From: LCID Fire <lcid-fire@gmx.net>
To: Alsa-devel <alsa-devel@alsa-project.org>
Subject: [PATCH] Replace hardcoded hexa formating
Date: Fri, 23 Jan 2009 23:42:19 +0100 [thread overview]
Message-ID: <497A47CB.3050501@gmx.net> (raw)
[-- Attachment #1: Type: text/plain, Size: 69 bytes --]
The attached patch replaces the hardcoded hexa formats in usbaudio.c
[-- Attachment #2: commit-079e4ef --]
[-- Type: text/plain, Size: 3598 bytes --]
commit 079e4efba0603e7a32bf1d352d98c2b265b91cd6
Author: LCID Fire <lcid-fire@gmx.net>
Date: Fri Jan 23 23:39:06 2009 +0100
Rather use printf format instead of hardcoding it.
A next step would be to predefine certain formats.
Signed-off-by: Andreas Bergmeier <lcid-fire@gmx.net>
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index bbd70d5..77ac5c9 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -1292,14 +1292,14 @@ static int init_usb_sample_rate(struct usb_device *dev, int iface,
if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), SET_CUR,
USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
SAMPLING_FREQ_CONTROL << 8, ep, data, 3, 1000)) < 0) {
- snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep 0x%x\n",
+ snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
dev->devnum, iface, fmt->altsetting, rate, ep);
return err;
}
if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), GET_CUR,
USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_IN,
SAMPLING_FREQ_CONTROL << 8, ep, data, 3, 1000)) < 0) {
- snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep 0x%x\n",
+ snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
dev->devnum, iface, fmt->altsetting, ep);
return 0; /* some devices don't support reading */
}
@@ -1468,7 +1468,7 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream,
channels = params_channels(hw_params);
fmt = find_format(subs, format, rate, channels);
if (!fmt) {
- snd_printd(KERN_DEBUG "cannot set format: format = 0x%x, rate = %d, channels = %d\n",
+ snd_printd(KERN_DEBUG "cannot set format: format = %#x, rate = %d, channels = %d\n",
format, rate, channels);
return -EINVAL;
}
@@ -2160,7 +2160,7 @@ static void proc_dump_substream_formats(struct snd_usb_substream *subs, struct s
fp = list_entry(p, struct audioformat, list);
snd_iprintf(buffer, " Interface %d\n", fp->iface);
snd_iprintf(buffer, " Altset %d\n", fp->altsetting);
- snd_iprintf(buffer, " Format: 0x%x\n", fp->format);
+ snd_iprintf(buffer, " Format: %#x\n", fp->format);
snd_iprintf(buffer, " Channels: %d\n", fp->channels);
snd_iprintf(buffer, " Endpoint: %d %s (%s)\n",
fp->endpoint & USB_ENDPOINT_NUMBER_MASK,
@@ -2180,7 +2180,7 @@ static void proc_dump_substream_formats(struct snd_usb_substream *subs, struct s
snd_iprintf(buffer, "\n");
}
// snd_iprintf(buffer, " Max Packet Size = %d\n", fp->maxpacksize);
- // snd_iprintf(buffer, " EP Attribute = 0x%x\n", fp->attributes);
+ // snd_iprintf(buffer, " EP Attribute = %#x\n", fp->attributes);
}
}
@@ -2619,7 +2619,7 @@ static int parse_audio_format_ii(struct snd_usb_audio *chip, struct audioformat
fp->format = SNDRV_PCM_FORMAT_MPEG;
break;
default:
- snd_printd(KERN_INFO "%d:%u:%d : unknown format tag 0x%x is detected. processed as MPEG.\n",
+ snd_printd(KERN_INFO "%d:%u:%d : unknown format tag %#x is detected. processed as MPEG.\n",
chip->dev->devnum, fp->iface, fp->altsetting, format);
fp->format = SNDRV_PCM_FORMAT_MPEG;
break;
@@ -2817,7 +2817,7 @@ static int parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
continue;
}
- snd_printdd(KERN_INFO "%d:%u:%d: add audio endpoint 0x%x\n", dev->devnum, iface_no, altno, fp->endpoint);
+ snd_printdd(KERN_INFO "%d:%u:%d: add audio endpoint %#x\n", dev->devnum, iface_no, altno, fp->endpoint);
err = add_audio_endpoint(chip, stream, fp);
if (err < 0) {
kfree(fp->rate_table);
[-- Attachment #3: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next reply other threads:[~2009-01-23 22:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-23 22:42 LCID Fire [this message]
2009-01-26 9:04 ` [PATCH] Replace hardcoded hexa formating Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=497A47CB.3050501@gmx.net \
--to=lcid-fire@gmx.net \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox