alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: "mutenmaster@tiscali.it" <mutenmaster@tiscali.it>
To: alsa-devel@alsa-project.org
Subject: Re: snd_intel_hda : broken microphone
Date: Tue, 25 May 2010 20:08:41 +0200 (CEST)	[thread overview]
Message-ID: <26600671.238021274810921411.JavaMail.root@ps22> (raw)

[-- Attachment #1: Type: text/plain, Size: 32223 bytes --]

ok you can find attached my codec0 output data. I hope
this helps. if 

you or anyone else need any other piece of
info, please ask.

----

Messaggio originale----
	Apparently (I assume) this is not for all via 

sound chips so it's best
to expalin what your setup is. The output 
from 
lspci does not tell the
story on the codec at times. The best 
output is

from /proc/asound/card0/codec#0

On Wed, 2010-05-19 at 11:33 
+0200, 
mutenmaster@tiscali.it wrote:
> hello people,
> 
> i am really 

determined in letting you know, for the 
> third time,
> that my front 

mic input does not work. i do not know if the 
> rear
> one works, i 

suspect not, but it's not important, because
> before 
> the following 

commit, the front mic input worked:
> 
> $ sudo git bisect 
> bad
> 

f5271101faf1655d862849f42518c2a88ef394fb
> is the first bad commit
> 

> 
commit f5271101faf1655d862849f42518c2a88ef394fb
> 
> Author: Lydia 

Wang 
> <lydiawang@viatech.com.cn>
> Date:   Sat Oct 10 19:07:
> 35 

2009 +0800
> 
>     
> ALSA HDA VIA: Add VIA_CTL_WIDGET_ANALOG_MUTE
> 

control type
>    
>     Enter 
> low power state if AA-Path volume is 

muted.
> 
>    
>     Signed-off-by: 
> Lydia Wang <lydiawang@viatech.

com.cn>
>    
> Signed-off-by: Logan Li 
> <loganli@viatech.com.cn>


>     Signed-off-by:
> Takashi Iwai <tiwai@suse.
> de>
> 
> :040000 

040000
> ab1ae14ff67f0b08848faeb3ad68def7f3e727f0
> 
> 

0bfbfde11fe32e87e8edbdb3c4d03c2d30370393 M      sound
> 
> i'm 

copypasting 
> the lspci ouput, so that you can have a general idea
> 

of what kind of 
> machine i have. please let me know if there is
> 
any 
other info you need 
> to solve this bug.
> 
> more details on 
the 
problem:
> doing 
> $ arecord -f cd 
> test.wav
> 
> produces a 
file of 
44 bytes. it's as if no microphone is 
> attached
> to the 
jack. this 
behaviour has been evolving from the commit
> 
> i showed 
you forth. at 
the beginning, a file with actual data was
> 
> 
produced, but no audio 
came out of the speakers when reproducing
> 
it. 
> going on with the 
commits, the file became 44 bytes long.
> 
> 
yours,
> 
> vasilis
> 
> 
--
> 
> $ lspci -vvv
> 
> 00:00.0 Host 
bridge: Advanced Micro Devices 

> [AMD] RS780 Host Bridge Alternate
> 	
Subsystem: ASUSTeK Computer 
Inc. 
> Device 83a2
> 	Control: I/O- Mem+ 
BusMaster+ SpecCycle- 
MemWINV- 
> VGASnoop- ParErr- Stepping- SERR- 
FastB2B- DisINTx-
> 	
Status: Cap+ 
> 66MHz+ UDF- FastB2B- ParErr- 
DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ 
> >SERR- <PERR- INTx-
> 	
Latency: 0
> 	Capabilities: 
[c4] HyperTransport: 
> Slave or Primary 
Interface
> 		Command: 
BaseUnitID=0 UnitCnt=12 MastHost- 
> DefDir- 
DUL-
> 		Link Control 0: 
CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> 
<CRCErr=0 IsocEn+ LSEn- 
ExtCTL- 64b-
> 		Link Config 0: MLWI=16bit 
> 
DwFcIn- MLWO=16bit 
DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-

> 		
> Link Control 
1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ 
<CRCErr=0 
> IsocEn- LSEn- 
ExtCTL- 64b-
> 		Link Config 1: MLWI=8bit 
DwFcIn- MLWO=8bit 
> DwFcOut- 
LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-

> 		Revision ID: 3.00
> 		
> 
Link Frequency 0: [b]
> 		Link Error 0: 
<Prot- <Ovfl- <EOC- CTLTm-
> 		
Link 
> Frequency Capability 0: 200MHz+ 
300MHz- 400MHz+ 500MHz- 600MHz+ 
800MHz+ 
> 1.0GHz+ 1.2GHz- 1.4GHz- 1.6
GHz- Vend-
> 		Feature 
Capability: IsocFC- 
> LDTSTOP+ CRCTM- ECTLT- 
64bA- UIDRD-
> 		Link 
Frequency 1: 200MHz
> 		Link 
> Error 1: <Prot- 
<Ovfl- <EOC- CTLTm-
> 		
Link Frequency Capability 1: 
> 200MHz- 
300MHz- 400MHz- 500MHz- 600MHz- 
800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 
> 1.6
GHz- Vend-
> 		Error Handling: 
PFlE- OFlE- PFE- OFE- EOCFE- RFE- 
> 
CRCFE- SERRFE- CF- RE- PNFE- ONFE- 
EOCNFE- RNFE- CRCNFE- SERRNFE-
> 		

> Prefetchable memory behind bridge 
Upper: 00-00
> 		Bus Number: 00
> 	

> Capabilities: [54] 
HyperTransport: UnitID Clumping
> 	Capabilities: 
[40] 
> 
HyperTransport: Retry Mode
> 	Capabilities: [9c] 
HyperTransport: #1a
> 	

> Capabilities: [f8] HyperTransport: #1c
> 
> 
00:02.0 PCI bridge: 
Advanced 
> Micro Devices [AMD] RS780 PCI to PCI 
bridge (ext gfx port 
0) (prog-if 
> 00 [Normal decode])
> 	Control: 
I/O+ Mem+ BusMaster+ 
SpecCycle- MemWINV- 
> VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- 
DisINTx+
> 	Status: Cap+ 
> 66MHz- UDF- 
FastB2B- ParErr- DEVSEL=fast 
>TAbort- <TAbort- <MAbort- 
> >SERR- 
<PERR- INTx-
> 	Latency: 0, Cache 
Line Size: 64 bytes
> 	Bus: 
> 
primary=00, secondary=01, 
subordinate=01, sec-latency=0
> 	I/O behind 

> bridge: 0000d000-
0000dfff
> 	Memory behind bridge: fea00000-feafffff

> 	
> Prefetchable 
memory behind bridge: 00000000d0000000-
00000000dfffffff
> 	
> Secondary 
status: 66MHz- FastB2B- ParErr- 
DEVSEL=fast >TAbort- <TAbort- 
> 
<MAbort- <SERR- <PERR-
> 	BridgeCtl: 
Parity+ SERR+ NoISA- VGA+ MAbort- 

> >Reset- FastB2B-
> 		PriDiscTmr- 
SecDiscTmr- DiscTmrStat- 
DiscTmrSERREn-
> 	
> Capabilities: [50] Power 
Management version 3
> 		
Flags: PMEClk- DSI- D1- 
> D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,
D3cold+)
> 		Status: D0 PME-
> Enable- DSel=0 
DScale=0 PME-
> 	
Capabilities: [58] Express (v2) Root Port 
> (Slot+), 
MSI 00
> 		
DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency 
> L0s 
<64ns, L1 
<1us
> 			ExtTag+ RBE+ FLReset-
> 		DevCtl:	Report errors: 

> 
Correctable- Non-Fatal- Fatal- Unsupported-
> 			RlxdOrd+ ExtTag- 

> 
PhantFunc- AuxPwr- NoSnoop+
> 			MaxPayload 128 bytes, MaxReadReq 
128 

> bytes
> 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- 
AuxPwr- 
> 
TransPend-
> 		LnkCap:	Port #0, Speed 5GT/s, Width x16, 
ASPM L0s L1, 
> 
Latency L0 <64ns, L1 <1us
> 			ClockPM- Suprise- 
LLActRep+ BwNot+
> 		

> LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- 
Retrain- CommClk+
> 			

> ExtSynch- ClockPM- AutWidDis- BWInt- 
AutBWInt-
> 		LnkSta:	Speed 2.5
GT/s, 
> Width x16, TrErr- Train- 
SlotClk+ DLActive+ BWMgmt+ ABWMgmt-

> 		SltCap:	
> AttnBtn- PwrCtrl- 
MRL- AttnInd- PwrInd- HotPlug- 
Surpise-
> 			Slot #  2, 
> PowerLimit 
75.000000; Interlock- NoCompl+

> 		SltCtl:	Enable: AttnBtn- 
> PwrFlt- 
MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
> 			Control: AttnInd 
> 
Unknown, PwrInd Unknown, Power- 
Interlock-
> 		SltSta:	Status: 
AttnBtn- 
> PowerFlt- MRL- CmdCplt- 
PresDet+ Interlock-
> 			Changed: 
MRL- PresDet+ 
> LinkState+
> 		
RootCtl: ErrCorrectable- ErrNon-Fatal- 
ErrFatal- 
> PMEIntEna- 
CRSVisible-
> 		RootCap: CRSVisible-
> 		
RootSta: PME ReqID 
> 0000, 
PMEStatus- PMEPending-
> 		DevCap2: 
Completion Timeout: Not 
> 
Supported, TimeoutDis- ARIFwd-
> 		DevCtl2: 
Completion Timeout: 50us 
to 
> 50ms, TimeoutDis- ARIFwd-
> 		LnkCtl2: 
Target Link Speed: 5GT/s, 

> EnterCompliance- SpeedDis-, Selectable De-
emphasis: -3.5dB
> 			 
Transmit 
> Margin: Normal Operating Range, 
EnterModifiedCompliance- 
ComplianceSOS-
> 
> 			 Compliance De-
emphasis: -6dB
> 		LnkSta2: 
Current De-emphasis Level: 
> -3.5dB
> 	
Capabilities: [a0] Message 
Signalled Interrupts: Mask- 64bit- 
> 
Count=1/1 Enable+
> 		Address: 
fee0f00c  Data: 4159
> 	Capabilities: 
[b0] 
> Subsystem: ASUSTeK 
Computer Inc. Device 83a2
> 	Capabilities: 
[b8] 
> HyperTransport: MSI 
Mapping Enable+ Fixed+
> 	Capabilities: 
[100] Vendor 
> Specific 
Information <?>
> 	Capabilities: [110] 
Virtual Channel <?>
> 	
> Kernel 
driver in use: pcieport-driver
> 
> 
00:0a.0 PCI bridge: Advanced 
> 
Micro Devices [AMD] RS780 PCI to PCI 
bridge (PCIE port 5) (prog-if 00 

> [Normal decode])
> 	Control: I/O+ 
Mem+ BusMaster+ SpecCycle- 
MemWINV- 
> VGASnoop- ParErr- Stepping- 
SERR+ FastB2B- DisINTx+
> 	
Status: Cap+ 
> 66MHz- UDF- FastB2B- 
ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- 
> >SERR- <PERR- INTx-

> 	Latency: 0, Cache Line 
Size: 64 bytes
> 	Bus: 
> primary=00, 
secondary=02, subordinate=02, sec-
latency=0
> 	I/O behind 
> bridge: 
0000e000-0000efff
> 	Memory behind 
bridge: feb00000-febfffff
> 	
> 
Prefetchable memory behind bridge: 
00000000fdf00000-00000000fdffffff

> 	
> Secondary status: 66MHz- 
FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- 
> <MAbort- <SERR- 
<PERR-
> 	BridgeCtl: Parity+ SERR+ NoISA+ 
VGA- MAbort- 
> >Reset- 
FastB2B-
> 		PriDiscTmr- SecDiscTmr- 
DiscTmrStat- DiscTmrSERREn-
> 	
> 
Capabilities: [50] Power Management 
version 3
> 		Flags: PMEClk- DSI- 
D1- 
> D2- AuxCurrent=0mA PME(D0+,D1-
,D2-,D3hot+,D3cold+)
> 		Status: 
D0 PME-
> Enable- DSel=0 DScale=0 
PME-
> 	Capabilities: [58] Express 
(v2) Root Port 
> (Slot+), MSI 00

> 		DevCap:	MaxPayload 128 bytes, 
PhantFunc 0, Latency 
> L0s <64ns, 
L1 <1us
> 			ExtTag+ RBE+ FLReset-

> 		DevCtl:	Report errors: 
> 
Correctable- Non-Fatal- Fatal- 
Unsupported-
> 			RlxdOrd+ ExtTag- 
> 
PhantFunc- AuxPwr- NoSnoop+
> 			
MaxPayload 128 bytes, MaxReadReq 128 

> bytes
> 		DevSta:	CorrErr- 
UncorrErr- FatalErr- UnsuppReq- AuxPwr- 

> TransPend-
> 		LnkCap:	Port 
#1, Speed 5GT/s, Width x1, ASPM L0s L1, 

> Latency L0 <64ns, L1 <1us
> 	
		ClockPM- Suprise- LLActRep+ BwNot+
> 	
	
> LnkCtl:	ASPM Disabled; RCB 
64 bytes Disabled- Retrain- CommClk+
> 	
		
> ExtSynch- ClockPM- 
AutWidDis- BWInt- AutBWInt-
> 		LnkSta:	Speed 
2.5GT/s, 
> Width x1, 
TrErr- Train- SlotClk+ DLActive+ BWMgmt+ 
ABWMgmt-
> 		SltCap:	
> 
AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- 
HotPlug- Surpise-
> 			Slot #  
a, 
> PowerLimit 25.000000; Interlock- 
NoCompl+
> 		SltCtl:	Enable: 
AttnBtn- 
> PwrFlt- MRL- PresDet- 
CmdCplt- HPIrq- LinkChg-
> 			
Control: AttnInd 
> Unknown, PwrInd 
Unknown, Power- Interlock-
> 		
SltSta:	Status: AttnBtn- 
> PowerFlt- 
MRL- CmdCplt- PresDet+ Interlock-

> 			Changed: MRL- PresDet+ 
> 
LinkState+
> 		RootCtl: ErrCorrectable- 
ErrNon-Fatal- ErrFatal- 
> 
PMEIntEna- CRSVisible-
> 		RootCap: 
CRSVisible-
> 		RootSta: PME 
ReqID 
> 0000, PMEStatus- PMEPending-
> 		
DevCap2: Completion Timeout: 
Not 
> Supported, TimeoutDis- ARIFwd-
> 		
DevCtl2: Completion Timeout: 
50us to 
> 50ms, TimeoutDis- ARIFwd-
> 		
LnkCtl2: Target Link Speed: 
2.5GT/s, 
> EnterCompliance- SpeedDis-, 
Selectable De-emphasis: -6dB

> 			 Transmit 
> Margin: Normal Operating 
Range, 
EnterModifiedCompliance- ComplianceSOS-
> 
> 			 Compliance De-

emphasis: -6dB
> 		LnkSta2: Current De-emphasis Level: 
> -6dB
> 	

Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- 
> 

Count=1/1 Enable+
> 		Address: fee0f00c  Data: 4161
> 	Capabilities: 

[b0] 
> Subsystem: ASUSTeK Computer Inc. Device 83a2
> 	Capabilities: 

[b8] 
> HyperTransport: MSI Mapping Enable+ Fixed+
> 	Capabilities: 

[100] Vendor 
> Specific Information <?>
> 	Capabilities: [110] 
Virtual 
Channel <?>
> 	
> Kernel driver in use: pcieport-driver
> 
> 
00:11.0 
SATA controller: ATI 
> Technologies Inc SB700/SB800 SATA 
Controller 
[AHCI mode] (prog-if 01 
> [AHCI 1.0])
> 	Subsystem: 
ASUSTeK Computer 
Inc. Device 8389
> 	Control: 
> I/O+ Mem+ BusMaster+ 
SpecCycle- 
MemWINV- VGASnoop- ParErr- Stepping- 
> SERR+ FastB2B- 
DisINTx-
> 	
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- 
> DEVSEL=medium 
>TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 
> 64, 
Cache Line 
Size: 64 bytes
> 	Interrupt: pin A routed to IRQ 22
> 	
> 
Region 0: I/O 
ports at c000 [size=8]
> 	Region 1: I/O ports at b000 
> 
[size=4]
> 	
Region 2: I/O ports at a000 [size=8]
> 	Region 3: I/O 
ports at 
> 9000 
[size=4]
> 	Region 4: I/O ports at 8000 [size=16]
> 	
Region 5: Memory 

> at fe9ffc00 (32-bit, non-prefetchable) [size=1K]

> 	Capabilities: 
[60] 
> Power Management version 2
> 		Flags: PMEClk- 
DSI+ D1- D2- 
AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> 		
Status: D0 PME-
Enable- DSel=0 
> DScale=0 PME-
> 	Capabilities: [70] 
SATA HBA <?>
> 	
Kernel driver in use: 
> ahci
> 
> 00:12.0 USB 
Controller: ATI 
Technologies Inc SB700/SB800 USB 
> OHCI0 Controller 
(prog-if 10 
[OHCI])
> 	Subsystem: ASUSTeK Computer Inc. 
> Device 8389

> 	Control: 
I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
> VGASnoop- 
ParErr- Stepping- 
SERR+ FastB2B- DisINTx-
> 	Status: Cap- 
> 66MHz+ 
UDF- FastB2B+ ParErr- 
DEVSEL=medium >TAbort- <TAbort- <MAbort- 
> 
>SERR- <PERR- INTx-
> 	
Latency: 64, Cache Line Size: 64 bytes
> 	
Interrupt: 
> pin A routed to 
IRQ 16
> 	Region 0: Memory at fe9fe000 
(32-bit, non-
> prefetchable) 
[size=4K]
> 	Kernel driver in use: 
ohci_hcd
> 	Kernel 
> modules: ohci-
hcd
> 
> 00:12.1 USB Controller: 
ATI Technologies Inc SB700 
> USB 
OHCI1 Controller (prog-if 10 [OHCI])

> 	Subsystem: ASUSTeK Computer 
> 
Inc. Device 8389
> 	Control: I/O+ 
Mem+ BusMaster+ SpecCycle- MemWINV+ 

> VGASnoop- ParErr- Stepping- 
SERR+ FastB2B- DisINTx-
> 	Status: Cap- 

> 66MHz+ UDF- FastB2B+ 
ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- 
> >SERR- <PERR- 
INTx-
> 	Latency: 64, Cache Line Size: 64 
bytes
> 	Interrupt: 
> pin A 
routed to IRQ 16
> 	Region 0: Memory at 
fe9fd000 (32-bit, non-
> 
prefetchable) [size=4K]
> 	Kernel driver in 
use: ohci_hcd
> 	Kernel 
> 
modules: ohci-hcd
> 
> 00:12.2 USB 
Controller: ATI Technologies Inc 
> 
SB700/SB800 USB EHCI Controller 
(prog-if 20 [EHCI])
> 	Subsystem: 
ASUSTeK 
> Computer Inc. Device 8389

> 	Control: I/O- Mem+ BusMaster+ 
SpecCycle- 
> MemWINV+ VGASnoop- 
ParErr- Stepping- SERR+ FastB2B- 
DisINTx-
> 	Status: 
> Cap+ 66MHz+ 
UDF- FastB2B+ ParErr- DEVSEL=medium 
>TAbort- <TAbort- 
> <MAbort- 
>SERR- <PERR- INTx-
> 	Latency: 64, 
Cache Line Size: 64 bytes
> 	
> 
Interrupt: pin B routed to IRQ 17
> 	
Region 0: Memory at fe9ff800 (32-

> bit, non-prefetchable) [size=256]

> 	Capabilities: [c0] Power 
Management 
> version 2
> 		Flags: PMEClk- 
DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,
> D3hot+,D3cold-)
> 		
Status: D0 PME-Enable- DSel=0 
DScale=0 PME-
> 		Bridge: 
> PM- B3+
> 	
Capabilities: [e4] Debug port: 
BAR=1 offset=00e0
> 	Kernel 
> driver 
in use: ehci_hcd
> 	Kernel 
modules: ehci-hcd
> 
> 00:13.0 USB 
> 
Controller: ATI Technologies Inc 
SB700/SB800 USB OHCI0 Controller 
(prog-
> if 10 [OHCI])
> 	Subsystem: 
ASUSTeK Computer Inc. Device 8389

> 	Control: 
> I/O- Mem+ BusMaster+ 
SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- 
> SERR+ FastB2B- 
DisINTx-
> 	Status: Cap- 66MHz+ 
UDF- FastB2B+ ParErr- 
> DEVSEL=medium 
>TAbort- <TAbort- <MAbort- 
>SERR- <PERR- INTx-
> 	Latency: 
> 64, Cache 
Line Size: 64 bytes
> 	
Interrupt: pin A routed to IRQ 18
> 	
> Region 
0: Memory at fe9fc000 
(32-bit, non-prefetchable) [size=4K]
> 	
> Kernel 
driver in use: 
ohci_hcd
> 	Kernel modules: ohci-hcd
> 
> 00:13.1 USB 
> 
Controller: 
ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 
10 
> [OHCI])

> 	Subsystem: ASUSTeK Computer Inc. Device 8389
> 	
Control: I/O+ 
> 
Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ 

> FastB2B- DisINTx-
> 	Status: Cap- 66MHz+ UDF- 
FastB2B+ ParErr- 
> 
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- 
<PERR- INTx-
> 	
Latency: 
> 64, Cache Line Size: 64 bytes
> 	Interrupt: 
pin A routed 
to IRQ 18
> 	
> Region 0: Memory at fe9fb000 (32-bit, non-

prefetchable) [size=4K]
> 	
> Kernel driver in use: ohci_hcd
> 	Kernel 

modules: ohci-hcd
> 
> 00:13.2 USB 
> Controller: ATI Technologies Inc 

SB700/SB800 USB EHCI Controller (prog-
> if 20 [EHCI])
> 	Subsystem: 

ASUSTeK Computer Inc. Device 8389
> 	Control: 
> I/O- Mem+ BusMaster+ 

SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- 
> SERR+ FastB2B- 

DisINTx-
> 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- 
> DEVSEL=medium 

>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> 	Latency: 
> 64, 
Cache 
Line Size: 64 bytes
> 	Interrupt: pin B routed to IRQ 19
> 	
> 
Region 
0: Memory at fe9ff400 (32-bit, non-prefetchable) [size=256]
> 	

> 
Capabilities: [c0] Power Management version 2
> 		Flags: PMEClk- 
DSI- 
D1+ 
> D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> 		
Status: 
D0 PME-
> Enable- DSel=0 DScale=0 PME-
> 		Bridge: PM- B3+
> 	

Capabilities: [e4] 
> Debug port: BAR=1 offset=00e0
> 	Kernel driver 
in 
use: ehci_hcd
> 	Kernel 
> modules: ehci-hcd
> 
> 00:14.0 SMBus: 
ATI 
Technologies Inc SBx00 SMBus 
> Controller (rev 3c)
> 	Subsystem: 

ASUSTeK Computer Inc. Device 8389
> 	
> Control: I/O+ Mem+ BusMaster- 

SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- 

DisINTx+
> 	Status: Cap+ 66MHz+ UDF- FastB2B- 
> ParErr- DEVSEL=medium 

>TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
> 	
> Capabilities: 
[b0] 
HyperTransport: MSI Mapping Enable- Fixed+
> 
> 00:14.1 
> IDE 

interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if 
> 

8a [Master SecP PriP])
> 	Subsystem: ASUSTeK Computer Inc. Device 8389


> 	
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 

ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
> 	Status: Cap+ 66MHz+ 

UDF- FastB2B- 
> ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- 

>SERR- <PERR- INTx-
> 	
> Latency: 64
> 	Interrupt: pin A routed to 
IRQ 
16
> 	Region 0: I/O ports at 
> 01f0 [size=8]
> 	Region 1: I/O 
ports at 
03f4 [size=1]
> 	Region 2: I/O 
> ports at 0170 [size=8]
> 	
Region 3: 
I/O ports at 0374 [size=1]
> 	Region 4: 
> I/O ports at ff00 
[size=16]

> 	Capabilities: [70] Message Signalled 
> Interrupts: Mask- 
64bit- 
Count=1/1 Enable-
> 		Address: 00000000  Data: 
> 0000
> 	
Kernel driver 
in use: pata_atiixp
> 
> 00:14.2 Audio device: ATI 
> 
Technologies Inc 
SBx00 Azalia (Intel HDA)
> 	Subsystem: ASUSTeK 
Computer 
> Inc. Device 
836c
> 	Control: I/O- Mem+ BusMaster+ 
SpecCycle- MemWINV- 
> VGASnoop- 
ParErr- Stepping- SERR- FastB2B- 
DisINTx-
> 	Status: Cap+ 
> 66MHz- 
UDF- FastB2B- ParErr- DEVSEL=slow 
>TAbort- <TAbort- <MAbort- 
> >SERR- 
<PERR- INTx-
> 	Latency: 64, 
Cache Line Size: 64 bytes
> 	Interrupt: 
> 
pin ? routed to IRQ 16
> 	
Region 0: Memory at fe9f4000 (64-bit, non-
> 
prefetchable) [size=16K]

> 	Capabilities: [50] Power Management version 
2
> 
> 		Flags: PMEClk- 
DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,
D3hot+,
> D3cold+)
> 		
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 	
Kernel driver 
> in 
use: HDA Intel
> 	Kernel modules: snd-hda-intel
> 

> 00:14.3 ISA 
bridge: 
> ATI Technologies Inc SB700/SB800 LPC host 
controller
> 	
Subsystem: 
> ASUSTeK Computer Inc. Device 8389
> 	
Control: I/O+ Mem+ 
BusMaster+ 
> SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- 
FastB2B- DisINTx-
> 
> 	Status: Cap- 66MHz+ UDF- 
FastB2B- ParErr- 
DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- 
<PERR- INTx-
> 	
Latency: 0
> 
> 00:14.4 PCI bridge: 
> ATI Technologies 
Inc SBx00 PCI 
to PCI Bridge (prog-if 01 [Subtractive 
> decode])
> 	
Control: I/O+ 
Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- 
Stepping- 
SERR+ FastB2B- DisINTx-
> 	Status: Cap- 66MHz+ UDF- 
> 
FastB2B+ 
ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- 
<PERR- 
> 
INTx-
> 	Latency: 64
> 	Bus: primary=00, secondary=03, 
subordinate=03, 
sec-
> latency=64
> 	I/O behind bridge: 0000f000-
00000fff
> 	Memory 
behind bridge: 
> fff00000-000fffff
> 	Prefetchable 
memory behind 
bridge: fff00000-000fffff
> 
> 	Secondary status: 66MHz- 
FastB2B+ 
ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort+ <SERR- 
<PERR-
> 	
BridgeCtl: Parity+ SERR+ NoISA+ VGA- 
> MAbort- >Reset- 
FastB2B-
> 		
PriDiscTmr- SecDiscTmr- DiscTmrStat- 
> DiscTmrSERREn-
> 

> 00:14.5 
USB Controller: ATI Technologies Inc 
> SB700/SB800 USB OHCI2 

Controller (prog-if 10 [OHCI])
> 	Subsystem: 
> ASUSTeK Computer Inc. 

Device 8389
> 	Control: I/O- Mem+ BusMaster+ 
> SpecCycle- MemWINV- 

VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> 
> 	Status: Cap- 

66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- 

<MAbort- >SERR- <PERR- INTx-
> 	Latency: 64, Cache Line Size: 64 
> 

bytes
> 	Interrupt: pin C routed to IRQ 18
> 	Region 0: Memory at 

fe9fa000 
> (32-bit, non-prefetchable) [size=4K]
> 	Kernel driver in 

use: ohci_hcd
> 	
> Kernel modules: ohci-hcd
> 
> 00:18.0 Host bridge: 

Advanced Micro Devices 
> [AMD] Family 10h [Opteron, Athlon64, 
Sempron] 
HyperTransport 
> Configuration
> 	Control: I/O- Mem- 
BusMaster- 
SpecCycle- MemWINV- 
> VGASnoop- ParErr- Stepping- SERR- 
FastB2B- 
DisINTx-
> 	Status: Cap+ 
> 66MHz- UDF- FastB2B- ParErr- 
DEVSEL=fast 
>TAbort- <TAbort- <MAbort- 
> >SERR- <PERR- INTx-
> 	
Capabilities: [80] 
HyperTransport: Host or 
> Secondary Interface
> 		
Command: WarmRst+ 
DblEnd- DevNum=0 ChainSide- 
> HostHide+ Slave- 
<EOCErr- DUL-
> 		Link 
Control: CFlE- CST- CFE- <LkFail- 
> Init+ EOC- 
TXO- <CRCErr=0 IsocEn+ 
LSEn+ ExtCTL- 64b-
> 		Link Config: 
> 
MLWI=16bit DwFcIn- MLWO=16bit 
DwFcOut- LWI=16bit DwFcInEn- LWO=16bit 

> DwFcOutEn-
> 		Revision ID: 
3.00
> 		Link Frequency: [b]
> 		Link 
Error: 
> <Prot- <Ovfl- <EOC- 
CTLTm-
> 		Link Frequency Capability: 
200MHz+ 300MHz- 
> 400MHz+ 
500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4
GHz- 1.6GHz- Vend-
> 		
> 
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- 
ECTLT- 64bA+ UIDRD- ExtRS- 

> UCnfE-
> 
> 00:18.1 Host bridge: 
Advanced Micro Devices [AMD] Family 
10h 
> [Opteron, Athlon64, 
Sempron] Address Map
> 	Control: I/O- Mem- 
BusMaster- 
> SpecCycle- 
MemWINV- VGASnoop- ParErr- Stepping- SERR- 
FastB2B- DisINTx-
> 
> 	
Status: Cap- 66MHz- UDF- FastB2B- ParErr- 
DEVSEL=fast >TAbort- 
> 
<TAbort- <MAbort- >SERR- <PERR- INTx-
> 
> 00:
18.2 Host bridge: 
Advanced 
> Micro Devices [AMD] Family 10h [Opteron, 
Athlon64, 
Sempron] DRAM 
> Controller
> 	Control: I/O- Mem- BusMaster- 

SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- 

DisINTx-
> 	Status: Cap- 66MHz- UDF- 
> FastB2B- ParErr- DEVSEL=fast 

>TAbort- <TAbort- <MAbort- >SERR- <PERR- 
> INTx-
> 	Kernel modules: 

amd64_edac_mod
> 
> 00:18.3 Host bridge: Advanced 
> Micro Devices 

[AMD] Family 10h [Opteron, Athlon64, Sempron] 
> Miscellaneous Control


> 	Control: I/O- Mem- BusMaster- SpecCycle- 
> MemWINV- VGASnoop- 

ParErr- Stepping- SERR- FastB2B- DisINTx-
> 	Status: 
> Cap+ 66MHz- 

UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- 

<PERR- INTx-
> 	Capabilities: [f0] Secure device <?>
> 
> 00:
> 18.4 

Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, 
> 

Athlon64, Sempron] Link Control
> 	Control: I/O- Mem- BusMaster- 
> 

SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-


> 
> 	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 

> 
<TAbort- <MAbort- >SERR- <PERR- INTx-
> 
> 01:00.0 VGA compatible 

> 
controller: ATI Technologies Inc Device 954f (prog-if 00 [VGA 
> 

controller])
> 	Subsystem: ASUSTeK Computer Inc. Device 02a8
> 	

Control: 
> I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 

Stepping- 
> SERR+ FastB2B- DisINTx-
> 	Status: Cap+ 66MHz- UDF- 

FastB2B- ParErr- 
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- 

<PERR- INTx-
> 	Latency: 0, 
> Cache Line Size: 64 bytes
> 	Interrupt: 

pin A routed to IRQ 18
> 	Region 0: 
> Memory at d0000000 (64-bit, 

prefetchable) [size=256M]
> 	Region 2: Memory 
> at feaf0000 (64-bit, 

non-prefetchable) [size=64K]
> 	Region 4: I/O ports 
> at d000 

[size=256]
> 	Expansion ROM at feac0000 [disabled] [size=128K]
> 	
> 

Capabilities: [50] Power Management version 3
> 		Flags: PMEClk- DSI- 

D1+ 
> D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> 		Status: 

D0 PME-
> Enable- DSel=0 DScale=0 PME-
> 	Capabilities: [58] Express 

(v2) Legacy 
> Endpoint, MSI 00
> 		DevCap:	MaxPayload 128 bytes, 

PhantFunc 0, Latency 
> L0s <4us, L1 unlimited
> 			ExtTag+ AttnBtn- 

AttnInd- PwrInd- RBE+ 
> FLReset-
> 		DevCtl:	Report errors: 

Correctable- Non-Fatal- Fatal- 
> Unsupported-
> 			RlxdOrd+ ExtTag- 

PhantFunc- AuxPwr- NoSnoop+
> 			
> MaxPayload 128 bytes, MaxReadReq 

128 bytes
> 		DevSta:	CorrErr- 
> UncorrErr- FatalErr- UnsuppReq- 

AuxPwr- TransPend-
> 		LnkCap:	Port #0, 
> Speed 2.5GT/s, Width x16, 

ASPM L0s L1, Latency L0 <64ns, L1 <1us
> 			
> ClockPM- Suprise- 

LLActRep- BwNot-
> 		LnkCtl:	ASPM Disabled; RCB 64 
> bytes Disabled- 

Retrain- CommClk+
> 			ExtSynch- ClockPM- AutWidDis- 
> BWInt- 

AutBWInt-
> 		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- 
> 

SlotClk+ DLActive- BWMgmt- ABWMgmt-
> 		DevCap2: Completion Timeout: 

Not 
> Supported, TimeoutDis-
> 		DevCtl2: Completion Timeout: 50us to 

50ms, 
> TimeoutDis-
> 		LnkCtl2: Target Link Speed: 2.5GT/s, 

EnterCompliance- 
> SpeedDis-, Selectable De-emphasis: -6dB
> 			 

Transmit Margin: Normal 
> Operating Range, EnterModifiedCompliance- 

ComplianceSOS-
> 			 Compliance 
> De-emphasis: -6dB
> 		LnkSta2: 

Current De-emphasis Level: -6dB
> 	
> Capabilities: [a0] Message 

Signalled Interrupts: Mask- 64bit+ Count=1/1 
> Enable-
> 		Address: 

0000000000000000  Data: 0000
> 	Capabilities: [100] 
> Vendor Specific 

Information <?>
> 
> 01:00.1 Audio device: ATI Technologies 
> Inc 

Device aa38
> 	Subsystem: ASUSTeK Computer Inc. Device aa38
> 	

Control: 
> I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 

Stepping- 
> SERR+ FastB2B- DisINTx+
> 	Status: Cap+ 66MHz- UDF- 

FastB2B- ParErr- 
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- 

<PERR- INTx-
> 	Latency: 0, 
> Cache Line Size: 64 bytes
> 	Interrupt: 

pin B routed to IRQ 28
> 	Region 0: 
> Memory at feaec000 (64-bit, non-

prefetchable) [size=16K]
> 	Capabilities: 
> [50] Power Management 

version 3
> 		Flags: PMEClk- DSI- D1+ D2+ 
> AuxCurrent=0mA PME(D0-,D1-
,
D2-,D3hot-,D3cold-)
> 		Status: D0 PME-Enable- 
> DSel=0 DScale=0 
PME-

> 	Capabilities: [58] Express (v2) Legacy Endpoint, 
> MSI 00
> 		

DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, 
> L1 

unlimited
> 			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> 		
> 

DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> 			


> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> 			MaxPayload 128 

bytes, 
> MaxReadReq 128 bytes
> 		DevSta:	CorrErr- UncorrErr- 

FatalErr- UnsuppReq- 
> AuxPwr- TransPend-
> 		LnkCap:	Port #0, Speed 

2.5GT/s, Width x16, ASPM 
> L0s L1, Latency L0 <64ns, L1 <1us
> 			

ClockPM- Suprise- LLActRep- BwNot-
> 
> 		LnkCtl:	ASPM Disabled; RCB 
64 
bytes Disabled- Retrain- CommClk+
> 			
> ExtSynch- ClockPM- 
AutWidDis- 
BWInt- AutBWInt-
> 		LnkSta:	Speed 2.5GT/s, 
> Width x16, 
TrErr- Train- 
SlotClk+ DLActive- BWMgmt- ABWMgmt-
> 		DevCap2: 
> 
Completion Timeout: 
Not Supported, TimeoutDis-
> 		DevCtl2: 
Completion 
> Timeout: 50us to 
50ms, TimeoutDis-
> 		LnkCtl2: Target 
Link Speed: 2.5
> GT/s, 
EnterCompliance- SpeedDis-, Selectable De-
emphasis: -6dB
> 			 
> 
Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- 
> 
ComplianceSOS-
> 			 Compliance De-
emphasis: -6dB
> 		LnkSta2: Current 
De-
> emphasis Level: -6dB
> 	
Capabilities: [a0] Message Signalled 
Interrupts: 
> Mask- 64bit+ 
Count=1/1 Enable+
> 		Address: 
00000000fee0f00c  Data: 4189
> 	
> 
Capabilities: [100] Vendor Specific 
Information <?>
> 	Kernel driver 
in 
> use: HDA Intel
> 	Kernel 
modules: snd-hda-intel
> 
> 02:00.0 
Ethernet 
> controller: Realtek 
Semiconductor Co., Ltd. RTL8111/8168B 
PCI Express 
> Gigabit Ethernet 
controller (rev 03)
> 	Subsystem: 
ASUSTeK Computer Inc. 
> Device 83a3

> 	Control: I/O+ Mem+ BusMaster+ 
SpecCycle- MemWINV- 
> VGASnoop- 
ParErr- Stepping- SERR+ FastB2B- 
DisINTx+
> 	Status: Cap+ 
> 66MHz- 
UDF- FastB2B- ParErr- DEVSEL=fast 
>TAbort- <TAbort- <MAbort- 
> >SERR- 
<PERR- INTx-
> 	Latency: 0, Cache 
Line Size: 64 bytes
> 	Interrupt: 
> 
pin A routed to IRQ 27
> 	Region 
0: I/O ports at e800 [size=256]
> 	
Region 
> 2: Memory at fdfff000 (64-
bit, prefetchable) [size=4K]
> 	
Region 4: 
> Memory at fdff8000 (64-
bit, prefetchable) [size=16K]
> 	
Expansion ROM at 
> febf0000 
[disabled] [size=64K]
> 	Capabilities: 
[40] Power Management 
> 
version 3
> 		Flags: PMEClk- DSI- D1+ D2+ 
AuxCurrent=375mA PME(D0+,
D1+,
> D2+,D3hot+,D3cold+)
> 		Status: D0 PME-
Enable- DSel=0 DScale=0 
PME-
> 	
> Capabilities: [50] Message Signalled 
Interrupts: Mask- 
64bit+ Count=1/1 
> Enable+
> 		Address: 
00000000fee0f00c  Data: 4179

> 	Capabilities: [70] 
> Express (v2) 
Endpoint, MSI 01
> 		DevCap:	
MaxPayload 256 bytes, PhantFunc 
> 0, 
Latency L0s <512ns, L1 <64us
> 		
	ExtTag- AttnBtn- AttnInd- PwrInd- 
> 
RBE+ FLReset-
> 		DevCtl:	Report 
errors: Correctable- Non-Fatal- 
Fatal- 
> Unsupported-
> 			RlxdOrd- 
ExtTag- PhantFunc- AuxPwr- 
NoSnoop-
> 			
> MaxPayload 128 bytes, 
MaxReadReq 4096 bytes
> 		
DevSta:	CorrErr+ 
> UncorrErr- FatalErr- 
UnsuppReq+ AuxPwr+ TransPend-

> 		LnkCap:	Port #0, 
> Speed 2.5GT/s, 
Width x1, ASPM L0s L1, Latency 
L0 <512ns, L1 <64us
> 			
> ClockPM+ 
Suprise- LLActRep- BwNot-
> 		
LnkCtl:	ASPM Disabled; RCB 64 
> bytes 
Disabled- Retrain- CommClk+
> 			
ExtSynch- ClockPM- AutWidDis- 
> 
BWInt- AutBWInt-
> 		LnkSta:	Speed 2.5
GT/s, Width x1, TrErr- Train- 
> 
SlotClk+ DLActive- BWMgmt- ABWMgmt-
> 	
	DevCap2: Completion Timeout: 
Not 
> Supported, TimeoutDis+
> 		
DevCtl2: Completion Timeout: 50us to 
50ms, 
> TimeoutDis-
> 		LnkCtl2: 
Target Link Speed: 2.5GT/s, 
EnterCompliance- 
> SpeedDis-, Selectable 
De-emphasis: -6dB
> 			 
Transmit Margin: Normal 
> Operating Range, 
EnterModifiedCompliance- 
ComplianceSOS-
> 			 Compliance 
> De-
emphasis: -6dB
> 		LnkSta2: 
Current De-emphasis Level: -6dB
> 	
> 
Capabilities: [ac] MSI-X: 
Enable- Mask- TabSize=4
> 		Vector table: 
BAR=4 
> offset=00000000
> 		
PBA: BAR=4 offset=00000800
> 	
Capabilities: [cc] Vital 
> Product Data 
<?>
> 	Capabilities: [100] 
Advanced Error Reporting
> 		UESta:	
> DLP- 
SDES- TLP- FCP- CmpltTO- 
CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- 
> 
UnsupReq- ACSVoil-
> 		
UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- 
CmpltAbrt- 
> UnxCmplt- RxOF- 
MalfTLP- ECRC- UnsupReq- ACSVoil-
> 		
UESvrt:	DLP+ SDES+ 
> TLP- FCP+ 
CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ 
MalfTLP+ ECRC- UnsupReq- 
> 
ACSVoil-
> 		CESta:	RxErr- BadTLP- 
BadDLLP- Rollover- Timeout- 
> 
NonFatalErr+
> 		CESta:	RxErr- BadTLP- 
BadDLLP- Rollover- Timeout- 
> 
NonFatalErr+
> 		AERCap:	First Error 
Pointer: 00, GenCap+ CGenEn- 
ChkCap+ 
> ChkEn-
> 	Capabilities: [140] 
Virtual Channel <?>
> 	
Capabilities: [160] 
> Device Serial Number 00-
00-00-00-00-00-00-00
> 	
Kernel driver in use: 
> r8169
> 
> 
> 
> 
> 
Risparmia con Tutto 
Incluso Light: telefono + adsl 8 mega a soli 14,95 
€ al mese.
> 
> 
Gratis la Sim Tiscali Mobile con 25 euro di traffico! 

> 
> L'offerta è 
valida solo se attivi entro il 20/05/10
> 
> http:
//abbonati.tiscali.
it/telefono-adsl/prodotti/tc/tuttoincluso_light/?WT.
mc_id=01fw
> 
_______________________________________________ Alsa-
devel mailing list 
Alsa-devel@alsa-project.org http://mailman.alsa-
project.
org/mailman/listinfo/alsa-devel







Trova Casa sul portale 
immobiliare n°1 in Italia

http://tiscali.casa.it




Trova Casa sul portale immobiliare n°1 in Italia

http://tiscali.casa.it

[-- Attachment #2: proccodec0 --]
[-- Type: APPLICATION/OCTET-STREAM, Size: 11947 bytes --]

Codec: VIA VT1708S
Address: 0
Function Id: 0x1
Vendor Id: 0x11060397
Subsystem Id: 0x1043836c
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=1, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Front Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="VT1708S Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
  Amp-Out vals:  [0x2a 0x2a]
  Converter: stream=0, channel=0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Surround Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
  Amp-Out vals:  [0x2a 0x2a]
  Converter: stream=0, channel=0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3
  Power: setting=D3, actual=D3
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
  Control: name="IEC958 Playback Con Mask", index=0, device=0
  Control: name="IEC958 Playback Pro Mask", index=0, device=0
  Control: name="IEC958 Playback Default", index=0, device=0
  Control: name="IEC958 Playback Switch", index=0, device=0
  Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
  Device: name="VT1708S Digital", type="SPDIF", device=1
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
Node 0x13 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="VT1708S Analog", type="Audio", device=0
  Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x13 0x13]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3
  Power: setting=D3, actual=D3
  Connection: 1
     0x17
Node 0x14 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Control: name="Capture Volume", index=1, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=1, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x13 0x13]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3
  Power: setting=D3, actual=D3
  Connection: 1
     0x1e
Node 0x15 [Audio Output] wcaps 0x611: Stereo Digital
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
Node 0x16 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
  Control: name="Master Front Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Master Front Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Front Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=4, ofs=0
  Control: name="Front Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=4, ofs=0
  Control: name="Line Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=3, ofs=0
  Control: name="Line Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=3, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x1e 0x1e] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x1f 0x1f] [0x97 0x97] [0x97 0x97]
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
  Connection: 7
     0x10 0x1f 0x1a 0x1b 0x1e 0x1d 0x25
Node 0x17 [Audio Selector] wcaps 0x300501: Stereo
  Control: name="Input Source", index=0, device=0
  Power states:  D0 D1 D2 D3
  Power: setting=D3, actual=D3
  Connection: 6
     0x1f 0x1a 0x1b 0x1e* 0x1d 0x16
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
  Control: name="Surround Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Power states:  D0 D1 D2 D3
  Power: setting=D3, actual=D3
  Connection: 1
     0x11
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
  Pincap 0x00000014: OUT Detect
  Pin Default 0x01011012: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0x1, Sequence = 0x2
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=04, enabled=1
  Power states:  D0 D1 D2 D3
  Power: setting=D3, actual=D3
  Connection: 1
     0x18
Node 0x1a [Pin Complex] wcaps 0x400581: Stereo
  Control: name="Mic Boost Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Smart 5.1", index=0, device=0
  Pincap 0x00002334: IN OUT Detect
    Vref caps: HIZ 50 100
  Pin Default 0x01a19036: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x3, Sequence = 0x6
  Pin-ctls: 0x21: IN VREF_50
  Unsolicited: tag=04, enabled=1
  Power states:  D0 D1 D2 D3
  Power: setting=D3, actual=D3
  Connection: 1
     0x26
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
  Control: name="Independent HP", index=0, device=0
  Control: name="Smart 5.1", index=0, device=0
  Pincap 0x00002334: IN OUT Detect
    Vref caps: HIZ 50 100
  Pin Default 0x0181303e: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0x3, Sequence = 0xe
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=04, enabled=1
  Power states:  D0 D1 D2 D3
  Power: setting=D3, actual=D3
  Connection: 1
     0x18
Node 0x1c [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Front Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x01014010: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=04, enabled=1
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
  Connection: 1
     0x16
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Independent HP", index=0, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0000233c: IN OUT HP Detect
    Vref caps: HIZ 50 100
  Pin Default 0x0221401f: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0xf
  Pin-ctls: 0xc0: OUT HP VREF_HIZ
  Unsolicited: tag=05, enabled=1
  Power states:  D0 D1 D2 D3
  Power: setting=D3, actual=D3
  Connection: 2
     0x16* 0x25
Node 0x1e [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Front Mic Boost Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Smart 5.1", index=0, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0000233c: IN OUT HP Detect
    Vref caps: HIZ 50 100
  Pin Default 0x02a19038: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
    DefAssociation = 0x3, Sequence = 0x8
  Pin-ctls: 0x21: IN VREF_50
  Unsolicited: tag=04, enabled=1
  Power states:  D0 D1 D2 D3
  Power: setting=D3, actual=D3
  Connection: 2
     0x16 0x25*
Node 0x1f [Pin Complex] wcaps 0x400401: Stereo
  Pincap 0x00000020: IN
  Pin Default 0x503701f7: [N/A] CD at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x7
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
Node 0x20 [Pin Complex] wcaps 0x400701: Stereo Digital
  Pincap 0x00000010: OUT
  Pin Default 0x074311f0: [Jack] SPDIF Out at Ext Rear Panel
    Conn = ATAPI, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
  Connection: 1
     0x12
Node 0x21 [Pin Complex] wcaps 0x400701: Stereo Digital
  Pincap 0x00000010: OUT
  Pin Default 0x074521f0: [Jack] SPDIF Out at Ext Rear Panel
    Conn = Optical, Color = Grey
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
  Connection: 1
     0x15
Node 0x22 [Pin Complex] wcaps 0x400581: Stereo
  Pincap 0x00000014: OUT Detect
  Pin Default 0x01016011: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Orange
    DefAssociation = 0x1, Sequence = 0x1
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=04, enabled=1
  Power states:  D0 D1 D2 D3
  Power: setting=D3, actual=D3
  Connection: 1
     0x26
Node 0x23 [Pin Complex] wcaps 0x400581: Stereo
  Pincap 0x00000014: OUT Detect
  Pin Default 0x01012014: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Grey
    DefAssociation = 0x1, Sequence = 0x4
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=04, enabled=1
  Power states:  D0 D1 D2 D3
  Power: setting=D3, actual=D3
  Connection: 1
     0x27
Node 0x24 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Center Playback Volume", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Volume", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
  Amp-Out vals:  [0x2a 0x2a]
  Converter: stream=0, channel=0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3
  Power: setting=D3, actual=D3
Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Side Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Headphone Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
  Amp-Out vals:  [0x2a 0x2a]
  Converter: stream=0, channel=0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
Node 0x26 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
  Control: name="Center Playback Switch", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Switch", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Power states:  D0 D1 D2 D3
  Power: setting=D3, actual=D3
  Connection: 1
     0x24
Node 0x27 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
  Control: name="Side Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
  Connection: 1
     0x25

[-- Attachment #3: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

             reply	other threads:[~2010-05-25 18:08 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-25 18:08 mutenmaster [this message]
  -- strict thread matches above, loose matches on Subject: below --
2010-05-19  9:33 snd_intel_hda : broken microphone mutenmaster
2010-05-23 16:46 ` Jerone Young

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=26600671.238021274810921411.JavaMail.root@ps22 \
    --to=mutenmaster@tiscali.it \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).