From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: Cezary Rojewski <cezary.rojewski@intel.com>,
alsa-devel@alsa-project.org, tiwai@suse.com
Cc: "Kai Vehmanen" <kai.vehmanen@linux.intel.com>,
"Bard Liao" <yung-chuan.liao@linux.intel.com>,
"Ranjani Sridharan" <ranjani.sridharan@linux.intel.com>,
hdegoede@redhat.com, broonie@kernel.org,
amadeuszx.slawinski@linux.intel.com,
"Péter Ujfalusi" <peter.ujfalusi@linux.intel.com>
Subject: Re: [PATCH 6/9] ALSA: hda: Fix page fault in snd_hda_codec_shutdown()
Date: Fri, 15 Jul 2022 13:16:14 -0500 [thread overview]
Message-ID: <3c40df55-3aee-1e08-493b-7b30cd84dc00@linux.intel.com> (raw)
In-Reply-To: <20220706120230.427296-7-cezary.rojewski@intel.com>
On 7/6/22 07:02, Cezary Rojewski wrote:
> If early probe of HDAudio bus driver fails e.g.: due to missing
> firmware file, snd_hda_codec_shutdown() ends in manipulating
> uninitialized codec->pcm_list_head causing page fault.
>
> Iinitialization of HDAudio codec in ASoC is split in two:
> - snd_hda_codec_device_init()
> - snd_hda_codec_device_new()
>
> snd_hda_codec_device_init() is called during probe_codecs() by HDAudio
> bus driver while snd_hda_codec_device_new() is called by
> codec-component's ->probe(). The second call will not happen until all
> components required by related sound card are present within the ASoC
> framework. With firmware failing to load during the PCI's deferred
> initialization i.e.: probe_work(), no platform components are ever
> registered. HDAudio codec enumeration is done at that point though, so
> the codec components became registered to ASoC framework, calling
> snd_hda_codec_device_init() in the process.
>
> Now, during platform reboot snd_hda_codec_shutdown() is called for every
> codec found on the HDAudio bus causing oops if any of them has not
> completed both of their initialization steps. Relocating field
> initialization fixes the issue.
>
> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
This patch causes an across-the-board regression on all SOF platforms
using an HDaudio or iDISP codec. Only 'nocodec' platforms are
unaffected, see results at
https://sof-ci.01.org/linuxpr/PR3763/build394/devicetest/
Reverting this commit seems to fix the issue.
Upstream merge:
https://github.com/thesofproject/linux/pull/3763
Issue and bisect results
https://github.com/thesofproject/linux/issues/3764
I don't know what this was supposed to fix on the shutdown path but it's
clearly having side effects on the probe/init path.
> ---
> sound/pci/hda/hda_codec.c | 41 +++++++++++++++++++--------------------
> 1 file changed, 20 insertions(+), 21 deletions(-)
>
> diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
> index 75e85bf58681..677d0a78f19c 100644
> --- a/sound/pci/hda/hda_codec.c
> +++ b/sound/pci/hda/hda_codec.c
> @@ -930,8 +930,28 @@ snd_hda_codec_device_init(struct hda_bus *bus, unsigned int codec_addr,
> }
>
> codec->bus = bus;
> + codec->depop_delay = -1;
> + codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
> + codec->core.dev.release = snd_hda_codec_dev_release;
> + codec->core.exec_verb = codec_exec_verb;
> codec->core.type = HDA_DEV_LEGACY;
>
> + mutex_init(&codec->spdif_mutex);
> + mutex_init(&codec->control_mutex);
> + snd_array_init(&codec->mixers, sizeof(struct hda_nid_item), 32);
> + snd_array_init(&codec->nids, sizeof(struct hda_nid_item), 32);
> + snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16);
> + snd_array_init(&codec->driver_pins, sizeof(struct hda_pincfg), 16);
> + snd_array_init(&codec->cvt_setups, sizeof(struct hda_cvt_setup), 8);
> + snd_array_init(&codec->spdif_out, sizeof(struct hda_spdif_out), 16);
> + snd_array_init(&codec->jacktbl, sizeof(struct hda_jack_tbl), 16);
> + snd_array_init(&codec->verbs, sizeof(struct hda_verb *), 8);
> + INIT_LIST_HEAD(&codec->conn_list);
> + INIT_LIST_HEAD(&codec->pcm_list_head);
> + INIT_DELAYED_WORK(&codec->jackpoll_work, hda_jackpoll_work);
> + refcount_set(&codec->pcm_ref, 1);
> + init_waitqueue_head(&codec->remove_sleep);
> +
> return codec;
> }
> EXPORT_SYMBOL_GPL(snd_hda_codec_device_init);
> @@ -984,29 +1004,8 @@ int snd_hda_codec_device_new(struct hda_bus *bus, struct snd_card *card,
> if (snd_BUG_ON(codec_addr > HDA_MAX_CODEC_ADDRESS))
> return -EINVAL;
>
> - codec->core.dev.release = snd_hda_codec_dev_release;
> - codec->core.exec_verb = codec_exec_verb;
> -
> codec->card = card;
> codec->addr = codec_addr;
> - mutex_init(&codec->spdif_mutex);
> - mutex_init(&codec->control_mutex);
> - snd_array_init(&codec->mixers, sizeof(struct hda_nid_item), 32);
> - snd_array_init(&codec->nids, sizeof(struct hda_nid_item), 32);
> - snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16);
> - snd_array_init(&codec->driver_pins, sizeof(struct hda_pincfg), 16);
> - snd_array_init(&codec->cvt_setups, sizeof(struct hda_cvt_setup), 8);
> - snd_array_init(&codec->spdif_out, sizeof(struct hda_spdif_out), 16);
> - snd_array_init(&codec->jacktbl, sizeof(struct hda_jack_tbl), 16);
> - snd_array_init(&codec->verbs, sizeof(struct hda_verb *), 8);
> - INIT_LIST_HEAD(&codec->conn_list);
> - INIT_LIST_HEAD(&codec->pcm_list_head);
> - refcount_set(&codec->pcm_ref, 1);
> - init_waitqueue_head(&codec->remove_sleep);
> -
> - INIT_DELAYED_WORK(&codec->jackpoll_work, hda_jackpoll_work);
> - codec->depop_delay = -1;
> - codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
>
> #ifdef CONFIG_PM
> codec->power_jiffies = jiffies;
next prev parent reply other threads:[~2022-07-15 18:17 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-06 12:02 [PATCH 0/9] ALSA: hda: Codec-reload bug fixes and cleanups Cezary Rojewski
2022-07-06 12:02 ` [PATCH 1/9] ALSA: hda: Do not unset preset when cleaning up codec Cezary Rojewski
2022-07-09 16:34 ` Takashi Iwai
2022-07-11 8:25 ` Cezary Rojewski
2022-07-11 14:12 ` Takashi Iwai
2022-07-12 9:42 ` Cezary Rojewski
2022-07-12 10:46 ` Takashi Iwai
2022-07-12 10:58 ` Cezary Rojewski
2022-07-15 14:55 ` Takashi Iwai
2023-01-17 14:45 ` Cezary Rojewski
2023-01-17 14:51 ` Takashi Iwai
2022-07-06 12:02 ` [PATCH 2/9] ALSA: hda: Fix null-ptr-deref when i915 fails and hdmi is denylisted Cezary Rojewski
2022-07-06 12:02 ` [PATCH 3/9] ALSA: hda: Make device usage_count consistent across subsequent probing Cezary Rojewski
2022-07-06 12:02 ` [PATCH 4/9] ALSA: hda: Fix put_device() inconsistency in error path Cezary Rojewski
2022-07-06 12:02 ` [PATCH 5/9] ALSA: hda: Skip event processing for unregistered codecs Cezary Rojewski
2022-07-09 16:47 ` Takashi Iwai
2022-07-15 14:27 ` Takashi Iwai
2022-07-06 12:02 ` [PATCH 6/9] ALSA: hda: Fix page fault in snd_hda_codec_shutdown() Cezary Rojewski
2022-07-15 18:16 ` Pierre-Louis Bossart [this message]
2022-07-15 18:23 ` Takashi Iwai
2022-07-17 10:05 ` Cezary Rojewski
2022-07-06 12:02 ` [PATCH 7/9] ALSA: hda: Reset all SIE bits in INTCTL Cezary Rojewski
2022-07-06 12:02 ` [PATCH 8/9] ALSA: hda: Remove unused macro definition Cezary Rojewski
2022-07-06 12:02 ` [PATCH 9/9] ALSA: hda/realtek: Remove redundant init_hook() in alc_default_init() Cezary Rojewski
2022-07-09 16:46 ` Takashi Iwai
2022-07-11 8:12 ` Cezary Rojewski
2022-07-09 16:50 ` [PATCH 0/9] ALSA: hda: Codec-reload bug fixes and cleanups Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3c40df55-3aee-1e08-493b-7b30cd84dc00@linux.intel.com \
--to=pierre-louis.bossart@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=amadeuszx.slawinski@linux.intel.com \
--cc=broonie@kernel.org \
--cc=cezary.rojewski@intel.com \
--cc=hdegoede@redhat.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=peter.ujfalusi@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
--cc=tiwai@suse.com \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox