Re: hdsploader on ppc

[peter plessas <plessas@mur.at>]

Hi!

Thanks for the hint, as i checked again, i see that i am indeed using 
alsa-drivers-1.0.9rc1.

 From what i found out so far, this might still be an endianess issue.
What about the firmware itself? Could there be a byte-swapping problem?

Thanks for any help!
I would so much like to solve this, it's been a year or so i have been 
revisiting this problem.

regards, Peter


Takashi Iwai wrote:
> At Sun, 20 Mar 2005 01:29:20 +0100,
> peter plessas wrote:
> 
>>Dear list,
>>
>>this is a bit complicated, due to big/little endian issues, perhaps.
>>I am trying to load the firmware into my hdsp pcmcia card.
>>
>>I am getting the fifo timeout:
>>
>>peter:~# hdsploader
>>hdsploader - firmware loader for RME Hammerfall DSP cards
>>Looking for HDSP + Multiface or Digiface cards :
>>Card 0 : PowerMac Screamer Rev 0
>>Card 1 : RME Hammerfall DSP at 0xf3000000, irq 58
>>Upload firmware for card hw:1
>>Hwdep ioctl error on card hw:1 : Input/output error.
>>
>>I am using debian testing, running a 2.6.8 kernel with manually compiled 
>>1.0.8 alsa drivers on a G3 powerpc laptop.
> 
> 
> hdsp support on ALSA 1.0.8 seems buggy.
> Please try 1.0.9rc1.
> 
> 
> Takashi


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click