From: "Matthew R. Hurne" <matt.hurne@versatile.com>
To: Tobin Davis <tdavis@dsl-only.net>
Cc: alsa-devel@alsa-project.org
Subject: Re: Intel ICH7/Realtek ALC262 on MSI MS-7290 (Crystal 945)
Date: Thu, 31 Jan 2008 13:59:57 -0500 [thread overview]
Message-ID: <47A21AAD.6000203@versatile.com> (raw)
In-Reply-To: <1201763319.23369.61.camel@razman.gruemaster.com>
Tobin Davis wrote:
> Sorry for not getting back sooner. Could you try alsa-1.0.16rc2 with
> the following configuration:
>
> ./configure --with-cards=hda-intel --with-debug=detect && make &&
> sudo make install
>
> After it is installed, type "dmesg" and look for the alsa output
> (line-outs, speakers, etc). Copy that into an email and send it to me,
> please.
>
> Tobin
>
No worries about not getting back sooner - I appreciate you getting back at all!
I've done as you requested, and here is the output of dmesg:
ALSA /root/alsa-driver-1.0.16rc2/alsa-kernel/pci/hda/hda_intel.c:1788: chipset global capabilities = 0x4401
ALSA /root/alsa-driver-1.0.16rc2/alsa-kernel/pci/hda/hda_intel.c:740: codec_mask = 0x1
hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:2863: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0)
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:2867: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:2871: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:2872: mono: mono_out=0x0
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:2880: inputs: mic=0x18, fmic=0x0, line=0x1a, fline=0x0, cd=0x0, aux=0x0
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave Surround Playback Volume, skipped
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave Center Playback Volume, skipped
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave LFE Playback Volume, skipped
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave Side Playback Volume, skipped
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave Headphone Playback Volume, skipped
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave Speaker Playback Volume, skipped
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave Mono Playback Volume, skipped
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave Line-Out Playback Volume, skipped
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave Surround Playback Switch, skipped
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave Center Playback Switch, skipped
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave LFE Playback Switch, skipped
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave Side Playback Switch, skipped
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave Headphone Playback Switch, skipped
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave Speaker Playback Switch, skipped
ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:1079: Cannot find slave Mono Playback Switch, skipped
next prev parent reply other threads:[~2008-01-31 18:59 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-23 16:52 Intel ICH7/Realtek ALC262 on MSI MS-7290 (Crystal 945) Matthew R. Hurne
2008-01-23 16:54 ` Matthew R. Hurne
2008-01-31 7:08 ` Tobin Davis
2008-01-31 18:59 ` Matthew R. Hurne [this message]
2008-02-01 10:10 ` Takashi Iwai
2008-02-04 15:50 ` Matthew R. Hurne
2008-02-04 16:06 ` Takashi Iwai
2008-02-04 22:16 ` Matthew R. Hurne
2008-02-11 22:06 ` Matthew R. Hurne
2008-01-23 18:11 ` Matthew R. Hurne
2008-01-31 1:45 ` Matthew Hurne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47A21AAD.6000203@versatile.com \
--to=matt.hurne@versatile.com \
--cc=alsa-devel@alsa-project.org \
--cc=tdavis@dsl-only.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox