Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylylov <sshtylyov@ru.mvista.com>
To: alsa-devel@lists.sourceforge.net, dan@embeddededge.com,
	ralf@linux-mips.org, ppopov@linux-mips.org
Cc: Konstantin Baidarov <kbaidarov@dev.rtsoft.ru>
Subject: Au1550 OSS driver issues
Date: Thu, 06 Oct 2005 17:02:12 +0400	[thread overview]
Message-ID: <43452054.2090305@ru.mvista.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 988 bytes --]

Hello.

     We have found some issues with Au1550 AC'97 OSS driver in 2.6
(sound/oss/au1550_ac97.c), though it also should concern 2.4 driver
(drivers/sound/au1550_psc.c).
     First, we don't think that using readl() calls instead of au_readl() is
correct -- readl() is subject to byte-swapping etc., so may not work in
big-endian mode anymore and au_readl() is intended for embedded Au1550 devices
for which the byte swapping issue is resolved automagically, and BTW the same
PSC_AC97STAT register is read "both ways" in the driver. That's what the first
patch is about.
     Second, start_dac() grabs a spinlock already held by its caller, 
au1550_write(). This doesn't show up with the standard UP spinlock 
impelmentation but when the different one (mutex based) is in use, a lockup 
happens. The second patch demonstates a possible solution but here's a 
question: why there's no "symmetric" spinlock logic in start_adc(), may be 
here exits another potential issue?

WBR, Sergei


[-- Attachment #2: au1550_ac97_readl.patch --]
[-- Type: text/plain, Size: 1533 bytes --]

Index: linux/sound/oss/au1550_ac97.c
===================================================================
--- linux.orig/sound/oss/au1550_ac97.c
+++ linux/sound/oss/au1550_ac97.c
@@ -463,7 +463,7 @@ stop_dac(struct au1550_state *s)
 	/* Wait for Transmit Busy to show disabled.
 	*/
 	do {
-		stat = readl((void *)PSC_AC97STAT);
+		stat = au_readl(PSC_AC97STAT);
 		au_sync();
 	} while ((stat & PSC_AC97STAT_TB) != 0);
 
@@ -492,7 +492,7 @@ stop_adc(struct au1550_state *s)
 	/* Wait for Receive Busy to show disabled.
 	*/
 	do {
-		stat = readl((void *)PSC_AC97STAT);
+		stat = au_readl(PSC_AC97STAT);
 		au_sync();
 	} while ((stat & PSC_AC97STAT_RB) != 0);
 
@@ -542,7 +542,7 @@ set_xmit_slots(int num_channels)
 	/* Wait for Device ready.
 	*/
 	do {
-		stat = readl((void *)PSC_AC97STAT);
+		stat = au_readl(PSC_AC97STAT);
 		au_sync();
 	} while ((stat & PSC_AC97STAT_DR) == 0);
 }
@@ -574,7 +574,7 @@ set_recv_slots(int num_channels)
 	/* Wait for Device ready.
 	*/
 	do {
-		stat = readl((void *)PSC_AC97STAT);
+		stat = au_readl(PSC_AC97STAT);
 		au_sync();
 	} while ((stat & PSC_AC97STAT_DR) == 0);
 }
@@ -1989,7 +1989,7 @@ au1550_probe(void)
 	/* Wait for PSC ready.
 	*/
 	do {
-		val = readl((void *)PSC_AC97STAT);
+		val = au_readl(PSC_AC97STAT);
 		au_sync();
 	} while ((val & PSC_AC97STAT_SR) == 0);
 
@@ -2012,7 +2012,7 @@ au1550_probe(void)
 	/* Wait for Device ready.
 	*/
 	do {
-		val = readl((void *)PSC_AC97STAT);
+		val = au_readl(PSC_AC97STAT);
 		au_sync();
 	} while ((val & PSC_AC97STAT_DR) == 0);
 


[-- Attachment #3: au1550_ac97-spinlock.patch --]
[-- Type: text/plain, Size: 1574 bytes --]

Index: linux/sound/oss/au1550_ac97.c
===================================================================
--- linux.orig/sound/oss/au1550_ac97.c
+++ linux/sound/oss/au1550_ac97.c
@@ -74,6 +74,9 @@
 
 #define err(format, arg...) printk(KERN_ERR format "\n" , ## arg)
 
+#define START_DAC_NOSL 1
+#define START_DAC_SL 0
+
 /* Boot options
  * 0 = no VRA, 1 = use VRA if codec supports it
  */
@@ -580,7 +583,7 @@ set_recv_slots(int num_channels)
 }
 
 static void
-start_dac(struct au1550_state *s)
+start_dac(struct au1550_state *s, int no_sl)
 {
 	struct dmabuf  *db = &s->dma_dac;
 	unsigned long   flags;
@@ -588,7 +591,8 @@ start_dac(struct au1550_state *s)
 	if (!db->stopped)
 		return;
 
-	spin_lock_irqsave(&s->lock, flags);
+	if( !no_sl )
+		spin_lock_irqsave(&s->lock, flags);
 
 	set_xmit_slots(db->num_channels);
 	au_writel(PSC_AC97PCR_TC, PSC_AC97PCR);
@@ -600,7 +604,8 @@ start_dac(struct au1550_state *s)
 
 	db->stopped = 0;
 
-	spin_unlock_irqrestore(&s->lock, flags);
+	if( !no_sl )
+		spin_unlock_irqrestore(&s->lock, flags);
 }
 
 static void
@@ -1182,7 +1187,7 @@ au1550_write(struct file *file, const ch
 				db->nextOut -= db->dmasize;
 			db->total_bytes += db->dma_fragsize;
 			if (db->dma_qcount == 0)
-				start_dac(s);
+				start_dac(s,START_DAC_NOSL);
 			db->dma_qcount++;
 		}
 		spin_unlock_irqrestore(&s->lock, flags);
@@ -1578,7 +1583,7 @@ au1550_ioctl(struct inode *inode, struct
 		}
 		if (file->f_mode & FMODE_WRITE) {
 			if (val & PCM_ENABLE_OUTPUT)
-				start_dac(s);
+				start_dac(s,START_DAC_SL);
 			else
 				stop_dac(s);
 		}


             reply	other threads:[~2005-10-06 13:02 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-10-06 13:02 Sergei Shtylylov [this message]
2005-10-06 17:47 ` Au1550 OSS driver issues Dan Malek
2005-11-07 19:58 ` [Alsa-devel] " Sergei Shtylylov
2005-11-07 20:19   ` Lee Revell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=43452054.2090305@ru.mvista.com \
    --to=sshtylyov@ru.mvista.com \
    --cc=alsa-devel@lists.sourceforge.net \
    --cc=dan@embeddededge.com \
    --cc=kbaidarov@dev.rtsoft.ru \
    --cc=ppopov@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox