From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: Vinod Koul <vinod.koul@intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: ALSA <alsa-devel@alsa-project.org>,
Charles Keepax <ckeepax@opensource.cirrus.com>,
Sudheer Papothi <spapothi@codeaurora.org>,
Takashi <tiwai@suse.de>,
plai@codeaurora.org, LKML <linux-kernel@vger.kernel.org>,
patches.audio@intel.com, Mark <broonie@kernel.org>,
srinivas.kandagatla@linaro.org,
Sagar Dharia <sdharia@codeaurora.org>,
alan@linux.intel.com
Subject: Re: [PATCH v4 00/15] soundwire: Add a new SoundWire subsystem
Date: Fri, 1 Dec 2017 18:24:10 -0600 [thread overview]
Message-ID: <404dd97d-767d-1f93-949b-487dcca96256@linux.intel.com> (raw)
In-Reply-To: <1512122177-2889-1-git-send-email-vinod.koul@intel.com>
On 12/1/17 3:56 AM, Vinod Koul wrote:
> This patch series adds a new SoundWire subsystem which implements a
> new MIPI bus protocol 'SoundWire'.
Sorry for the late feedback Vinod and team.
Overall the code looks very good to me and aligned with the MIPI specs,
there are only a couple of points that were added (or some code not
removed) during the code cleanups, e.g.
- device12..14 should not be used
- device_property handling (master/controller confusion?)
- error cases on transfers
- spec race condition on interrupt clear (not bad but to be discussed
further)
- some comments and code nit-picks
This is starting to get into second-order reviews really, which shows
this is becoming quite mature. And for the record this work isn't just
scratching the surface, it helped identify a couple of documentation
issues in the MIPI specs which will lead to clarifications in future
revisions.
Looking forward to a v5 ;-)
Thanks,
-Pierre
>
> The SoundWire protocol is a robust, scalable, low complexity, low
> power, low latency, two-pin (clock and data) multi-drop bus that
> allows for the transfer of multiple audio streams and embedded
> control/commands. SoundWire provides synchronization capabilities
> and supports both PCM and PDM, multichannel data, isochronous and
> asynchronous modes.
>
> This series adds SoundWire Bus, IO transfers, DisCo (Discovery and
> Configuration) sysfs interface, regmap and Documentation summary
>
> This patch series is also available on
> git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire.git topic/patch_v4
>
> v3: https://lkml.org/lkml/2017/11/30/160
> v2: https://lkml.org/lkml/2017/11/10/216
> v1: https://lkml.org/lkml/2017/10/18/1030
> RFC: https://lkml.org/lkml/2016/10/21/395
>
> Changes in v4:
> - Remove text licenses and add SPDX tags only with C99 style comments
> - make bus_type code as GPL v2.0 only
>
> Changes in v3:
> - Update the kernel-doc styles and fix included headers for files
> - handle dev_pm_domain_attach() for defered probe
> - remove OF placeholders
> - change regmap license to GPLv2 only
>
> Changes in v2:
> - move documentation into driver-api and do rst conversion
> - fix documentation comments
> - add SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) to all
> source files
> - rework the transfer logic and paging logic as commented on v1
> - remove dummy sysfs fns
> - registration checks and fixes
> - remove slave check for regamp as that turned superfluous
> - remove depends SoundWire symbol
> - make modalias api arg const
> - use bitmap for tracking assigned
> - add counter for report present tracking
> todo: add the dt-bindings
>
> Sanyog Kale (4):
> Documentation: Add SoundWire summary
> soundwire: Add SoundWire MIPI defined registers
> soundwire: Add Slave status handling helpers
> soundwire: cdns: Add sdw_master_ops and IO transfer support
>
> Vinod Koul (11):
> soundwire: Add SoundWire bus type
> soundwire: Add Master registration
> soundwire: Add MIPI DisCo property helpers
> soundwire: Add IO transfer
> regmap: Add SoundWire bus support
> soundwire: Add slave status handling
> soundwire: Add sysfs for SoundWire DisCo properties
> soundwire: cdns: Add cadence library
> soundwire: intel: Add Intel Master driver
> soundwire: intel: Add Intel init module
> MAINTAINERS: Add SoundWire entry
>
> Documentation/driver-api/index.rst | 1 +
> Documentation/driver-api/soundwire/index.rst | 15 +
> Documentation/driver-api/soundwire/summary.rst | 205 ++++++
> MAINTAINERS | 10 +
> drivers/Kconfig | 2 +
> drivers/Makefile | 1 +
> drivers/base/regmap/Kconfig | 4 +
> drivers/base/regmap/Makefile | 1 +
> drivers/base/regmap/regmap-sdw.c | 92 +++
> drivers/soundwire/Kconfig | 37 +
> drivers/soundwire/Makefile | 18 +
> drivers/soundwire/bus.c | 958 +++++++++++++++++++++++++
> drivers/soundwire/bus.h | 74 ++
> drivers/soundwire/bus_type.c | 193 +++++
> drivers/soundwire/cadence_master.c | 749 +++++++++++++++++++
> drivers/soundwire/cadence_master.h | 48 ++
> drivers/soundwire/intel.c | 347 +++++++++
> drivers/soundwire/intel.h | 23 +
> drivers/soundwire/intel_init.c | 198 +++++
> drivers/soundwire/mipi_disco.c | 374 ++++++++++
> drivers/soundwire/slave.c | 115 +++
> drivers/soundwire/sysfs.c | 343 +++++++++
> include/linux/mod_devicetable.h | 6 +
> include/linux/regmap.h | 37 +
> include/linux/soundwire/sdw.h | 487 +++++++++++++
> include/linux/soundwire/sdw_intel.h | 24 +
> include/linux/soundwire/sdw_registers.h | 194 +++++
> include/linux/soundwire/sdw_type.h | 19 +
> scripts/mod/devicetable-offsets.c | 4 +
> scripts/mod/file2alias.c | 15 +
> 30 files changed, 4594 insertions(+)
> create mode 100644 Documentation/driver-api/soundwire/index.rst
> create mode 100644 Documentation/driver-api/soundwire/summary.rst
> create mode 100644 drivers/base/regmap/regmap-sdw.c
> create mode 100644 drivers/soundwire/Kconfig
> create mode 100644 drivers/soundwire/Makefile
> create mode 100644 drivers/soundwire/bus.c
> create mode 100644 drivers/soundwire/bus.h
> create mode 100644 drivers/soundwire/bus_type.c
> create mode 100644 drivers/soundwire/cadence_master.c
> create mode 100644 drivers/soundwire/cadence_master.h
> create mode 100644 drivers/soundwire/intel.c
> create mode 100644 drivers/soundwire/intel.h
> create mode 100644 drivers/soundwire/intel_init.c
> create mode 100644 drivers/soundwire/mipi_disco.c
> create mode 100644 drivers/soundwire/slave.c
> create mode 100644 drivers/soundwire/sysfs.c
> create mode 100644 include/linux/soundwire/sdw.h
> create mode 100644 include/linux/soundwire/sdw_intel.h
> create mode 100644 include/linux/soundwire/sdw_registers.h
> create mode 100644 include/linux/soundwire/sdw_type.h
>
next prev parent reply other threads:[~2017-12-02 0:24 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-01 9:56 [PATCH v4 00/15] soundwire: Add a new SoundWire subsystem Vinod Koul
2017-12-01 9:56 ` [PATCH v4 01/15] Documentation: Add SoundWire summary Vinod Koul
2017-12-01 9:56 ` [PATCH v4 02/15] soundwire: Add SoundWire bus type Vinod Koul
2017-12-01 9:56 ` [PATCH v4 03/15] soundwire: Add Master registration Vinod Koul
2017-12-01 22:10 ` [alsa-devel] " Pierre-Louis Bossart
2017-12-03 16:41 ` Vinod Koul
2017-12-04 2:44 ` Pierre-Louis Bossart
2017-12-04 2:59 ` Vinod Koul
2017-12-01 9:56 ` [PATCH v4 04/15] soundwire: Add MIPI DisCo property helpers Vinod Koul
2017-12-01 22:49 ` [alsa-devel] " Pierre-Louis Bossart
2017-12-03 16:52 ` Vinod Koul
2017-12-04 2:50 ` Pierre-Louis Bossart
2017-12-01 9:56 ` [PATCH v4 05/15] soundwire: Add SoundWire MIPI defined registers Vinod Koul
2017-12-01 9:56 ` [PATCH v4 06/15] soundwire: Add IO transfer Vinod Koul
2017-12-01 23:27 ` [alsa-devel] " Pierre-Louis Bossart
2017-12-03 17:04 ` Vinod Koul
2017-12-04 3:01 ` [alsa-devel] " Pierre-Louis Bossart
2017-12-05 6:31 ` Vinod Koul
2017-12-05 13:43 ` Pierre-Louis Bossart
2017-12-05 14:48 ` Pierre-Louis Bossart
2017-12-06 5:58 ` [alsa-devel] " Vinod Koul
2017-12-06 13:32 ` Pierre-Louis Bossart
2017-12-06 14:44 ` [alsa-devel] " Vinod Koul
2017-12-01 9:56 ` [PATCH v4 07/15] regmap: Add SoundWire bus support Vinod Koul
2017-12-01 9:56 ` [PATCH v4 08/15] soundwire: Add Slave status handling helpers Vinod Koul
2017-12-01 23:36 ` [alsa-devel] " Pierre-Louis Bossart
2017-12-03 17:08 ` Vinod Koul
2017-12-04 3:07 ` Pierre-Louis Bossart
2017-12-04 3:13 ` Vinod Koul
2017-12-01 9:56 ` [PATCH v4 09/15] soundwire: Add slave status handling Vinod Koul
2017-12-01 23:52 ` [alsa-devel] " Pierre-Louis Bossart
2017-12-03 17:11 ` Vinod Koul
2017-12-04 3:11 ` [alsa-devel] " Pierre-Louis Bossart
2017-12-04 3:21 ` Vinod Koul
2017-12-04 3:52 ` Pierre-Louis Bossart
2017-12-06 9:44 ` Vinod Koul
2017-12-01 9:56 ` [PATCH v4 10/15] soundwire: Add sysfs for SoundWire DisCo properties Vinod Koul
2017-12-01 9:56 ` [PATCH v4 11/15] soundwire: cdns: Add cadence library Vinod Koul
2017-12-01 9:56 ` [PATCH v4 12/15] soundwire: cdns: Add sdw_master_ops and IO transfer support Vinod Koul
2017-12-02 0:02 ` Pierre-Louis Bossart
2017-12-03 17:10 ` Vinod Koul
2017-12-01 9:56 ` [PATCH v4 13/15] soundwire: intel: Add Intel Master driver Vinod Koul
2017-12-01 9:56 ` [PATCH v4 14/15] soundwire: intel: Add Intel init module Vinod Koul
2017-12-01 9:56 ` [PATCH v4 15/15] MAINTAINERS: Add SoundWire entry Vinod Koul
2017-12-02 0:24 ` Pierre-Louis Bossart [this message]
2017-12-03 17:12 ` [PATCH v4 00/15] soundwire: Add a new SoundWire subsystem Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=404dd97d-767d-1f93-949b-487dcca96256@linux.intel.com \
--to=pierre-louis.bossart@linux.intel.com \
--cc=alan@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.cirrus.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches.audio@intel.com \
--cc=plai@codeaurora.org \
--cc=sdharia@codeaurora.org \
--cc=spapothi@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=tiwai@suse.de \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).