From: Patrick Shirkey <pshirkey@boosthardware.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel <alsa-devel@alsa-project.org>
Subject: Re: [Fwd: Multiple cards.]
Date: Wed, 12 Jun 2002 21:15:32 +0900 [thread overview]
Message-ID: <3D073B64.2010200@boosthardware.com> (raw)
In-Reply-To: s5hk7p42158.wl@alsa2.suse.de
Takashi Iwai wrote:
> At Wed, 12 Jun 2002 19:16:59 +0900,
> Patrick Shirkey wrote:
>
>>In your example you don't say whether your cards have are stereo or mono
>> channels.
>>
>>I get this ouput when starting jack
>>
>>----
>># jackd -R -v -d alsa -d ttable
>>jackd 0.33.0
>>Copyright 2001-2002 Paul Davis and others.
>>jackd comes with ABSOLUTELY NO WARRANTY
>>This is free software, and you are welcome to redistribute it
>>under certain conditions; see the file COPYING for details
>>
>>3475 waiting for signals
>>creating alsa driver ... ttable|1024|2|48000|swmon
>>ALSA: no playback configurations available
>>ALSA: cannot configure capture channel
>>cannot load driver module alsa
>>jack main caught signal 15
>>-----
>>
>>Using the following in my .asoundrc file. I'm not sure if it is correct
>>as card0 has two stereo pcm devices. I'm not sure whether they are being
>>defined in the following or not.
>>
>>Does
>>
>> slaves.a.channels 2
>>
>>refer to the pcm devices
>>
>> eg. hw:0,0 and hw:0,1
>>
>>or the first two mono channels available on card0?
>>
>> eg. left and right channels on hw:0,0
>
>
> the latter. hw:0,0 and hw:0,1 are different substreams,
> i.e. different pcms.
>
> if your second card has only one channel, then the amount of resultant
> channels will be three, as you modified. it should work so.
>
> do both cards support the same condition (48kHz) ?
>
>
Yes. Testing them seperately they both work at 48Khz
Do you know what this means?
----
# aplay -f dat -D ttable /1REC/beastie_boys-track_8.wav
Playing WAVE '/1REC/beastie_boys-track_8.wav' : Signed 16 bit Little
Endian, Rate 44100 Hz, Stereo
aplay: set_params:737: Broken configuration for this PCM: no
configurations available
# arecord -f cd -D multi -c 3 | aplay -D multi
Recording WAVE 'stdout' : Signed 16 bit Little Endian, Rate 44100 Hz,
Channels 3
arecord: set_params:737: Broken configuration for this PCM: no
configurations available
Playing WAVE 'stdin' : Signed 16 bit Little Endian, Rate 44100 Hz,
Channels 3
aplay: set_params:737: Broken configuration for this PCM: no
configurations available
----
--
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.boosthardware.com/LAU/guide/
========================================
_______________________________________________________________
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/
next prev parent reply other threads:[~2002-06-12 12:10 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-06-12 10:16 [Fwd: Multiple cards.] Patrick Shirkey
2002-06-12 11:21 ` Takashi Iwai
2002-06-12 12:15 ` Patrick Shirkey [this message]
2002-06-12 13:20 ` Takashi Iwai
2002-06-12 13:56 ` Patrick Shirkey
2002-06-12 13:57 ` Takashi Iwai
2002-06-12 15:02 ` Patrick Shirkey
2002-06-12 15:04 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D073B64.2010200@boosthardware.com \
--to=pshirkey@boosthardware.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox