From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0002159]: ac3 passthrough not working on recent versions
Date: Sat, 17 Jun 2006 14:25:04 +0200 [thread overview]
Message-ID: <3a8a50d8c8be286bf31b2a85bca5aaef@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2159>
======================================================================
Reported By: nikke
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2159
Category: PCI - ymfpci
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Debian
Kernel Version: 2.6.15
======================================================================
Date Submitted: 05-24-2006 23:44 CEST
Last Modified: 06-17-2006 14:25 CEST
======================================================================
Summary: ac3 passthrough not working on recent versions
Description:
Using the following AC3 passthrough with mplayer works:
Linux 2.4.31
alsa-driver 1.0.8-7 (debian stable packaged)
Using Linux 2.6.15 (both with alsa-driver 1.10rc3 that ships with the
kernel and
alsa-driver 1.0.11) it doesn't work. The reciever just says "unlock" and
stays quiet.
The only change is booting with different kernels, no other config or
hardware is touched, so this must be a driver regression.
The card is YMF-754 based, connected with coax spdif to my HK reciever.
If you need more info, just tell me and I'll dig it up.
======================================================================
----------------------------------------------------------------------
Raymond - 06-17-06 11:02
----------------------------------------------------------------------
Mimosius
There is a patch which supposed to fix AC3 output
http://hg-mirror.alsa-project.org/alsa-kernel?cmd=changeset;node=fac92b1b0699;style=gitweb
Do this patch fix the problem ?
However there is another patch which add an module parameter
MODULE_PARM_DESC(rear_swap, "Swap rear channels (must be enabled for
correct IEC958 (S/PDIF)) output");
http://hg-mirror.alsa-project.org/alsa-kernel?cmd=changeset;node=2e21f4940a0f;style=gitweb
----------------------------------------------------------------------
Raymond - 06-17-06 14:25
----------------------------------------------------------------------
Are you sure that your patch in
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1447 does not break AC3
pass through ?
It seem that there are 3 sources for SPDIF out
1) AC3
2) Digital Mixer
3) SPDIF in
Issue History
Date Modified Username Field Change
======================================================================
05-24-06 23:44 nikke New Issue
05-24-06 23:44 nikke Distribution => Debian
05-24-06 23:44 nikke Kernel Version => 2.6.15
05-24-06 23:47 nikke Issue Monitored: nikke
06-02-06 04:23 Raymond Note Added: 0010045
06-02-06 04:25 Raymond Note Edited: 0010045
06-12-06 13:14 Mimosius Issue Monitored: Mimosius
06-14-06 22:32 nikke Note Added: 0010216
06-15-06 02:18 Raymond Note Added: 0010221
06-15-06 02:27 Raymond Note Edited: 0010221
06-15-06 11:03 Mimosius Note Added: 0010237
06-15-06 23:43 nikke Note Added: 0010246
06-16-06 13:01 Mimosius Note Added: 0010250
06-16-06 13:16 Mimosius Note Edited: 0010250
06-16-06 13:26 Raymond Note Added: 0010251
06-16-06 13:31 Raymond Note Edited: 0010251
06-16-06 13:37 Mimosius Note Added: 0010252
06-16-06 16:25 Raymond Note Added: 0010255
06-17-06 01:17 nikke Note Added: 0010262
06-17-06 02:43 Raymond Note Edited: 0010251
06-17-06 10:21 Raymond Note Added: 0010266
06-17-06 10:24 Raymond Note Edited: 0010266
06-17-06 11:02 Raymond Note Added: 0010267
06-17-06 14:25 Raymond Note Added: 0010268
======================================================================
next reply other threads:[~2006-06-17 12:25 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-17 12:25 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-08-04 0:35 [ALSA - driver 0002159]: ac3 passthrough not working on recent versions bugtrack
2006-08-03 12:15 bugtrack
2006-06-20 2:56 bugtrack
2006-06-19 20:10 bugtrack
2006-06-19 19:43 bugtrack
2006-06-19 11:33 bugtrack
2006-06-19 17:00 ` Glen Masgai
2006-06-19 11:11 bugtrack
2006-06-17 16:22 bugtrack
2006-06-17 14:10 bugtrack
2006-06-17 13:16 bugtrack
2006-06-17 9:02 bugtrack
2006-06-17 8:21 bugtrack
2006-06-16 23:17 bugtrack
2006-06-16 14:25 bugtrack
2006-06-16 11:37 bugtrack
2006-06-16 11:26 bugtrack
2006-06-16 11:01 bugtrack
2006-06-15 21:43 bugtrack
2006-06-15 9:03 bugtrack
2006-06-15 0:18 bugtrack
2006-06-14 20:32 bugtrack
2006-06-02 2:23 bugtrack
2006-05-24 21:44 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3a8a50d8c8be286bf31b2a85bca5aaef@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox