protocol-v3.c
> +++ b/sound/firewire/motu/motu-protocol-v3.c
> @@ -261,6 +261,7 @@ int snd_motu_protocol_v3_cache_packet_formats(struct snd_motu *motu)
>
> if (motu->spec == &snd_motu_spec_828mk3_fw ||
> motu->spec == &snd_motu_spec_828mk3_hybrid ||
> + motu->spec == &snd_motu_spec_896mk3 ||
> motu->spec == &snd_motu_spec_traveler_mk3 ||
> motu->spec == &snd_motu_spec_track16)
> return detect_packet_formats_with_opt_ifaces(motu, data);
> @@ -288,6 +289,14 @@ const struct snd_motu_spec snd_motu_spec_828mk3_hybrid = {
> .rx_fixed_pcm_chunks = {14, 14, 14}, // Additional 4 dummy chunks at higher rate.
> };
>
> +const struct snd_motu_spec snd_motu_spec_896mk3 = {
> + .name = "896mk3",
> + .protocol_version = SND_MOTU_PROTOCOL_V3,
> + .flags = SND_MOTU_SPEC_COMMAND_DSP,
> + .tx_fixed_pcm_chunks = {18, 14, 10},
> + .rx_fixed_pcm_chunks = {18, 14, 10},
> +};
> +
> const struct snd_motu_spec snd_motu_spec_traveler_mk3 = {
> .name = "TravelerMk3",
> .protocol_version = SND_MOTU_PROTOCOL_V3,
> diff --git a/sound/firewire/motu/motu.c b/sound/firewire/motu/motu.c
> index d73599eb7d5a..d14ab5dd5bea 100644
> --- a/sound/firewire/motu/motu.c
> +++ b/sound/firewire/motu/motu.c
> @@ -168,10 +168,12 @@ static const struct ieee1394_device_id motu_id_table[] = {
> SND_MOTU_DEV_ENTRY(0x00000d, &snd_motu_spec_ultralite),
> SND_MOTU_DEV_ENTRY(0x00000f, &snd_motu_spec_8pre),
> SND_MOTU_DEV_ENTRY(0x000015, &snd_motu_spec_828mk3_fw), // FireWire only.
> + SND_MOTU_DEV_ENTRY(0x000017, &snd_motu_spec_896mk3), // FireWire only.
> SND_MOTU_DEV_ENTRY(0x000019, &snd_motu_spec_ultralite_mk3), // FireWire only.
> SND_MOTU_DEV_ENTRY(0x00001b, &snd_motu_spec_traveler_mk3),
> SND_MOTU_DEV_ENTRY(0x000030, &snd_motu_spec_ultralite_mk3), // Hybrid.
> SND_MOTU_DEV_ENTRY(0x000035, &snd_motu_spec_828mk3_hybrid), // Hybrid.
> + SND_MOTU_DEV_ENTRY(0x000037, &snd_motu_spec_896mk3), // Hybrid.
> SND_MOTU_DEV_ENTRY(0x000033, &snd_motu_spec_audio_express),
> SND_MOTU_DEV_ENTRY(0x000039, &snd_motu_spec_track16),
> SND_MOTU_DEV_ENTRY(0x000045, &snd_motu_spec_4pre),
> diff --git a/sound/firewire/motu/motu.h b/sound/firewire/motu/motu.h
> index 3b1dc98a7be0..c66be0a89ccf 100644
> --- a/sound/firewire/motu/motu.h
> +++ b/sound/firewire/motu/motu.h
> @@ -138,6 +138,7 @@ extern const struct snd_motu_spec snd_motu_spec_8pre;
>
> extern const struct snd_motu_spec snd_motu_spec_828mk3_fw;
> extern const struct snd_motu_spec snd_motu_spec_828mk3_hybrid;
> +extern const struct snd_motu_spec snd_motu_spec_896mk3;
> extern const struct snd_motu_spec snd_motu_spec_traveler_mk3;
> extern const struct snd_motu_spec snd_motu_spec_ultralite_mk3;
> extern const struct snd_motu_spec snd_motu_spec_audio_express;
> --
> 2.40.1
Thanks
Takashi Sakamoto
prev parent reply other threads:[~2024-01-29 2:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-28 12:25 [PATCH] ALSA: firewire-motu: add support for MOTU 896 mk3 FireWire and Hybrid Takashi Sakamoto
2024-01-29 2:19 ` Takashi Sakamoto [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240129021950.GA253990@workstation.local \
--to=o-takashi@sakamocchi.jp \
--cc=alsa-devel@alsa-project.org \
--cc=m.armsby@gmx.de \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox