From: SF Markus Elfring <elfring@users.sourceforge.net>
To: alsa-devel@alsa-project.org, Clemens Ladisch <clemens@ladisch.de>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: kernel-janitors@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/3] ALSA: bebob: Adjust six checks for null pointers
Date: Wed, 6 Sep 2017 12:23:22 +0200 [thread overview]
Message-ID: <3ef7ccac-9bab-4030-da89-92f5c488e8bf@users.sourceforge.net> (raw)
In-Reply-To: <85f95150-9cec-7a53-7692-837ba543e1ec@users.sourceforge.net>
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 6 Sep 2017 11:48:44 +0200
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The script “checkpatch.pl” pointed information out like the following.
Comparison to NULL could be written …
Thus fix the affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
sound/firewire/bebob/bebob_stream.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/firewire/bebob/bebob_stream.c b/sound/firewire/bebob/bebob_stream.c
index bc9e42b6368e..211ff43207d6 100644
--- a/sound/firewire/bebob/bebob_stream.c
+++ b/sound/firewire/bebob/bebob_stream.c
@@ -268,7 +268,7 @@ map_data_channels(struct snd_bebob *bebob, struct amdtp_stream *s)
* use the maximum length of FCP.
*/
buf = kzalloc(256, GFP_KERNEL);
- if (buf == NULL)
+ if (!buf)
return -ENOMEM;
if (s == &bebob->tx_stream)
@@ -472,7 +472,7 @@ break_both_connections(struct snd_bebob *bebob)
bebob->connected = false;
/* These models seems to be in transition state for a longer time. */
- if (bebob->maudio_special_quirk != NULL)
+ if (bebob->maudio_special_quirk)
msleep(200);
}
@@ -496,7 +496,7 @@ start_stream(struct snd_bebob *bebob, struct amdtp_stream *stream,
conn = &bebob->out_conn;
/* channel mapping */
- if (bebob->maudio_special_quirk == NULL) {
+ if (!bebob->maudio_special_quirk) {
err = map_data_channels(bebob, stream);
if (err < 0)
goto end;
@@ -611,7 +611,7 @@ int snd_bebob_stream_start_duplex(struct snd_bebob *bebob, unsigned int rate)
*
* For firmware customized by M-Audio, refer to next NOTE.
*/
- if (bebob->maudio_special_quirk == NULL) {
+ if (!bebob->maudio_special_quirk) {
err = rate_spec->set(bebob, rate);
if (err < 0) {
dev_err(&bebob->unit->device,
@@ -637,7 +637,7 @@ int snd_bebob_stream_start_duplex(struct snd_bebob *bebob, unsigned int rate)
* The firmware customized by M-Audio uses these commands to
* start transmitting stream. This is not usual way.
*/
- if (bebob->maudio_special_quirk != NULL) {
+ if (bebob->maudio_special_quirk) {
err = rate_spec->set(bebob, rate);
if (err < 0) {
dev_err(&bebob->unit->device,
@@ -794,7 +794,7 @@ fill_stream_formations(struct snd_bebob *bebob, enum avc_bridgeco_plug_dir dir,
int err;
buf = kmalloc(FORMAT_MAXIMUM_LENGTH, GFP_KERNEL);
- if (buf == NULL)
+ if (!buf)
return -ENOMEM;
if (dir == AVC_BRIDGECO_PLUG_DIR_IN)
--
2.14.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2017-09-06 10:23 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-06 10:21 [PATCH 0/3] ALSA: BeBoB: Fine-tuning for six function implementations SF Markus Elfring
2017-09-06 10:22 ` [PATCH 1/3] ALSA: bebob: Use common error handling code in snd_bebob_stream_start_duplex() SF Markus Elfring
2017-09-24 3:50 ` Takashi Sakamoto
2017-09-24 7:06 ` SF Markus Elfring
2017-09-26 23:30 ` Takashi Sakamoto
2017-09-27 6:38 ` SF Markus Elfring
2017-09-27 11:09 ` Takashi Sakamoto
2017-09-06 10:23 ` SF Markus Elfring [this message]
2017-09-06 10:24 ` [PATCH 3/3] ALSA: bebob: Improve a size determination in parse_stream_formation() SF Markus Elfring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3ef7ccac-9bab-4030-da89-92f5c488e8bf@users.sourceforge.net \
--to=elfring@users.sourceforge.net \
--cc=alsa-devel@alsa-project.org \
--cc=clemens@ladisch.de \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).