From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001232]: Microphone in front bracket - very low volume
Date: Sun, 21 Aug 2005 03:25:07 +0200 [thread overview]
Message-ID: <32b6aa85e308e9187ee7a0a4c798bd7f@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1232>
======================================================================
Reported By: jirka
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1232
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: latest Ubuntu, RedHat (I tried them both)
Kernel Version: 2.6.10
======================================================================
Date Submitted: 07-04-2005 16:47 CEST
Last Modified: 08-21-2005 03:25 CEST
======================================================================
Summary: Microphone in front bracket - very low volume
Description:
I have mainboard MicroStar K8N Neo2 Platinum-54G - nForce3 Ultra (it's
nforce ultra chipset with integrated sound chip). This board has 7.1 audio
and audio can be recorded via "sound in" jack (stereo jack connector) or
"microphone" jack. These input jacks are placed on the back side of the
case (on the mainboard). When I connect microphone to this jack and turn
it on, it works great. But there is an option to connect some "sound
bracket" to this board. You can buy computer case which has some input
jacks on the front side and connect the cable from them to your mainboard.
So you get two more jacks. One for phones and one for microphone. If you
have headset (for internet telephony) with earphones and microphone, you
don't need to connect them to the back side of your case. You connect them
to the front side.
And this is a problem. If I connect my microphone to the front "sound
bracket", the volume is very very low. If I connect it to the back jack
(integrated on motherboard), it works normally (I can record with normal
volume).
I think this is not a configuration problem. I tried every combination in
alsamixer and nothing helps. Always front jack has very low audio. If I
record something using it, I need set very high volume to hear something,
if I play it.
Lots of people has these computer cases with front bracket and think it's
very confusing when it works normally in Windows and in Linux you cannot
use the front connector.
======================================================================
----------------------------------------------------------------------
jirka - 08-20-05 09:36
----------------------------------------------------------------------
I don't have time now to test the change, but if alchemyx says it's working
I think it will work for me too. I thought I had the 1.0.9 version but now
I found that my version is 1.0.9a so it probably makes a difference.
I think you can select this bug as solved and #0001346 too. Thanks for
great support and high quality software.
----------------------------------------------------------------------
alchemyx - 08-21-05 03:25
----------------------------------------------------------------------
Keep in mind that versions appeared in following order:
2005-05-27 ALSA 1.0.9 final release
2005-06-02 ALSA 1.0.9a release
2005-06-07 ALSA 1.0.9b release
2005-08-20 ALSA 1.0.10rc1 release
So if you have 1.0.9a it includes fixes from 1.0.9 also. I was testing
with 1.0.9b and there was everything fine.
Issue History
Date Modified Username Field Change
======================================================================
07-04-05 16:47 jirka New Issue
07-04-05 16:47 jirka Distribution => latest Ubuntu, RedHat
(I tried them both)
07-04-05 16:47 jirka Kernel Version => 2.6.10
07-08-05 12:13 tiwai Note Added: 0005416
07-08-05 15:31 jirka File Added: ac97_0_0
07-08-05 15:31 jirka File Added: ac97_0_0_regs
07-08-05 15:34 jirka File Added: asound.state
07-08-05 16:18 jirka Note Added: 0005432
08-18-05 23:03 alchemyx Note Added: 0005860
08-18-05 23:04 alchemyx Issue Monitored: alchemyx
08-19-05 12:31 vsu Note Added: 0005867
08-19-05 17:37 alchemyx Note Added: 0005871
08-20-05 09:36 jirka Note Added: 0005872
08-21-05 03:25 alchemyx Note Added: 0005886
======================================================================
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
next reply other threads:[~2005-08-21 1:25 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-21 1:25 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-01-12 23:15 [ALSA - driver 0001232]: Microphone in front bracket - very low volume bugtrack
2006-01-12 23:14 bugtrack
2005-08-20 7:36 bugtrack
2005-08-19 15:37 bugtrack
2005-08-19 10:31 bugtrack
2005-08-18 21:03 bugtrack
2005-07-08 14:18 bugtrack
2005-07-08 10:13 bugtrack
2005-07-04 14:47 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=32b6aa85e308e9187ee7a0a4c798bd7f@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox