From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - tools 0002136]: ice1724gt support for Envy24Control
Date: Sat, 22 Jul 2006 22:57:30 +0200 [thread overview]
Message-ID: <3ca9303220e4f34a6c95a89e9853dec0@bugtrack.alsa-project.org> (raw)
The following issue has been set as RELATED TO issue 0002293.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2136>
======================================================================
Reported By: hlabs
Assigned To:
======================================================================
Project: ALSA - tools
Issue ID: 2136
Category: envy24control
Reproducibility: always
Severity: major
Priority: normal
Status: new
======================================================================
Date Submitted: 05-19-2006 21:21 CEST
Last Modified: 07-22-2006 22:56 CEST
======================================================================
Summary: ice1724gt support for Envy24Control
Description:
What about ice1724gt support for Envy24Control util ?
My card is M-Audio Revolution 5.1
Envy24Control says : no Ice1712 found.
All modules loads fine but no sound at all :(
Vanilla kernel 2.6.16 with ALSA 1.0.11 .
Trial OSS works fine .
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
related to 0001831 envy24control does not work with Hercul...
related to 0002293 M-Audio Delta 192 - Missing controls
======================================================================
----------------------------------------------------------------------
gineera - 05-19-06 23:56
----------------------------------------------------------------------
Envy24control just provides a convenient way to access the Alsa controls.
If sound is not working, use alsamixer (from a terminal window) and you
should have all the controls available. Channels are usually muted and at
zero level by default. If it doesn't work using alsamixer, the underlying
driver may be at fault.
Envy24control does not add any more controls although it gives signal
meters and is easier to use, and is quite separate from the sound driver.
It is quite possible that it doesn't support 1724 chips (yet?).
----------------------------------------------------------------------
rlrevell - 05-20-06 00:00
----------------------------------------------------------------------
Yes, it's a known issue that envy24 control does not support ICE1724.
However this is interesting, it sounds like it could be trivial to fix.
----------------------------------------------------------------------
hlabs - 05-20-06 18:55
----------------------------------------------------------------------
It doesn't work using alsamixer.
All controls unmuted and routed to PCM out.
Still no sound :( Even via oss emulation.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Revolution51 [M Audio Revolution-5.1], device 0: ICE1724
[ICE1724]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Revolution51 [M Audio Revolution-5.1], device 1: IEC1724 IEC958
[IEC1724 IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Revolution51 [M Audio Revolution-5.1], device 2: ICE1724 Surrounds
[ICE1724 Surround PCM]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
----------------------------------------------------------------------
hlabs - 05-24-06 15:09
----------------------------------------------------------------------
After some tweaks in .asoundrc file i got front out working but not
others.
I think this is ice1724 driver issue...
----------------------------------------------------------------------
cruiseoveride - 07-22-06 02:58
----------------------------------------------------------------------
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1831
Issue History
Date Modified Username Field Change
======================================================================
05-19-06 21:21 hlabs New Issue
05-19-06 21:22 hlabs Issue Monitored: hlabs
05-19-06 23:55 gineera Note Added: 0009880
05-19-06 23:56 gineera Note Edited: 0009880
05-20-06 00:00 rlrevell Note Added: 0009881
05-20-06 18:55 hlabs Note Added: 0009890
05-24-06 15:09 hlabs Note Added: 0009957
06-08-06 16:48 drycellbattery Issue Monitored: drycellbattery
07-22-06 02:58 cruiseoveride Note Added: 0011160
07-22-06 22:56 rlrevell Relationship added related to 0001831
07-22-06 22:57 rlrevell Relationship added related to 0002293
======================================================================
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
next reply other threads:[~2006-07-22 20:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-22 20:57 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-07-22 20:56 [ALSA - tools 0002136]: ice1724gt support for Envy24Control bugtrack
2006-07-22 0:58 bugtrack
2006-05-24 13:09 bugtrack
2006-05-20 16:55 bugtrack
2006-05-19 22:00 bugtrack
2006-05-19 21:55 bugtrack
2006-05-19 19:21 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3ca9303220e4f34a6c95a89e9853dec0@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox