From: Glen Masgai <mimosius@gmx.de>
To: alsa-devel@lists.sourceforge.net
Cc: Clemens Ladisch <clemens@ladisch.de>
Subject: Re: [ALSA - driver 0002159]: ac3 passthrough not working on recent versions
Date: Mon, 19 Jun 2006 19:00:39 +0200 [thread overview]
Message-ID: <4496D837.9070609@gmx.de> (raw)
In-Reply-To: <9bf77025a623d4cebd0491303f7f6f65@bugtrack.alsa-project.org>
Hi Clemens,
I already tried this "rear_swap=1" but AC3-passthrough doesn't work, so
there must be another bug which breaks it.
bugtrack@alsa-project.org schrieb:
> The following issue has been RESOLVED.
> ======================================================================
> <https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2159>
> ======================================================================
> Reported By: nikke
> Assigned To: Clemens Ladisch
> ======================================================================
> Project: ALSA - driver
> Issue ID: 2159
> Category: PCI - ymfpci
> Reproducibility: always
> Severity: minor
> Priority: normal
> Status: resolved
> Distribution: Debian
> Kernel Version: 2.6.15
> Resolution: not fixable
> Fixed in Version:
> ======================================================================
> Date Submitted: 05-24-2006 23:44 CEST
> Last Modified: 06-19-2006 13:33 CEST
> ======================================================================
> Summary: ac3 passthrough not working on recent versions
> Description:
> Using the following AC3 passthrough with mplayer works:
> Linux 2.4.31
> alsa-driver 1.0.8-7 (debian stable packaged)
>
> Using Linux 2.6.15 (both with alsa-driver 1.10rc3 that ships with the
> kernel and
> alsa-driver 1.0.11) it doesn't work. The reciever just says "unlock" and
> stays quiet.
>
> The only change is booting with different kernels, no other config or
> hardware is touched, so this must be a driver regression.
>
> The card is YMF-754 based, connected with coax spdif to my HK reciever.
>
> If you need more info, just tell me and I'll dig it up.
> ======================================================================
>
> ----------------------------------------------------------------------
> Raymond - 06-18-06 13:30
> ----------------------------------------------------------------------
> I don't have this card, you better wait Clemens Ladisch's review.
>
> BTW, Is there any reason why dsnoop is not eanbled ?
>
> The volume per voice feature is hard to use, especially when different
> drivers implement this feature in different ways
> 1) emu10k1 - use index
> 2) ymfpci - use subdevice
>
> Can any of you try speaker-test -Dsurround40 -c 4 -t wav ?
> https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2026
>
>
>
> ----------------------------------------------------------------------
> Clemens Ladisch - 06-19-06 13:33
> ----------------------------------------------------------------------
> My patch indeed broke AC3 passthrough. However, it fixed the incorrect
> channel routing of the rear analog output.
>
> The problem of the swapped rear channels is a bug in either the hardware
> or in the firmware Yamaha provided to us, so the driver has to work around
> it by swapping the rear channels before playing them. The rear channels
> are a resource shared between the rear analog output and the digital
> output, so the channel swapping workaround affects both outputs (although
> the bug itself affects only the analog output).
>
> A later patch added the rear_swap module option so that the user can
> choose which one of the outputs is right. Use "rear_swap=1" to get
> correct AC3 output.
> (This module option probably should be a mixer option.)
>
> Issue History
> Date Modified Username Field Change
> ======================================================================
> 05-24-06 23:44 nikke New Issue
> 05-24-06 23:44 nikke Distribution => Debian
> 05-24-06 23:44 nikke Kernel Version => 2.6.15
> 05-24-06 23:47 nikke Issue Monitored: nikke
> 06-02-06 04:23 Raymond Note Added: 0010045
> 06-02-06 04:25 Raymond Note Edited: 0010045
> 06-12-06 13:14 Mimosius Issue Monitored: Mimosius
> 06-14-06 22:32 nikke Note Added: 0010216
> 06-15-06 02:18 Raymond Note Added: 0010221
> 06-15-06 02:27 Raymond Note Edited: 0010221
> 06-15-06 11:03 Mimosius Note Added: 0010237
> 06-15-06 23:43 nikke Note Added: 0010246
> 06-16-06 13:01 Mimosius Note Added: 0010250
> 06-16-06 13:16 Mimosius Note Edited: 0010250
> 06-16-06 13:26 Raymond Note Added: 0010251
> 06-16-06 13:31 Raymond Note Edited: 0010251
> 06-16-06 13:37 Mimosius Note Added: 0010252
> 06-16-06 16:25 Raymond Note Added: 0010255
> 06-17-06 01:17 nikke Note Added: 0010262
> 06-17-06 02:43 Raymond Note Edited: 0010251
> 06-17-06 10:21 Raymond Note Added: 0010266
> 06-17-06 10:24 Raymond Note Edited: 0010266
> 06-17-06 11:02 Raymond Note Added: 0010267
> 06-17-06 14:25 Raymond Note Added: 0010268
> 06-17-06 15:16 nikke Note Added: 0010269
> 06-17-06 16:10 Raymond Note Added: 0010270
> 06-17-06 16:23 Raymond Note Edited: 0010270
> 06-17-06 18:22 rlrevell Note Added: 0010280
> 06-18-06 04:03 Raymond Note Added: 0010295
> 06-18-06 04:08 Raymond Note Edited: 0010295
> 06-18-06 04:14 Raymond Note Edited: 0010295
> 06-18-06 13:30 Raymond Note Edited: 0010295
> 06-19-06 13:11 Clemens LadischStatus new => assigned
> 06-19-06 13:11 Clemens LadischAssigned To => Clemens Ladisch
> 06-19-06 13:33 Clemens LadischStatus assigned => resolved
> 06-19-06 13:33 Clemens LadischResolution open => not fixable
> 06-19-06 13:33 Clemens LadischNote Added: 0010307
> ======================================================================
>
>
>
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
>
>
>
next prev parent reply other threads:[~2006-06-19 17:00 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-19 11:33 [ALSA - driver 0002159]: ac3 passthrough not working on recent versions bugtrack
2006-06-19 17:00 ` Glen Masgai [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-08-04 0:35 bugtrack
2006-08-03 12:15 bugtrack
2006-06-20 2:56 bugtrack
2006-06-19 20:10 bugtrack
2006-06-19 19:43 bugtrack
2006-06-19 11:11 bugtrack
2006-06-17 16:22 bugtrack
2006-06-17 14:10 bugtrack
2006-06-17 13:16 bugtrack
2006-06-17 12:25 bugtrack
2006-06-17 9:02 bugtrack
2006-06-17 8:21 bugtrack
2006-06-16 23:17 bugtrack
2006-06-16 14:25 bugtrack
2006-06-16 11:37 bugtrack
2006-06-16 11:26 bugtrack
2006-06-16 11:01 bugtrack
2006-06-15 21:43 bugtrack
2006-06-15 9:03 bugtrack
2006-06-15 0:18 bugtrack
2006-06-14 20:32 bugtrack
2006-06-02 2:23 bugtrack
2006-05-24 21:44 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4496D837.9070609@gmx.de \
--to=mimosius@gmx.de \
--cc=alsa-devel@lists.sourceforge.net \
--cc=clemens@ladisch.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox