From: Michael Hirsch <m.hirsch@phase-zero.de>
To: Alsa-devel@alsa-project.org
Subject: set_params:1073: not enough memory
Date: Tue, 13 Jan 2009 13:11:33 +0100 [thread overview]
Message-ID: <496C84F5.9020407@phase-zero.de> (raw)
Hello all,
I'm trying to get alsa 1.0.18 working on a ARM PXA processor and I'm
stuck with the following error message:
aplay /Sinus.raw -fcd
Playing raw data '/Sinus.raw' : Signed 16 bit Little Endian, Rate 44100
Hz, Stereo
aplay: set_params:1073: not enough memory
alsa kernel was compiled with alsa 1.0.16, alsa.conf, located in
/usr/share/alsa is the basic:
pcm.!default {
type hw
card 0
}
ctl.!default {
type hw
card 0
}
also aplay -l and alsaconf store show the message:
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL hw:0
However the card shows up /proc/asound/cards and alsamixer is able to
access it.
Any ideas?
Best regards
Michael
next reply other threads:[~2009-01-13 12:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-13 12:11 Michael Hirsch [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-01-29 22:43 set_params:1073: not enough memory maarten van es
2009-02-02 13:14 ` Takashi Iwai
2009-02-20 22:18 ` maarten van es
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=496C84F5.9020407@phase-zero.de \
--to=m.hirsch@phase-zero.de \
--cc=Alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox