From: "Pan, Xiuli" <xiuli.pan@linux.intel.com>
To: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
Kirill Marinushkin <k.marinushkin@gmail.com>,
Mark Brown <broonie@kernel.org>, Takashi Iwai <tiwai@suse.de>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>,
alsa-devel@alsa-project.org
Subject: Re: [PATCH v2] ASoC: topology: Fix bclk and fsync inversion in set_link_hw_format()
Date: Thu, 15 Mar 2018 11:01:24 +0800 [thread overview]
Message-ID: <2617665f-f1eb-1129-d067-65a4551284e2@linux.intel.com> (raw)
In-Reply-To: <2f8b5ee2-78f4-8f2e-34cd-78b22c9ab2e8@linux.intel.com>
On 3/15/2018 02:37, Pierre-Louis Bossart wrote:
>
>
> On 03/14/2018 04:42 AM, Pan, Xiuli wrote:
>>
>>
>> On 3/14/2018 03:52, Kirill Marinushkin wrote:
>>> On 03/13/18 07:57, Pan, Xiuli wrote:
>>>>
>>>> On 3/1/2018 14:53, Kirill Marinushkin wrote:
>>>>> This patch is for alsa-lib. I forgot to mention it in the subject.
>>>>>
>>>>>
>>>>> On 03/01/18 07:48, Kirill Marinushkin wrote:
>>>>>> The values of bclk and fsync are inverted WRT the codec. But the
>>>>>> existing
>>>>>> solution already works for Broadwell, see the alsa-lib config:
>>>>>>
>>>>>> `alsa-lib/src/conf/topology/broadwell/broadwell.conf`
>>>>>>
>>>>>> This commit provides the backwards-compatible solution to fix
>>>>>> this misuse.
>>>>>> This commit goes in pair with the corresponding patch for linux.
>>>>>>
>>>>>> Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
>>>>>> Cc: Mark Brown <broonie@kernel.org>
>>>>>> Cc: Takashi Iwai <tiwai@suse.de>
>>>>>> Cc: Jaroslav Kysela <perex@perex.cz>
>>>>>> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
>>>>>> Cc: Pan Xiuli <xiuli.pan@linux.intel.com>
>>>>>> Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
>>>>>> Cc: alsa-devel@alsa-project.org
>>>>>> ---
>>>>>> include/sound/asoc.h | 16 ++++++++++++++--
>>>>>> include/topology.h | 4 ++--
>>>>>> src/conf/topology/broadwell/broadwell.conf | 4 ++--
>>>>>> src/topology/pcm.c | 30
>>>>>> ++++++++++++++++++++++++++----
>>>>>> 4 files changed, 44 insertions(+), 10 deletions(-)
>>>>>>
>>>>>> diff --git a/include/sound/asoc.h b/include/sound/asoc.h
>>>>>> index 0f5d9f9a..89b00703 100644
>>>>>> --- a/include/sound/asoc.h
>>>>>> +++ b/include/sound/asoc.h
>>>>>> @@ -156,6 +156,18 @@
>>>>>> #define SND_SOC_TPLG_LNK_FLGBIT_SYMMETRIC_SAMPLEBITS (1 << 2)
>>>>>> #define SND_SOC_TPLG_LNK_FLGBIT_VOICE_WAKEUP (1 << 3)
>>>>>> +/* DAI topology BCLK parameter
>>>>>> + * For the backwards capability, by default codec is bclk master
>>>>>> + */
>>>>>> +#define SND_SOC_TPLG_BCLK_CM 0 /* codec is bclk master */
>>>>>> +#define SND_SOC_TPLG_BCLK_CS 1 /* codec is bclk slave */
>>>>>> +
>>>>>> +/* DAI topology FSYNC parameter
>>>>>> + * For the backwards capability, by default codec is fsync master
>>>>>> + */
>>>>>> +#define SND_SOC_TPLG_FSYNC_CM 0 /* codec is fsync master */
>>>>>> +#define SND_SOC_TPLG_FSYNC_CS 1 /* codec is fsync slave */
>>>>>> +
>>>>>> /*
>>>> Could we keep this align with the old values.
>>>>
>>>> 1 for master of BCLK, 0 for slave
>>>> 1 for master of FSYNC, 0 for slave
>>> We cannot keep it aligned with the old *comment descriptions*,
>>> because we keep it aligned with the old *implementation*.
>>> As you remember, the whole issue was with the reverted values.
>>> We exactly keep our new solution aligned to the old solution by
>>> doing this:
>>
>> Yes, but what I suggest is that if we can not modify the kernel part.
>> But just use the value in alsatplg to fix this problem. We actually
>> not passed any string in the tplg file, but only some parsed value.
>> Could we align the string & value mapping to make this more easier.
>>
>> Though I know that the value for bclk_master ans fsync_master is very
>> confusing.
>
> Xiuli, I was not able to understand any of your points...
> Rule #1 is we don't break userspace. If people generated a .tplg file
> with an old version of alsatplg or an inversion in the .conf file,
> then we have to provide a backwards-compatible solution.
>
OK, I got the point. We must make enough changes for the old version
files to be accepted.
The SOF need some patches to work with these patches. I will send them
once these are merged in.
Thanks
Xiuli
>>
>>> ~~~~
>>> #define SND_SOC_TPLG_FSYNC_CM 0 /* codec is fsync master */
>>> #define SND_SOC_TPLG_FSYNC_CS 1 /* codec is fsync slave */
>>> ~~~~
>>>
>>>> This will save some change for SOF topology load parse to DSP.
>>>> Now we need to modify a few codes too fit this changing.
>>>>
>>> See above why we can't follow this proposal.
>>>
>>>> And to make things more easier. We can just keep the old values and
>>>> only modify alsa-lib to let "master" == "codec_slave".
>>>> Here we only need to change how we write tplg and no more kernel
>>>> patches are need.
>>>>
>>>>>> * Block Header.
>>>>>> * This header precedes all object and object arrays below.
>>>>>> @@ -311,8 +323,8 @@ struct snd_soc_tplg_hw_config {
>>>>>> __u8 clock_gated; /* 1 if clock can be gated to save
>>>>>> power */
>>>>>> __u8 invert_bclk; /* 1 for inverted BCLK, 0 for normal */
>>>>>> __u8 invert_fsync; /* 1 for inverted frame clock, 0 for
>>>>>> normal */
>>>>>> - __u8 bclk_master; /* 1 for master of BCLK, 0 for slave */
>>>>>> - __u8 fsync_master; /* 1 for master of FSYNC, 0 for slave */
>>>>>> + __u8 bclk_master; /* SND_SOC_TPLG_BCLK_ value */
>>>>>> + __u8 fsync_master; /* SND_SOC_TPLG_FSYNC_ value */
>>>>>> __u8 mclk_direction; /* 0 for input, 1 for output */
>>>>>> __le16 reserved; /* for 32bit alignment */
>>>>>> __le32 mclk_rate; /* MCLK or SYSCLK freqency in Hz */
>>>>>> diff --git a/include/topology.h b/include/topology.h
>>>>>> index 8779da4d..5d7b46df 100644
>>>>>> --- a/include/topology.h
>>>>>> +++ b/include/topology.h
>>>>>> @@ -1000,8 +1000,8 @@ struct snd_tplg_hw_config_template {
>>>>>> unsigned char clock_gated; /* 1 if clock can be gated
>>>>>> to save power */
>>>>>> unsigned char invert_bclk; /* 1 for inverted BCLK, 0
>>>>>> for normal */
>>>>>> unsigned char invert_fsync; /* 1 for inverted frame
>>>>>> clock, 0 for normal */
>>>>>> - unsigned char bclk_master; /* 1 for master of BCLK, 0
>>>>>> for slave */
>>>>>> - unsigned char fsync_master; /* 1 for master of FSYNC, 0
>>>>>> for slave */
>>>>>> + unsigned char bclk_master; /* SND_SOC_TPLG_BCLK_ value */
>>>>>> + unsigned char fsync_master; /* SND_SOC_TPLG_FSYNC_ value */
>>>>>> unsigned char mclk_direction; /* 0 for input, 1 for
>>>>>> output */
>>>>>> unsigned short reserved; /* for 32bit alignment */
>>>>>> unsigned int mclk_rate; /* MCLK or SYSCLK
>>>>>> freqency in Hz */
>>>>>> diff --git a/src/conf/topology/broadwell/broadwell.conf
>>>>>> b/src/conf/topology/broadwell/broadwell.conf
>>>>>> index b8405d93..09fc4daa 100644
>>>>>> --- a/src/conf/topology/broadwell/broadwell.conf
>>>>>> +++ b/src/conf/topology/broadwell/broadwell.conf
>>>>>> @@ -393,8 +393,8 @@ SectionGraph."dsp" {
>>>>>> SectionHWConfig."CodecHWConfig" {
>>>>>> id "1"
>>>>>> format "I2S" # physical audio format.
>>>>>> - bclk "master" # Platform is master of bit clock
>>>>>> - fsync "master" # platform is master of fsync
>>>>>> + bclk "codec_slave" # platform is master of bit clock
>>>>>> (codec is slave)
>>>>>> + fsync "codec_slave" # platform is master of fsync (codec
>>>>>> is slave)
>>>>>> }
>>>>>> SectionLink."Codec" {
>>>>>> diff --git a/src/topology/pcm.c b/src/topology/pcm.c
>>>>>> index 58cee31d..bdab8eef 100644
>>>>>> --- a/src/topology/pcm.c
>>>>>> +++ b/src/topology/pcm.c
>>>>>> @@ -1137,8 +1137,19 @@ int tplg_parse_hw_config(snd_tplg_t *tplg,
>>>>>> snd_config_t *cfg,
>>>>>> if (snd_config_get_string(n, &val) < 0)
>>>>>> return -EINVAL;
>>>>>> - if (!strcmp(val, "master"))
>>>>>> - hw_cfg->bclk_master = true;
>>>>>> + if (!strcmp(val, "master")) {
>>>>>> + /* For backwards capability,
>>>>>> + * "master" == "codec is slave"
>>>>>> + */
>>>>>> + SNDERR("warning: deprecated bclk value '%s'\n",
>>>>>> + val);
>>>>>> +
>>>>>> + hw_cfg->bclk_master = SND_SOC_TPLG_BCLK_CS;
>>>>>> + } else if (!strcmp(val, "codec_slave")) {
>>>>>> + hw_cfg->bclk_master = SND_SOC_TPLG_BCLK_CS;
>>>>>> + } else if (!strcmp(val, "codec_master")) {
>>>>>> + hw_cfg->bclk_master = SND_SOC_TPLG_BCLK_CM;
>>>>>> + }
>>>>>> continue;
>>>>>> }
>>>> What if some old tplg used "slave"? What should we do to those
>>>> values.
>>>>
>>> Old behavior: "slave" => not modified (hw_cfg->bclk_master = 0)
>>> New behavior: "slave" => not modified (hw_cfg->bclk_master = 0)
>>>
>>> So, we keep this use-case unchanged.
>>
>> What I worry about is that we have make hw_cfg->bclk_master usage
>> different in kernel part.
>> I think we should keep this the same now, the same 0 have different
>> meanings.
>> Otherwise, why should we check codec_master?
>>>>>> @@ -1163,8 +1174,19 @@ int tplg_parse_hw_config(snd_tplg_t
>>>>>> *tplg, snd_config_t *cfg,
>>>>>> if (snd_config_get_string(n, &val) < 0)
>>>>>> return -EINVAL;
>>>>>> - if (!strcmp(val, "master"))
>>>>>> - hw_cfg->fsync_master = true;
>>>>>> + if (!strcmp(val, "master")) {
>>>>>> + /* For backwards capability,
>>>>>> + * "master" == "codec is slave"
>>>>>> + */
>>>>>> + SNDERR("warning: deprecated fsync value '%s'\n",
>>>>>> + val);
>>>>>> +
>>>>>> + hw_cfg->fsync_master = SND_SOC_TPLG_FSYNC_CS;
>>>>>> + } else if (!strcmp(val, "codec_slave")) {
>>>>>> + hw_cfg->fsync_master = SND_SOC_TPLG_FSYNC_CS;
>>>>>> + } else if (!strcmp(val, "codec_master")) {
>>>>>> + hw_cfg->fsync_master = SND_SOC_TPLG_FSYNC_CM;
>>>>>> + }
>>>>>> continue;
>>>>>> }
>>>> Test with our SOF topology and found a missing part mclk.
>>>> We also use mclk now, and I think these KEY WORDS should align with
>>>> the new changes, too.
>>>>
>>> mclk is not related to this patch series. Feel free to add it in a
>>> separate patch.
>>
>> OK, we may add this support later.
>>
>> Thanks
>> Xiuli
>>
>>> Best Regards,
>>> Kirill
>>> _______________________________________________
>>> Alsa-devel mailing list
>>> Alsa-devel@alsa-project.org
>>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>>
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2018-03-15 3:01 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-01 6:45 [PATCH v2] ASoC: topology: Fix bclk and fsync inversion in set_link_hw_format() Kirill Marinushkin
2018-03-01 6:48 ` Kirill Marinushkin
2018-03-01 6:53 ` Kirill Marinushkin
2018-03-13 6:57 ` Pan, Xiuli
2018-03-13 19:52 ` Kirill Marinushkin
2018-03-14 9:42 ` Pan, Xiuli
2018-03-14 18:37 ` Pierre-Louis Bossart
2018-03-15 3:01 ` Pan, Xiuli [this message]
2018-03-19 6:25 ` Kirill Marinushkin
2018-03-26 18:51 ` Kirill Marinushkin
2018-03-26 22:53 ` Pierre-Louis Bossart
2018-03-27 7:18 ` Pan, Xiuli
2018-03-27 18:15 ` Pierre-Louis Bossart
2018-03-27 18:16 ` Pierre-Louis Bossart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2617665f-f1eb-1129-d067-65a4551284e2@linux.intel.com \
--to=xiuli.pan@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=k.marinushkin@gmail.com \
--cc=liam.r.girdwood@linux.intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).