From: Timur Tabi <timur@freescale.com>
To: Clemens Ladisch <cladisch@fastmail.net>
Cc: ALSA devel <alsa-devel@alsa-project.org>
Subject: Re: How do I tell ALSA that my driver supports every possible sample rate?
Date: Mon, 23 Jul 2007 12:27:31 -0500 [thread overview]
Message-ID: <46A4E503.50207@freescale.com> (raw)
In-Reply-To: <1185210867.7590.1201603759@webmail.messagingengine.com>
Clemens Ladisch wrote:
> To indicate that the PCM device supports all sample rates between the
> minimum and the maximum, set SNDRV_PCM_RATE_CONTINUOUS in addition to
> the other supported bits.
So I should do this:
SNDRV_PCM_RATES_5512 | SNDRV_PCM_RATE_8000_192000 | SNDRV_PCM_RATE_CONTINUOUS
That's not really elegant.
> However, in your case these bits should be set according to the
> capabilities of the codec.
In the codec driver, I do that. With ASOC, each driver specifies its own capabilities,
and ASOC is supposed to reconcile them. My I2S driver is not aware of the codec's
capabilities.
--
Timur Tabi
Linux Kernel Developer @ Freescale
next prev parent reply other threads:[~2007-07-23 17:27 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-23 15:54 How do I tell ALSA that my driver supports every possible sample rate? Timur Tabi
2007-07-23 16:39 ` Liam Girdwood
2007-07-23 17:06 ` Timur Tabi
2007-07-23 17:29 ` Liam Girdwood
2007-07-23 17:14 ` Clemens Ladisch
2007-07-23 17:27 ` Timur Tabi [this message]
2007-07-24 7:14 ` Clemens Ladisch
2007-07-24 14:54 ` Timur Tabi
2007-07-24 15:07 ` Takashi Iwai
2007-07-24 19:30 ` Timur Tabi
2007-07-25 10:18 ` Takashi Iwai
2007-07-25 14:37 ` Timur Tabi
2007-07-25 15:08 ` Takashi Iwai
2007-07-25 15:12 ` Takashi Iwai
2007-07-25 15:24 ` Liam Girdwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46A4E503.50207@freescale.com \
--to=timur@freescale.com \
--cc=alsa-devel@alsa-project.org \
--cc=cladisch@fastmail.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox