[PATCH v4 1/3] ALSA: hda/tas2781: Add tas2781 hda driver based on SPI

[Baojun Xu <baojun.xu@ti.com>]

Integrate tas2781 hda spi driver configs for HP (Varcolac).
Every tas2781 SPI node was added by serial-multi-instantie.c as a SPI device.
The code support Realtek as the primary codec.

Signed-off-by: Baojun Xu <baojun.xu@ti.com>

---
v4:
 - Add old hardware id "TIAS2781" for compatible with old production
 - Add 2 devices in struct smi_node tas2781_hda, to compatible with 4 AMPs
v3:
 - Move HID up to above /* Non-conforming _HID ... */ in scan.c,
   for avoid misunderstanding.
 - Move HID up to above /* Non-conforming _HID ... */ in
   serial-multi-instantiate.c, for avoid misunderstanding.
 - Change objs to y for snd-hda-scodec-tas2781-spi- in Makefile.
---
 drivers/acpi/scan.c                             |  2 ++
 drivers/platform/x86/serial-multi-instantiate.c | 13 +++++++++++++
 sound/pci/hda/Kconfig                           | 14 ++++++++++++++
 sound/pci/hda/Makefile                          |  2 ++
 sound/pci/hda/patch_realtek.c                   | 13 +++++++++++++
 5 files changed, 44 insertions(+)

diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index d1464324de95..51af181ccf62 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1765,6 +1765,8 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
 		{"CSC3557", },
 		{"INT33FE", },
 		{"INT3515", },
+		{"TXNW2781", },
+		{"TIAS2781", },
 		/* Non-conforming _HID for Cirrus Logic already released */
 		{"CLSA0100", },
 		{"CLSA0101", },
diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c
index 97b9c6392230..d1c766f17b26 100644
--- a/drivers/platform/x86/serial-multi-instantiate.c
+++ b/drivers/platform/x86/serial-multi-instantiate.c
@@ -368,6 +368,17 @@ static const struct smi_node cs35l57_hda = {
 	.bus_type = SMI_AUTO_DETECT,
 };
 
+static const struct smi_node tas2781_hda = {
+	.instances = {
+		{ "tas2781-hda", IRQ_RESOURCE_AUTO, 0 },
+		{ "tas2781-hda", IRQ_RESOURCE_AUTO, 0 },
+		{ "tas2781-hda", IRQ_RESOURCE_AUTO, 0 },
+		{ "tas2781-hda", IRQ_RESOURCE_AUTO, 0 },
+		{}
+	},
+	.bus_type = SMI_AUTO_DETECT,
+};
+
 /*
  * Note new device-ids must also be added to ignore_serial_bus_ids in
  * drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
@@ -380,6 +391,8 @@ static const struct acpi_device_id smi_acpi_ids[] = {
 	{ "CSC3556", (unsigned long)&cs35l56_hda },
 	{ "CSC3557", (unsigned long)&cs35l57_hda },
 	{ "INT3515", (unsigned long)&int3515_data },
+	{ "TXNW2781", (unsigned long)&tas2781_hda },
+	{ "TIAS2781", (unsigned long)&tas2781_hda },
 	/* Non-conforming _HID for Cirrus Logic already released */
 	{ "CLSA0100", (unsigned long)&cs35l41_hda },
 	{ "CLSA0101", (unsigned long)&cs35l41_hda },
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index f806636242ee..15f0e66b77e5 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -202,6 +202,20 @@ config SND_HDA_SCODEC_TAS2781_I2C
 comment "Set to Y if you want auto-loading the side codec driver"
 	depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_I2C=m
 
+config SND_HDA_SCODEC_TAS2781_SPI
+	tristate "Build TAS2781 HD-audio side codec support for SPI Bus"
+	depends on SPI_MASTER
+	depends on ACPI
+	depends on EFI
+	depends on SND_SOC
+	select CRC32_SARWATE
+	help
+	  Say Y or M here to include TAS2781 SPI HD-audio side codec support
+	  in snd-hda-intel driver, such as ALC287.
+
+comment "Set to Y if you want auto-loading the side codec driver"
+	depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_SPI=m
+
 config SND_HDA_CODEC_REALTEK
 	tristate "Build Realtek HD-audio codec support"
 	select SND_HDA_GENERIC
diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile
index 13e04e1f65de..2d5d4d841d87 100644
--- a/sound/pci/hda/Makefile
+++ b/sound/pci/hda/Makefile
@@ -39,6 +39,7 @@ snd-hda-scodec-cs35l56-spi-objs :=	cs35l56_hda_spi.o
 snd-hda-cs-dsp-ctls-objs :=		hda_cs_dsp_ctl.o
 snd-hda-scodec-component-objs :=	hda_component.o
 snd-hda-scodec-tas2781-i2c-objs :=	tas2781_hda_i2c.o
+snd-hda-scodec-tas2781-spi-y :=	tas2781_hda_spi.o tas2781_spi_fwlib.o
 
 # common driver
 obj-$(CONFIG_SND_HDA) := snd-hda-codec.o
@@ -70,6 +71,7 @@ obj-$(CONFIG_SND_HDA_SCODEC_CS35L56_SPI) += snd-hda-scodec-cs35l56-spi.o
 obj-$(CONFIG_SND_HDA_CS_DSP_CONTROLS) += snd-hda-cs-dsp-ctls.o
 obj-$(CONFIG_SND_HDA_SCODEC_COMPONENT) += snd-hda-scodec-component.o
 obj-$(CONFIG_SND_HDA_SCODEC_TAS2781_I2C) += snd-hda-scodec-tas2781-i2c.o
+obj-$(CONFIG_SND_HDA_SCODEC_TAS2781_SPI) += snd-hda-scodec-tas2781-spi.o
 
 # this must be the last entry after codec drivers;
 # otherwise the codec patches won't be hooked before the PCI probe
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 70d80b6af3fe..1070a1c0edec 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6913,6 +6913,11 @@ static void tas2781_fixup_i2c(struct hda_codec *cdc,
 	comp_generic_fixup(cdc, action, "i2c", "TIAS2781", "-%s:00", 1);
 }
 
+static void tas2781_fixup_spi_two(struct hda_codec *cdc, const struct hda_fixup *fix, int action)
+{
+	comp_generic_fixup(cdc, action, "spi", "TXNW2781", "-%s:00-tas2781-hda.%d", 2);
+}
+
 static void yoga7_14arb7_fixup_i2c(struct hda_codec *cdc,
 	const struct hda_fixup *fix, int action)
 {
@@ -7451,6 +7456,7 @@ enum {
 	ALC236_FIXUP_DELL_DUAL_CODECS,
 	ALC287_FIXUP_CS35L41_I2C_2_THINKPAD_ACPI,
 	ALC287_FIXUP_TAS2781_I2C,
+	ALC245_FIXUP_TAS2781_SPI_2_HP_GPIO_LED,
 	ALC287_FIXUP_YOGA7_14ARB7_I2C,
 	ALC245_FIXUP_HP_MUTE_LED_COEFBIT,
 	ALC245_FIXUP_HP_X360_MUTE_LEDS,
@@ -9618,6 +9624,12 @@ static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC285_FIXUP_THINKPAD_HEADSET_JACK,
 	},
+	[ALC245_FIXUP_TAS2781_SPI_2_HP_GPIO_LED] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = tas2781_fixup_spi_two,
+		.chained = true,
+		.chain_id = ALC285_FIXUP_HP_GPIO_LED,
+	},
 	[ALC287_FIXUP_YOGA7_14ARB7_I2C] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = yoga7_14arb7_fixup_i2c,
@@ -10074,6 +10086,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x8b8d, "HP", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8b8f, "HP", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8b92, "HP", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED),
+	SND_PCI_QUIRK(0x103c, 0x8b93, "HP", ALC245_FIXUP_TAS2781_SPI_2_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8b96, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
 	SND_PCI_QUIRK(0x103c, 0x8b97, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
 	SND_PCI_QUIRK(0x103c, 0x8bdd, "HP Envy 17", ALC287_FIXUP_CS35L41_I2C_2),
-- 
2.40.1