Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: lokowich <lokowich@acdstar.com>
To: ALSA-devel <alsa-devel@alsa-project.org>
Subject: [Fwd: Re: Davinci ASoC support (patch)]
Date: Fri, 28 Mar 2008 09:27:04 -0500	[thread overview]
Message-ID: <47ED0038.9020808@acdstar.com> (raw)

Forwarded from davinci-linux-open-source list:

I've built this ASoC patch into my DaVinci git kernel (thanks for the 
SENSORS tip), and can use aplay and speaker-test, but no sound.  Figured 
it may be a mixer/volume control issue, but the alsamixer is unable to 
open for a failed ioctl on USBDEVFS_IOCTL.  Not sure why there is a USB 
dependency.  Noted that there is no /sys/class/sound/mixer in my sysfs.  
Any ideas?

Mark

Bernard Blackham wrote:
> Behme wrote:
>   
>> While searching something different, I just found
>>
>> http://www.spinics.net/lists/alsa-devel/msg12535.html
>>
>> As I'm not subscribed to alsa-devel, I don't have the original post. 
>> Maybe any of the authors can post it do this list as well?
>>
>> The patch mainly applies to our git. I fixed two small rejects in 
>> Kconfig and Makefile as the patch is for newer kernel than our git. 
>> Untested patch against our git in attachment. Anybody likes to test?
>>     
>
> Well, I tried compiling it and it failed to build. It appears that it's 
> built on a set of patches for Davinci posted to LAK, including this 
> completely revamped EDMA support[1]:
>
> http://www.spinics.net/lists/arm-kernel/msg47450.html
>
> So I had to change a few definitions, import a few functions from the new
> DMA support and managed to get it compiling and loading, but not yet working
> (tried various sample rates and formats):
>
> root@davinci-dvevm:/tst$ aplay test.wav
> Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
> ALSA lib pcm_params.c:2152:(snd_pcm_hw_refine_slave) Slave PCM not usable
> aplay: set_params:878: Broken configuration for this PCM: no configurations
> available
>
> root@davinci-dvevm:/tst$ arecord -r 48000 -f S16_LE
> Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
> ALSA lib pcm_params.c:2152:(snd_pcm_hw_refine_slave) Slave PCM not usable
> arecord: set_params:878: Broken configuration for this PCM: no
> configurations available
>
>
> And this is the extent of my knowledge of ALSA - I can continue digging, but
> maybe somebody else will beat me to it =) It's looking promising though.
>
> Attached is the patch I have so far that applies against current git. This
> is not for going upstream, but just for testing. Notes:
> - Apply patch
> - Enable SND_SOC, SND_DAVINCI_SOC, SND_DAVINCI_SOC_I2S, SND_DAVINCI_SOC_EVM
> and SND_SOC_TLV320AIC3X.
> - Make sure CONFIG_I2C_DAVINCI is enabled, but disable the
> CONFIG_SENSORS_TLV320* options.
> - Build.
> - Load the snd-soc-evm module.
>
> Bernard.
>
> [1] These patches appear to have gone absolutely nowhere beyond that list. I
> can't find them in any tree. But they are cleaner and more conforming to the
> Linux Kernel style than what's currently in git.
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> Davinci-linux-open-source mailing list
> Davinci-linux-open-source@linux.davincidsp.com
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
>   

             reply	other threads:[~2008-03-28 14:27 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-28 14:27 lokowich [this message]
2008-03-28 15:03 ` [Fwd: Re: Davinci ASoC support (patch)] Mark Brown
2008-03-28 15:39   ` Any wigets for ADC to DAC ? Alexandre BOUIN
2008-03-28 16:46   ` ALSA Lib : snd_dlopen lib error Alexandre BOUIN
2008-03-28 23:13   ` [Fwd: Re: Davinci ASoC support (patch)] Vova Barinov
     [not found]     ` <47F0E8C0.5070907@acdstar.com>
2008-04-01 20:08       ` Vova Barinov
  -- strict thread matches above, loose matches on Subject: below --
2008-03-31 20:30 lokowich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47ED0038.9020808@acdstar.com \
    --to=lokowich@acdstar.com \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox