Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: Kai Vehmanen <kai.vehmanen@linux.intel.com>,
	alsa-devel@alsa-project.org,  tiwai@suse.de
Cc: libin.yang@intel.com
Subject: Re: [alsa-devel] [PATCH v3 01/10] ALSA: hda/hdmi - implement mst_no_extra_pcms flag
Date: Tue, 10 Sep 2019 15:33:35 -0500	[thread overview]
Message-ID: <326901ed-4cd2-af0e-0039-9cae55b787f7@linux.intel.com> (raw)
In-Reply-To: <20190910182916.29693-2-kai.vehmanen@linux.intel.com>



On 9/10/19 1:29 PM, Kai Vehmanen wrote:
> When mst_no_extra_pcms flag is set, the codec should not
> use backup PCMs to handle DP-MST scenarios. Instead a simple
> 1:1 mapping is assumed between PCMs and converters.

mst_no_extra_pcms is not set, which makes it hard to review and get the 
picture of what this does.

> 
> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
> ---
>   include/sound/hda_codec.h  |  1 +
>   sound/pci/hda/patch_hdmi.c | 19 ++++++++++++++-----
>   2 files changed, 15 insertions(+), 5 deletions(-)
> 
> diff --git a/include/sound/hda_codec.h b/include/sound/hda_codec.h
> index 9a0393cf024c..ac18f428eda6 100644
> --- a/include/sound/hda_codec.h
> +++ b/include/sound/hda_codec.h
> @@ -254,6 +254,7 @@ struct hda_codec {
>   	unsigned int force_pin_prefix:1; /* Add location prefix */
>   	unsigned int link_down_at_suspend:1; /* link down at runtime suspend */
>   	unsigned int relaxed_resume:1;	/* don't resume forcibly for jack */
> +	unsigned int mst_no_extra_pcms:1; /* no backup PCMs for DP-MST */
>   
>   #ifdef CONFIG_PM
>   	unsigned long power_on_acct;
> diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
> index bca5de78e9ad..59aaee4a40fd 100644
> --- a/sound/pci/hda/patch_hdmi.c
> +++ b/sound/pci/hda/patch_hdmi.c
> @@ -2072,15 +2072,24 @@ static bool is_hdmi_pcm_attached(struct hdac_device *hdac, int pcm_idx)
>   static int generic_hdmi_build_pcms(struct hda_codec *codec)
>   {
>   	struct hdmi_spec *spec = codec->spec;
> -	int idx;
> +	int idx, pcm_num;
>   
>   	/*
>   	 * for non-mst mode, pcm number is the same as before
> -	 * for DP MST mode, pcm number is (nid number + dev_num - 1)
> -	 *  dev_num is the device entry number in a pin
> -	 *
> +	 * for DP MST mode without extra PCM, pcm number is same
> +	 * for DP MST mode with extra PCMs, pcm number is
> +	 *  (nid number + dev_num - 1)
> +	 * dev_num is the device entry number in a pin
>   	 */
> -	for (idx = 0; idx < spec->num_nids + spec->dev_num - 1; idx++) {
> +
> +	if (codec->mst_no_extra_pcms)
> +		pcm_num = spec->num_nids;
> +	else
> +		pcm_num = spec->num_nids + spec->dev_num - 1;
> +
> +	codec_dbg(codec, "hdmi: pcm_num set to %d\n", pcm_num);
> +
> +	for (idx = 0; idx < pcm_num; idx++) {
>   		struct hda_pcm *info;
>   		struct hda_pcm_stream *pstr;
>   
> 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  reply	other threads:[~2019-09-10 20:54 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-10 18:29 [alsa-devel] [PATCH v3 00/10] adapt SOF to use snd-hda-codec-hdmi Kai Vehmanen
2019-09-10 18:29 ` [alsa-devel] [PATCH v3 01/10] ALSA: hda/hdmi - implement mst_no_extra_pcms flag Kai Vehmanen
2019-09-10 20:33   ` Pierre-Louis Bossart [this message]
2019-09-12  8:28     ` Kai Vehmanen
2019-09-10 18:29 ` [alsa-devel] [PATCH v3 02/10] ALSA: hda/hdmi - allow control creation without a linked pcm Kai Vehmanen
2019-09-10 20:31   ` Pierre-Louis Bossart
2019-09-12  8:16     ` Kai Vehmanen
2019-09-10 18:29 ` [alsa-devel] [PATCH v3 03/10] ASoC: hdac_hda: add support for HDMI/DP as a HDA codec Kai Vehmanen
2019-09-10 20:36   ` Pierre-Louis Bossart
2019-09-12  9:58     ` Kai Vehmanen
2019-09-10 18:29 ` [alsa-devel] [PATCH v3 04/10] ASoC: SOF: Intel: add support for snd-hda-codec-hdmi Kai Vehmanen
2019-09-10 20:52   ` Pierre-Louis Bossart
2019-09-12 12:06     ` Kai Vehmanen
2019-09-12 13:29       ` Pierre-Louis Bossart
2019-09-10 18:29 ` [alsa-devel] [PATCH v3 05/10] ASoC: Intel: skl-hda-dsp-generic: use snd-hda-codec-hdmi Kai Vehmanen
2019-09-10 20:49   ` Pierre-Louis Bossart
2019-09-10 18:29 ` [alsa-devel] [PATCH v3 06/10] ASoC: Intel: skl-hda-dsp-generic: fix include guard name Kai Vehmanen
2019-09-10 18:29 ` [alsa-devel] [PATCH v3 07/10] ASoC: Intel: bxt-da7219-max98357a: common hdmi codec support Kai Vehmanen
2019-09-10 18:29 ` [alsa-devel] [PATCH v3 08/10] ASoC: Intel: glk_rt5682_max98357a: " Kai Vehmanen
2019-09-10 18:29 ` [alsa-devel] [PATCH v3 09/10] ASoC: intel: sof_rt5682: " Kai Vehmanen
2019-09-10 18:29 ` [alsa-devel] [PATCH v3 10/10] ASoC: Intel: bxt_rt298: " Kai Vehmanen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=326901ed-4cd2-af0e-0039-9cae55b787f7@linux.intel.com \
    --to=pierre-louis.bossart@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=kai.vehmanen@linux.intel.com \
    --cc=libin.yang@intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox