Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001033]: hda sound 82801FB/FBM/FR/FW/FRW (ICH6 Family)
Date: Fri, 8 Apr 2005 21:08:24 +0200	[thread overview]
Message-ID: <354cda0103910d68ea05e73da5cd6232@bugtrack.alsa-project.org> (raw)


A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1033> 
======================================================================
Reported By:                sjankie
Assigned To:                
======================================================================
Project:                    ALSA - driver
Issue ID:                   1033
Category:                   PCI - azx
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Distribution:               
Kernel Version:             2.6.11.6
======================================================================
Date Submitted:             04-03-2005 15:07 CEST
Last Modified:              04-08-2005 21:08 CEST
======================================================================
Summary:                    hda sound 82801FB/FBM/FR/FW/FRW (ICH6 Family)
Description: 
0000:00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) High Definition Audio Controller (rev 04)

azx driver compliens about: NO AFG found.

alsmixer starts, but no sound.
======================================================================

----------------------------------------------------------------------
 Thomas - 04-05-05 19:50 
----------------------------------------------------------------------
Same problem here. Modules loaded but no sound.
I tried all models (even cmi while my card is supposed to be a realtek
ALC880.)
tested with 1.0.8, 1.0.9rc2, cvs.

lspci -v output:
0000:00:1b.0 Class 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
High Definition Audio Controller (rev 04)
        Subsystem: Rioworks: Unknown device 203d
        Flags: bus master, fast devsel, latency 0, IRQ 169
        Memory at 80000000 (64-bit, non-prefetchable)
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
        Capabilities: [70]
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=10 [0091]

lspci -vn:
0000:00:1b.0 Class 0403: 8086:2668 (rev 04)
        Subsystem: 161f:203d


dmesg output:
ALSA
/root/install/alsa/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:552:
codec_mask = 0x3
ALSA
/root/install/alsa/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_codec.c:511:
hda_codec: no AFG node found

I'll provide any additional informations required.

----------------------------------------------------------------------
 Thomas - 04-08-05 21:08 
----------------------------------------------------------------------
After some tweakings (don't ask me exactly what I did, I changed lots of
stuff), I've got it working.

Some problems though. Headphone and my laptop speaker are not working.
"Front" output works but there is lot of noise.
"Surround" "Center/LFE" don't work. It might be normal as "Front" is not
plugged.

I can't test inputs.

Issue History
Date Modified  Username       Field                    Change              
======================================================================
04-03-05 15:07 sjankie        New Issue                                    
04-03-05 15:07 sjankie        Kernel Version            => 2.6.11.6        
04-03-05 15:08 sjankie        Issue Monitored: sjankie                     
04-03-05 15:08 sjankie        Issue End Monitor: sjankie                    
04-03-05 15:08 sjankie        Issue Monitored: sjankie                     
04-04-05 17:09 1g0R           Note Added: 0004328                          
04-05-05 14:52 sjankie        Note Added: 0004337                          
04-05-05 18:48 Thomas         Issue Monitored: Thomas                      
04-05-05 19:50 Thomas         Note Added: 0004339                          
04-08-05 21:08 Thomas         Note Added: 0004373                          
======================================================================




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

             reply	other threads:[~2005-04-08 19:08 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-04-08 19:08 bugtrack [this message]
  -- strict thread matches above, loose matches on Subject: below --
2005-12-24  2:42 [ALSA - driver 0001033]: hda sound 82801FB/FBM/FR/FW/FRW (ICH6 Family) bugtrack
2005-10-05  2:48 bugtrack
2005-09-29 19:59 bugtrack
2005-04-05 17:50 bugtrack
2005-04-05 12:52 bugtrack
2005-04-04 15:09 bugtrack
2005-04-03 13:07 bugtrack

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=354cda0103910d68ea05e73da5cd6232@bugtrack.alsa-project.org \
    --to=bugtrack@alsa-project.org \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox