Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Gustavo da Silva Serra <gustavo.serra@tet.com.br>
To: alsa-devel@alsa-project.org
Subject: Re: Problem with aloop
Date: Tue, 13 May 2008 08:51:39 -0300	[thread overview]
Message-ID: <482980CB.5070601@tet.com.br> (raw)
In-Reply-To: <d5eabee70805130043s79f68c8yf5e971d147827360@mail.gmail.com>

I had some problems until I could figure it out how to configure alsa 
properly in /etc/asound.conf. Maybe this could be your problem? What is 
your alsa version? I heard that aloop didn't work well until 1.0.15, or 
such (alsa guys: is this true?).

Benjamin van den Hout escreveu:
> Gustavo da Silva Serra wrote:
>
> Well, I discovered that only xinelib has this problem. Xmms and
>   
>> alsaplayer, for example, don't have this issue. I am testing VLC and it
>> seems to work fine. I am not surprised, since the xine source code that
>> deals with alsa is huge and ugly, it must be very hard to mantain that.
>>
>>     
>
> Thanks for your reply! I did some more testing and I can reproduce it as
> well with the 8bit mode, it occurrs less frequently. When I switch back to
> 16 bit it takes only a few tries with aplay to get the hiccups. So it seems
> it is a bit more tricky than I initially thought. Xine can be a strange
> beast some times, so that's why I used aplay as well. Anybody have some more
> ideas how to tackle this problem or point me in the right direction so I can
> solve it myself? It seems I am so close to a working solution...
>
> Kind regards,
> Benjamin
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
> __________ NOD32 3095 (20080513) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>
>
>   


-- 
Gustavo da Silva Serra        gustavo.serra@tet.com.br
———————————————————————————
Tools & Technologies - T&T Engenheiros Associados Ltda.
Projetos de SW & HW - Desenvolvendo soluções.
Rua Riachuelo, 1098 Conj. 1204
Centro - Porto Alegre - CEP 90010-272
Fone DDR: (51)3220-3290
Fone/Fax: (51)3220-3220 / 3220-3206
http://www.tet.com.br/                                             tet@tet.com.br

  reply	other threads:[~2008-05-13 11:51 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-13  7:43 Problem with aloop Benjamin van den Hout
2008-05-13 11:51 ` Gustavo da Silva Serra [this message]
  -- strict thread matches above, loose matches on Subject: below --
2008-05-13 13:27 Benjamin van den Hout
2008-05-13 13:45 ` Gustavo da Silva Serra
2008-05-14  8:35 ` Benjamin van den Hout
2008-05-09 12:46 Benjamin van den Hout
2008-05-09 12:56 ` Gustavo da Silva Serra
2008-04-30 20:27 Gustavo da Silva Serra
2008-02-20 14:19 [PATCH] improved snd-aloop quality when using certain samplerates and kernel HZ Ahmet İnan
2008-02-20 16:08 ` Takashi Iwai
2008-02-21  0:06   ` Ahmet İnan
2008-02-21  6:54     ` Takashi Iwai
2008-02-22 18:05       ` Ahmet İnan
2008-02-28 11:48         ` Takashi Iwai
2008-03-01 11:55           ` Ahmet İnan
2008-03-01 15:22             ` Takashi Iwai
2008-03-01 23:35               ` Ahmet İnan
2008-03-06 15:51                 ` Takashi Iwai
2008-05-31 20:00                   ` Problem with aloop Ahmet İnan
2008-06-01 16:15                     ` Benjamin van den Hout
2008-06-02  8:08                       ` Ahmet İnan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=482980CB.5070601@tet.com.br \
    --to=gustavo.serra@tet.com.br \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox