From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001389]: snd-ens1371 / es1938 Creative Ectiva silent playout + new line-in capture failure
Date: Tue, 13 Jun 2006 19:05:31 +0200 [thread overview]
Message-ID: <22252d1bc0e2aedd92e5fca0428b41ea@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1389>
======================================================================
Reported By: wood
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1389
Category: PCI - ens1371
Reproducibility: always
Severity: block
Priority: normal
Status: new
Distribution: Modified Redhat 9.0
Kernel Version: 2.4.24 self compiled
======================================================================
Date Submitted: 09-01-2005 20:32 CEST
Last Modified: 06-13-2006 19:05 CEST
======================================================================
Summary: snd-ens1371 / es1938 Creative Ectiva silent playout
+ new line-in capture failure
Description:
Soundcard: Creative Soundblaster PCI (Ectiva) Model:CT4730
Chip Label: Creative EV1938
Platform: Stable 2.4.24 Linux kernel on VIA MiniITX ME6000/M10000
w/ multiple soundcards. ALSA compiled from source
works with VIA motherboard Audio
and some other Creative PCI soundcards. Need a stable ALSA
driver
for this soundcard.
Problem:
The snd-ens1371 module loads correctly as 3rd sound device (First audio
device is VIA 8235 from motherboard, 2nd is PCSP).
Alsamixer -c 2 shows a reasonable set of
controls. Playout either with OSS emulation (play) or ALSA player
(aplay) plays WAV files but only silence for both 1.0.9 and 1.0.10rc1
releases.
On ALSA 1.0.9 codebase,the Master Volume does not always show in
alsamixer.
In 1.0.10rc1 it does always show.
ALSO:
On ALSA 1.0.9 code, the Line-In capture works under both OSS Emulation
and with ALSA arecord.
On the latest development release ALSA 1.0.10rc1, the Line-In
capture no longer works. So a new problem has been introduced from .9 to
.10.
Other info:
Native OSS driver es1371 works fine with this card. But I want to switch
to ALSA.
Earlier model Creative PCI128, Model CT4750 loads snd-ens1371 and
works fine with both tested ALSA releases using same platform
configuration.
Audigy 2 Value also works fine using snd-emu10k1 with same configuration
(I included this card info to rule out basic config problems).
======================================================================
----------------------------------------------------------------------
wood - 06-13-06 16:59
----------------------------------------------------------------------
Q.Do your CT4750 have 4 channels codec ?
Q. Do your CT4730 have 2 channels codec ?
Raymond,
I only have the CT4730.
How would I know if it has a 2 channel codec?
Tom
----------------------------------------------------------------------
Raymond - 06-13-06 19:05
----------------------------------------------------------------------
If your sound card support 4 channels, it usually has 4 color jacks :-
green,pink,blue and black jacks
It seem that your sound card have STAC970x stereo codec but
snd_ens1371_codec_read() unable to read correct value
Add two printk statements as described in
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2132#10150 to trace the
read/write of codec registers
Do you really have 3 ALSA sound drivers ?
cat /proc/asound/cards
Issue History
Date Modified Username Field Change
======================================================================
09-01-05 20:32 wood New Issue
09-01-05 20:32 wood Distribution => Modified Redhat 9.0
09-01-05 20:32 wood Kernel Version => 2.4.24 self compiled
06-13-06 05:06 Raymond Note Added: 0010186
06-13-06 06:43 wood Note Added: 0010188
06-13-06 07:05 Raymond Note Added: 0010189
06-13-06 07:28 Raymond Note Edited: 0010189
06-13-06 16:26 wood Note Added: 0010194
06-13-06 16:51 Raymond Note Added: 0010196
06-13-06 16:59 wood Note Added: 0010197
06-13-06 19:05 Raymond Note Added: 0010201
======================================================================
next reply other threads:[~2006-06-13 17:05 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-13 17:05 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-07-10 17:36 [ALSA - driver 0001389]: snd-ens1371 / es1938 Creative Ectiva silent playout + new line-in capture failure bugtrack
2006-07-10 16:14 bugtrack
2006-07-06 2:04 bugtrack
2006-06-14 12:42 bugtrack
2006-06-13 17:46 bugtrack
2006-06-13 14:59 bugtrack
2006-06-13 14:51 bugtrack
2006-06-13 14:26 bugtrack
2006-06-13 5:05 bugtrack
2006-06-13 4:43 bugtrack
2006-06-13 3:06 bugtrack
2005-09-01 18:32 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=22252d1bc0e2aedd92e5fca0428b41ea@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox