Re: quattro multi plugin.

[Patrick Shirkey <pshirkey@boosthardware.com>]

Nope. I have tried something very similar to this before with no luck. 
It is extremely annoying that I now cannot reproduce the previous 
message. I don't understand why it can almost work once but seemingly 
never again ??? It's very strange.



Takashi Iwai wrote:
> At Fri, 19 Jul 2002 22:56:15 +0900,
> Patrick Shirkey wrote:
> 
>>This is wierd. Using the exact same commands I cannot get jackd to load 
>>now. The card still, ahem, works, cough, with a single pcm device.
> 
> 
> how about the asoundrc attached below?
> this will map hw:2,1 and hw:2,2 as 4 channels pcm.
> i thought that these two devices correspond to 96kHz, so you need to
> specify other frequency for jackd.
> 
> 
> Takashi

----
# jackd -R -v -a -d alsa -d q4
jackd 0.37.1
Copyright 2001-2002 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details

507 waiting for signals
creating alsa driver ... q4|1024|2|48000|swmon
You appear to be using the ALSA software "plug" layer, probably
a result of using the "default" ALSA device. This is less
efficient than it could be. Consider using a ~/.asoundrc file
to define a hardware audio device rather than using the plug layer

You appear to be using the ALSA software "plug" layer, probably
a result of using the "default" ALSA device. This is less
efficient than it could be. Consider using a ~/.asoundrc file
to define a hardware audio device rather than using the plug layer

new client: alsa_pcm, id = 1 type 1 @ 0x8067490 fd = 14
port alsa_pcm:in_1 buf shm key 0x28441bd5 at offset 4096 bi = 0x8066860
registered port alsa_pcm:in_1, offset = 4096
port alsa_pcm:in_2 buf shm key 0x28441bd5 at offset 8192 bi = 0x8066870
registered port alsa_pcm:in_2, offset = 8192
registered port alsa_pcm:out_1, offset = 0
registered port alsa_pcm:out_2, offset = 0
-- jack_rechain_graph():
client alsa_pcm: inprocess client, execution_order=0.
jackd: pcm.c:1925: snd_pcm_area_silence: Assertion `0' failed.

# jackd watchdog: timeout - killing jackd

# jackd -R -v -a -d alsa -d quattro
jackd 0.37.1
Copyright 2001-2002 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details

creating alsa driver ... quattro|1024|2|48000|swmon
ALSA: mmap-based access is not possible for the capture stream of this 
audio int
erface514 waiting for signals

ALSA: cannot configure capture channel
cannot load driver module alsa
jack main caught signal 15

----

-- 
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.boosthardware.com/LAU/guide/
========================================



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf