Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Krzysztof Helt" <krzysztof.h1@wp.pl>
To: alsa-devel@lists.sourceforge.net
Subject: [PATCH] dbri driver cleanup
Date: Sun, 13 Aug 2006 16:14:54 +0200	[thread overview]
Message-ID: <44df33de13c52@wp.pl> (raw)

[-- Attachment #1: Type: text/plain, Size: 601 bytes --]

This is a small clean up of the dbri driver for sparc machines. 

It contains also a fix to DBRI interrupt queue initialization.

Signed-off-by: Krzysztof Helt (krzysztof.h1@wp.pl)

---

This is the first patch for the dbri driver. I plan to rework
this driver at least to the level of OSS dbri driver (16-bit
stereo PCM and no annoying noises during playback).

Regards,
Krzysztof Helt




----------------------------------------------------
Gooorące Last Minute! Egipt, Tunezja, Turcja... Kliknij i zarezerwuj:
http://klik.wp.pl/?adr=http%3A%2F%2Fwycieczki.pasaz.wp.pl&sid=844

[-- Attachment #2: dbri-patch1.diff --]
[-- Type: application/octet-stream, Size: 1779 bytes --]

--- alsa-driver-1.0.12rc2/alsa-kernel/sparc/dbri.c	2006-08-04 14:41:28.000000000 +0200
+++ linux-2.6.17a/sound/sparc/dbri.c	2006-08-13 15:54:44.000000000 +0200
@@ -104,17 +104,15 @@ static char *cmds[] = {
 
 #define dprintk(a, x...) if(dbri_debug & a) printk(KERN_DEBUG x)
 
-#define DBRI_CMD(cmd, intr, value) ((cmd << 28) |			\
-				    (1 << 27) | \
-				    value)
 #else
 #define dprintk(a, x...)
 
-#define DBRI_CMD(cmd, intr, value) ((cmd << 28) |			\
-				    (intr << 27) | \
-				    value)
 #endif				/* DBRI_DEBUG */
 
+#define DBRI_CMD(cmd, intr, value) ((cmd << 28) |	\
+				    (intr << 27) |	\
+				    value)
+
 /***************************************************************************
 	CS4215 specific definitions and structures
 ****************************************************************************/
@@ -690,7 +688,6 @@ static volatile s32 *dbri_cmdlock(struct
 static void dbri_cmdsend(struct snd_dbri * dbri, volatile s32 * cmd)
 {
 	volatile s32 *ptr;
-	u32	reg;
 
 	for (ptr = &dbri->dma->cmd[0]; ptr < cmd; ptr++) {
 		dprintk(D_CMD, "cmd: %lx:%08x\n", (unsigned long)ptr, *ptr);
@@ -709,9 +706,6 @@ static void dbri_cmdsend(struct snd_dbri
 
 	/* Set command pointer and signal it is valid. */
 	sbus_writel(dbri->dma_dvma, dbri->regs + REG8);
-	reg = sbus_readl(dbri->regs + REG0);
-	reg |= D_P;
-	sbus_writel(reg, dbri->regs + REG0);
 
 	/*spin_unlock(&dbri->lock); */
 }
@@ -752,7 +746,7 @@ static void dbri_initialize(struct snd_d
 	 */
 	for (n = 0; n < DBRI_NO_INTS - 1; n++) {
 		dma_addr = dbri->dma_dvma;
-		dma_addr += dbri_dma_off(intr, ((n + 1) & DBRI_INT_BLK));
+		dma_addr += dbri_dma_off(intr, ((n + 1) * DBRI_INT_BLK));
 		dbri->dma->intr[n * DBRI_INT_BLK] = dma_addr;
 	}
 	dma_addr = dbri->dma_dvma + dbri_dma_off(intr, 0);

[-- Attachment #3: Type: text/plain, Size: 373 bytes --]

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

[-- Attachment #4: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel

             reply	other threads:[~2006-08-13 14:14 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-08-13 14:14 Krzysztof Helt [this message]
2006-08-16 11:07 ` [PATCH] dbri driver cleanup Takashi Iwai
  -- strict thread matches above, loose matches on Subject: below --
2007-08-18  6:27 [PATCH] dbri: " Krzysztof Helt
2007-08-20 10:10 ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=44df33de13c52@wp.pl \
    --to=krzysztof.h1@wp.pl \
    --cc=alsa-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox